Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

A novel greener glycosidation using an acid-ionic liquid containing a protic acid

The glycosidations of glucopyranosyl diethyl phosphite and alcohols using an ionic liquid, 1-n-hexyl-3-methylimidazolium trifluoromethanesulfonimidide (C₆mim[NTf₂]) containing a protic acid, trifluoromethanesulfonimide (HNTf₂), as a novel solvent-catalyst system, effectively proceeded under mild conditions to give the corresponding glycosides in good to high yields. Furthermore, this acid-ionic liquid combination could be reused many times for the glycosidations without any loss in efficiency.     

Synthesis of spherical and hemispherical sugar‐containing poly(ornithine) dendrimers

A novel sugar‐containing poly(ornithine) dendrimer is synthesized for possible antigen delivery and related applications. The dendrimer contains an ornithine dendron as interior scaffolding and oligosaccharides on the periphery, which provide an attachment site for a peptide antigen. Maltose or lactose is bound to both hemispherical and spherical poly(ornithine) dendrimer generation 3 (G3) by reductive amination between its reducing end and the peripheral amino group of the dendrimer using a borane‐pyridine complex in a buffer solution at 50 °C. The degree of substitution of sugar is changed by varying the molar ratio of sugar to dendrimer. When the surface of spherical poly(ornithine) dendrimer G3 is modified by binding β‐alanine to the 16 amino groups, highly substituted maltose‐ or lactose‐β‐alanine‐poly(ornithine) dendrimer G3 is obtained in high yield after 7 days of reaction. The structures of these sugar‐containing dendrimers are characterized by NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1400–1414, 2004     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Determination of trace moisture in hydrogen chloride gas by Karl Fischer titration

Moisture of several ppm in hydrogen chloride gas has been accurately determined by a new method using the Karl Fischer reagent, which hitherto had a limitation in accuracy because of a partial reaction with hydrogen chloride when direct titration was employed.The moisture in the sample gas was collected in a cold trap kept at about ?80 °C while the hydrogen chloride gas passed through and the frozen moisture was dissolved by pyridine-methanol (1:1) solvent. a KF Reagent of factoe: 0.35 mg H₂O/ml.Titration by the Karl Fischer reagent having the equivalency factor of, e.g., 0.5 mg H₂O/ml was carried out and the concentration of the moisture was calculated from the sample volume used.     

Preparation and characterization of modified 3-aminopropylsilyl silica phases with 1,8-naphthalic anhydrides in HPLC

Modified 3-aminopropylsilyl silica stationary phases with 1,8-naphthalic anhydrides [3-(1,8-naphthalimido)propyl (NAIP), 3-(4-amino-1,8-naphthalimido)propyl (4A-NAIP), 3-(3-nitro-1,8-naphthalimido)propyl (3N-NAIP), and 3-(4-nitro-1,8-naphthalimido)propyl modified silyl silica gel (4N-NAIP)] are prepared in a single reaction. Chromatographic properties of these phases are characterized using various solutes including monosubstituted benzenes, alkyl benzenes, and polycyclic aromatic hydrocarbons (PAHs) in high-performance liquid chromatography. Even though the retention in these NAIPs is mainly based on the reversed-phase mode, 3N- and 4N-NAIP show a remarkable recognition toward aromatic hydrocarbons, which is attributed to their strong pi-pi interaction. Furthermore, the recognition ability is according to the molecular planarity and non-linearity of PAHs. Subsequently, 3N- and 4N-NAIP has a distinct selectivity from octadecyl silica and, therefore, will be a valuable alternative for a separation or a solid-phase extraction of aromatic compounds.     

Aggregated structure analysis of polymer-protected platinum/ruthenium colloidal dispersions using EXAFS, HRTEM, and electron diffraction measurements

Polymer-protected platinum/ruthenium colloidal dispersions were prepared by refluxing mixed solutions of hexachloroplatinic(IV) acid and ruthenium(III) chloride in a mixture of ethanol/water (1/1 v/v) in the presence of poly(N-vinyl-2-pyrrolidone). The electronic spectra and transmission electron micrographs suggested that the colloidal dispersions are almost composed of the mixture of the small monometallic Pt and Ru clusters over all the ratio of Pt/Ru compositions. Extended X-ray absorption fine structure analyses and high resolution electron microprobe analyses indicated that no Pt/Ru alloy clusters exist in the dispersions, and the aggregation occurs between small monometallic Pt clusters (diameter ca. 15 A) and partially oxidized Ru microclusters (diameter less than 10 A). Electron diffraction measurements also suggested that the diffraction pattern of aggregated Pt/Ru cluster particles prepared by the simultaneous reduction of Pt and Ru ions is the same as that of the physical mixture of the small monometallic Pt and Ru clusters separately prepared. Therefore, it can be concluded that the aggregated Pt/Ru cluster particles, with 10 to 60 A in diameter, are built up by small monometallic Pt clusters and partially oxidized Ru microclusters, and that Pt/Ru alloy clusters are not formed.     

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.     

Evaluation of dissociation constants of ammonium ion in aqueous lithium perchlorate and lithium chloride-sodium chloride mixed solutions

The Pitzer approach has been applied to the evaluation of dissociation constants of ammonium ion in lithium perchlorate and lithium chloride-sodium chloride mixed solutions at 25°C. The calculated values showed good agreement with the observed values, provided all the higher-order interaction terms ('s and 's) concerned were introduced. The unknown (NH₄LiClO₄) value was determined from the isopiestic measurements of NH₄ClO₄–LiClO₄ mixed solutions. Parameters in the Pitzer formalism for ammonia-ion interactions involved in LiCl and NaCl media were determined by use of the activity coefficients of ammonia measured in LiCl–NaCl mixed solutions by a transpiration method.