Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Preparation of micro- and nanopatterns of polymer chains grafted onto flexible polymer substrates

In this work a simple novel method for preparing micro- and nanoscale patterns of polymer chains grafted onto flexible polymer substrates is described. A combination of the two techniques of radiation grafting and "grafting-from" has been made. This combination makes it possible to prepare grafted structures having micro- or nanoscale lateral dimensions that are determined by the electron beam or X-ray irradiation patterns used. The height of the grafted features can be controlled by the irradiation dose or such grafting reaction conditions as time, temperature, or monomer concentration. Our first results for nanopatterned samples demonstrate resolution comparable to those of other polymer-based lithography processes.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Experimental investigation and optimization of loop heat pipe performance with nanofluids

Journal of Thermal Analysis and Calorimetry - High heat generation from electronic devices needs to cool down properly to prevent overheating. Loop heat pipe (LHP) is one of the excellent cooling...     

Synthesis,method optimization,anticancer activity of 2,3,7-trisubstituted Quinazoline derivatives and targeting EGFR-tyrosine kinase by rational approach: 1st Cancer Update

A novel 3-(substituted benzylideneamino)-7-chloro-2-phenyl quinazoline-4(3H)-one (7–27) has been synthesized and characterised by IR, ¹H NMR, ¹³C NMR spectroscopy, and elemental analysis. We changed the methodology for the synthesis of 3-amino 7-chloro-2-phenyl quinazolin-4(3H)-one 6 to fusion reaction at 250 °C, instead of using solvent, to avoid the problem of ring opening, which is commonly observed while synthesizing quinazolines from benzoxazinone. NCI selected, 7-chloro-3-{[(4-chlorophenyl) methylidene] amino}-2-phenylquinazolin-4(3H)-one 12, with GI₅₀ value of ?5.59 M, TGI value of ?5.12 M, and LC₅₀ value of ?4.40 M showed remarkable activity against CNS SNB-75 Cancer cell line. Rational approach and QSAR techniques enabled the understanding of the pharmacophoric requirement for 2,3,7-tri substituted quinazoline derivatives to inhibit EGFR-tyrosine kinase as antitumor agents and could be used as an excellent framework in this field that may lead to discovery of potent anti tumor agent.     

Methoxy-Substituted Tyramine Derivatives Synthesis,Computational Studies and Tyrosinase Inhibitory Kinetics

Targeting tyrosinase for melanogenesis disorders is an established strategy. Hydroxyl-substituted benzoic and cinnamic acid scaffolds were incorporated into new chemotypes that displayed in vitro inhibitory effects against mushroom and human tyrosinase for the purpose of identifying anti-melanogenic ingredients. The most active compound 2-((4-methoxyphenethyl)amino)-2-oxoethyl (E)-3-(2,4-dihydroxyphenyl) acrylate (Ph9), inhibited mushroom tyrosinase with an IC₅₀ of 0.059 nM, while 2-((4-methoxyphenethyl)amino)-2-oxoethyl cinnamate (Ph6) had an IC₅₀ of 2.1 nM compared to the positive control, kojic acid IC₅₀ 16700 nM. Results of human tyrosinase inhibitory activity in A375 human melanoma cells showed that compound (Ph9) and Ph6 exhibited 94.6% and 92.2% inhibitory activity respectively while the positive control kojic acid showed 72.9% inhibition. Enzyme kinetics reflected a mixed type of inhibition for inhibitor Ph9 (K_i 0.093 nM) and non-competitive inhibition for Ph6 (K_i 2.3 nM) revealed from Lineweaver–Burk plots. In silico docking studies with mushroom tyrosinase (PDB ID:2Y9X) predicted possible binding modes in the catalytic site for these active compounds. Ph9 displayed no PAINS (pan-assay interference compounds) alerts. Our results showed that compound Ph9 is a potential candidate for further development of tyrosinase inhibitors.     

A Study on the Growth of Cr2O3 in Ordered Mesoporous Silica and Its Replication

A systematic study on the growth of Cr₂O₃ in three‐dimensional cubic ordered mesoporous silica (KIT‐6) and its replication through nanocasting is reported. By changing the loading time and amount of precursor, the size and shape of the obtained replica could be controlled to some extent. More interestingly, in contrast to previously published studies, when KIT‐6 with an aging temperature of 100 °C, which has a high degree of interconnectivity, was used as a hard template, a cubic ordered mesoporous Cr₂O₃ replica with an open uncoupled subframework structure and reduced symmetry was obtained. Formation of a replica with different symmetry and uncoupled subframework structure is not only related to the degree of interconnectivity of the parent, but also strongly depends on the type of metal oxide and its growth mechanism in the silica template. Nanocasting of Cr₂O₃ with a low loading results in a replica with monomodal pore size distribution that has same symmetry as the hard template, whereas increasing the loading amount alters the symmetry of the replica and yields a replica with bimodal distribution.     

A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C–H Bond Activation

Direct selective oxidation of hydrocarbons to oxygenates by O₂ is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C−H bonds at benzylic positions. In this work, stable, lead-free, Cs₃Bi₂Br₉ halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C−H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C₅ to C₁₆ including aromatic and aliphatic alkanes) with a conversion rate up to 32900 μmol g_cat⁻¹ h⁻¹ and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, in situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2–5 nm) possess enhanced electron–hole separation and a close contact with hydrocarbons that facilitates C(sp³)−H bond activation by photoinduced charges.