An unexpected allomer of chlorophyll: 13(S)-hydroxy-10-methoxychlorophyll b

The allomerization of chlorophyll b in methanol produced 13²(S)-hydroxy-10-methoxychlorophyll b in a yield of ca. 8%. The formation of this allomer was totally unexpected, as 10-substituted chlorophylls have never been reported before. The structure of the new chlorophyll b derivative was determined on the basis of UV/Vis, FAB-MS, ¹H NMR and 2D ROESY NMR spectra. This letter focuses on the NMR analysis.     

Synthesis of the Deuterium Labeled Isoflavone-<Emphasis Type="Italic">O</Emphasis>-glucoside 8,3′,5′-D<Subscript>3</Subscript>-Daidzin

The regio- and stereospecific glycosylation of 8,3′,5′-trideuterodaidzein 1 with α-acetobromoglucose to provide 8,3′,5′-trideuterodaidzein-7-O-β-glucopyranoside 2 is presented.     

Regioselective Mono-<Emphasis Type="Italic">O</Emphasis>-Carboxymethylation of Polyhydroxyisoflavones

Optimized conditions are described for the regioselective mono-O-alkylation of daidzein 1a, genistein 1b, and biochanin A 1c with ethyl bromoacetate.     

Preparation of cellulose nanofibers with hydrophobic surface characteristics

The aim of this study was to develop cellulose nanofibers with hydrophobic surface characteristics using chemical modification. Kenaf fibers were modified using acetic anhydride and cellulose nanofibers were isolated from the acetylated kenaf using mechanical isolation methods. Fourier transform infrared spectroscopy (FTIR) indicated acetylation of the hydroxyl groups of cellulose. The study of the dispersion demonstrated that acetylated cellulose nanofibers formed stable, well-dispersed suspensions in both acetone and ethanol. The contact angle measurements showed that the surface characteristics of nanofibers were changed from hydrophilic to more hydrophobic when acetylated. The microscopy study showed that the acetylation caused a swelling of the kenaf fiber cell wall and that the diameters of isolated nanofibers were between 5 and 50 nm. X-ray analysis showed that the acetylation process reduced the crystallinity of the fibers, whereas mechanical isolation increased it. The method used provides a novel processing route for producing cellulose nanofibers with hydrophobic surfaces.     

Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites

A simple method for preparing redispersible nanofibers from sugar beet residue and their use as a well-dispersed reinforcement for a polyvinyl alcohol (PVA) matrix is reported. It is known that the redispersion of dried cellulose nanofibers is difficult because of the formation of strong hydrogen bonds between the nanofibers. The results show that the properties of the initial sugar beet nanofiber suspension can be recovered without the use of chemical modification or additives with higher pectin and hemicellulose content. Undried and redispersed nanofibers with and without pectin were used as nanocomposite reinforcement with PVA. The redispersed nanofibers were as good reinforcements as the undried nanofibers. The tensile strength and elastic modulus of the nanocomposites with the redispersed sugar beet nanofibers were as good as those of the nanocomposites with undried nanofibers. Interestingly, the nanofiber dispersion in the PVA matrix was better when sugar beet nanofibers containing pectin and hemicellulose were used as reinforcements.     

Versatile bio-ink for covalent immobilization of chimeric avidin on sol-gel substrates

A bio-ink for covalent deposition of thermostable, high affinity biotin-binding chimeric avidin onto sol-gel substrates was developed. The bio-ink was prepared from heterobifunctional crosslinker 6-maleimidohexanoic acid N-hydroxysuccinimide which was first reacted either with 3-aminopropyltriethoxysilane or 3-aminopropyldimethylethoxysilane to form silane linkers 6-maleimide-N-(3-(triethoxysilyl)propyl)hexanamide or -(ethoxydimethylsilyl)propyl)-hexanamide. C-terminal cysteine genetically engineered to chimeric avidin was reacted with the maleimide group of silane linker in methanol/PBS solution to form a suspension, which was printed on sol-gel modified PMMA film. Different concentrations of chimeric avidin and ratios between silane linkers were tested to find the best properties for the bio-ink to enable gravure or inkjet printing. Bio-ink prepared from 3-aminopropyltriethoxysilane was found to provide the highest amount of active immobilized chimeric avidin. The developed bio-ink was shown to be valuable for automated fabrication of avidin-functionalized polymer films.     

Asymmetric synthesis, stereochemistry and rearrangement reactions of naturally occurring 7'-hydroxylignano-9,9'-lactones

The asymmetric synthesis of a series of (7'S,8R,8'R)-7'-hydroxylignano-9,9'-lactones is presented, among them the mammalian lignan (7'S)-hydroxyenterolactone and (7'S)-parabenzlactone, allowing the stereochemistry of natural occurring (-)-parabenzlactone to be re-assigned. A hydroxylactone rearrangement and its possible mechanisms are discussed. Finally a brief survey of the current naming and numbering variants of 7'-hydroxylignano-9,9'-lactones is presented, along with a suggestion for harmonization of the nomenclature.     

Expedient deuterolabeling of polyphenols in ionic liquids-DCl/D2O under microwave irradiation

Postsynthetic regioselective aromatic ring H/D exchanges in polyphenolic compounds are rapidly performed in high yields and isotopic purities in ionic liquid-DCl/D2O under microwave irradiation. Other C-H bonds, including benzylic and lactone alpha-carbonyl sites, are not affected.     

Rheological properties of nanocellulose suspensions: effects of fibril/particle dimensions and surface characteristics

The rheological properties of aqueous suspensions based on three different nanocelluloses were compared. One system was obtained via acid hydrolysis (thus yielding crystalline nanocellulose, CNC) and the other two from mechanical shearing, but from different origins and subjected to different pretreatments. Of the latter two, one was considered to be a rather typical cellulose nanofibril (CNF) suspension whereas the other was a kind of intermediate between CNF and CNC. All three nanocellulose elements differed in dimensions as evident from transmission electron microscopy and atomic force microscopy. With regard to the length of the fibrils/particles, the three nanocelluloses formed three distinct groups with lengths between 200 and slightly more than 800 nm. The three cellulosic elements were also subjected to a TEMPO-mediated oxidation yielding a similar carboxylate content in the three systems. Furthermore, the TEMPO-oxidized elements were grafted with poly(ethylene glycol) (PEG). The amount of grafted PEG was about 35 wt%. The shear viscosity, the storage modulus and the loss modulus of suspensions of the unmodified, the TEMPO-oxidized and the grafted nanocelluloses were determined at room temperature and the solids content of the suspensions was varied between 0.7 and 2.0 wt%. It was concluded that the rheological properties varied significantly between the suspensions depending on the dimensions of the cellulosic elements and their surface characteristics. In this context, the length (or the aspect ratio) of the particles played a very important role.     

Comparison of Experimental Strategies to Study l-Type Amino Acid Transporter 1 (LAT1) Utilization by Ligands

l-Type amino acid transporter 1 (LAT1), expressed abundantly in the brain and placenta and overexpressed in several cancer cell types, has gained a lot of interest in drug research and development, as it can be utilized for brain-targeted drug delivery, as well as inhibiting the essential amino acid supply to cancer cells. The structure of LAT1 is today very well-known and the interactions of ligands at the binding site of LAT1 can be modeled and explained. However, less is known of LAT1′s life cycle within the cells. Moreover, the functionality of LAT1 can be measured by several different methods, which may vary between the laboratories and make the comparison of the results challenging. In the present study, the usefulness of indirect cis-inhibition methods and direct cellular uptake methods and their variations to interpret the interactions of LAT1-ligands were evaluated. Moreover, this study also highlights the importance of understanding the intracellular kinetics of LAT1-ligands, and how they can affect the regular function of LAT1 in critical tissues, such as the brain. Hence, it is discussed herein how the selected methodology influences the outcome and created knowledge of LAT1-utilizing compounds.