Epoxyquinol A, a highly functionalized pentaketide dimer with antiangiogenic activity isolated from fungal metabolites

A unique pentaketide dimer structure of a novel fungal metabolite with antiangiogenic activity, designated as epoxyquinol A (1), was determined on the basis of NMR spectral data as well as the X-ray crystallographic analysis. 1 inhibits the endothelial migration induced by vascular endothelial growth factor (ED100 = 3 mug/mL).     

Study on radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. I. Radiation-induced polymerization of styrene adsorbed on several inorganic substances

The radiation-induced polymerization of styrene adsorbed on silica gel, white carbon, silicic acid anhydride, zeolite, and activated alumina was carried out to elucidate the effect of properties of inorganic substances on the polymerization. The rate of adsorbed state polymerization on these inorganic substances was very fast in comparison with that of bulk-state polymerization. The amount of unextractable polymer depends on the specific surface area and chemical compositions of these inorganic substances. Inorganic substances which contain aluminum as a component element are more likely to be grafted than those which consist of SiO₂ alone. The molecular weight and molecular weight distribution of unextractable polymer and extractable polymer differ from one another in each inorganic substance. In case of silicic acid anhydride, unextractable polymer has smaller molecular weight than extractable polymer. These results suggest that unextractable polymer cannot be extracted due to chemical bonds with the inorganic surface.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VIII. Polymerization of styrene and methyl methacrylate adsorbed on aerosil

Aerosil is silica having a purity which is very high compared with that of silica gel and having, unlike silica gel, no micropores. To investigate the effects of impurities and micropores on the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on silica gel, the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on Aerosil was carried out. The results of both the styrene–Aerosil 300 system and the methyl methacrylate–Aerosil 300 system were similar to those of the styrene–silica gel and methyl methacrylate–silica gel systems, respectively. This suggests that in the radiation-induced polymerization of both styrene–silica gel and methyl methacrylate–silica gel systems the impurity and the presence of micropores have almost no effects on the reaction mechanism. The effect of aluminum as an impurity was investigated on the styrene–Aerosil MOX 170 system. It was found that aluminum accelerated the cationic polymerization.     

Efficiency of connected binary block designs when a single observation is unavailable

In this paper the problem of finding the design efficiency is considered when a single observation is unavailable in a connected binary block design. The explicit expression of efficiency is found for the resulting design when the original design is a balanced incomplete block design or a group divisible, singular or semiregular or regular with ₁>0, design. The efficiency does not depend on the position of the unavailable observation. For a regular group divisible design with ₁>0, the efficiency depends on the position of the unavailable observation. The bounds, both lower and upper, on the efficiency are given in this situation. The efficiencies of designs resulting from a balanced incomplete block design and a group divisible design are in fact high when a single observation is unavailable.The work of the first author is sponsored by the Air Force Office of Scientific Research under Grant AFOSR-90-0092.On leave from Indian Statistical Institute, Calcutta, India. The work of the third author was supported by a grant from the CMDS, Indian Institute of Management, Calcutta.     

Cationic carbohydroxylation of alkenes and alkynes using the cation pool method

The reactions of an N-acyliminium ion pool with alkenes and alkynes gave gamma-amino alcohols and beta-amino carbonyl compounds, respectively, after treatment with H(2)O/Et(3)N. The present reaction serves as an efficient method for cationic carbohydroxylation of alkenes and alkynes. When vinyltrimethylsilane was used as an alkene, the reaction was highly diastereoselective and served as an access to an enantiomerically pure alpha-silyl-gamma-amino alcohol. [reaction: see text]     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. X. Influence of H2O on the styrene–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of the styrene—silica gel system, the influence of H₂O as adsorbed water and inhibitor of cationic polymerization was investigated by two methods. Monomer conversion decreased as H₂O increased. In general, percent grafting decreased as H₂O increased, but the presence of a small amount of H₂O increased the percent grafting. Grafting at 16 Mrad has a maximum value at a water content of about 0.2%. This seems to be due to two effects of H₂O: percent grafting increases due to restraint of cationic polymerization by H₂O, but the percent grafting decreases due to adsorption water which interrupts the contact of styrene with silica gel. In GPC spectra, the low molecular weight peaks of both graft polymers and homopolymers decreased when H₂O was added. The GPC results suggest that the number of positive holes which initiate cationic polymerization is very large.     

Mechanism of Macroscopic Motion of Oleate Helical Assemblies: Cooperative Deprotonation of Carboxyl Groups Triggered by Photoisomerization of Azobenzene Derivatives

Macroscopic and spatially ordered motions of self‐assemblies composed of oleic acid and a small amount of an azobenzene derivative, induced by azobenzene photoisomerization, was previously reported. However, the mechanism of the generation of submillimeter‐scale motions by the nanosized structural transition of azobenzene was not clarified. Herein, an underlying mechanism of the motions is proposed in which deprotonation of carboxyl groups in cooperation with azobenzene photoisomerization causes a morphological transition of the self‐assembly, which in turn results in macroscopic forceful dynamics. The photoinduced deprotonation was investigated by potentiometric pH titration and FTIR spectroscopy. The concept of hierarchical molecular interaction generating macroscale function is expected to promote the next stage of supramolecular chemistry.     

The First Catalytic Synthesis of an Acrylate from CO2 and an Alkene—A Rational Approach

For more than three decades the catalytic synthesis of acrylates from the cheap and abundantly available C₁ building block carbon dioxide and alkenes has been an unsolved problem in catalysis research, both in academia and industry. Herein, we describe a homogeneous catalyst based on nickel that permits the catalytic synthesis of the industrially highly relevant acrylate sodium acrylate from CO₂, ethylene, and a base, as demonstrated, at this stage, by a turnover number of greater than 10 with respect to the metal.     

A clothes‐peg‐shaped binuclear trans‐bis(2‐aminotroponato)palladium(II) complex bearing pentamethylene spacers

rac‐Bis{μ‐trans‐2,2′‐[pentane‐1,5‐diylbis(azanediyl)]ditroponato}dipalladium(II), [Pd₂(C₁₉H₂₀N₂O₂)₂], has been synthesized and fully characterized using single‐crystal X‐ray diffraction, ¹H NMR, FT–IR and mass spectroscopy. The trans coordination, vaulted structure and anti conformation have been unequivocally established from the X‐ray diffraction studies. This is the first example of a bis(aminotroponato)palladium complex. In the crystalline state, the molecule has twofold symmetry and each molecular unit undergoes intermolecular offset π‐stacking of the tropone rings to afford heterochiral interpenetrating dimers that are aligned in a lamellar manner with a herringbone packing motif.     

Time Courses and Time‐Resolved Spectra of Firefly Bioluminescence Initiated by Two Methods of ATP Injection and Photolysis of Caged ATP

The time‐dependent characteristics of firefly bioluminescence initiated by manual injection of adenosine triphosphate (ATP) into buffer solution containing luciferin (Ln), luciferase (Luc) and Mg²⁺ were measured with a resolution of 10 ms, and compared with those obtained by photolysis of caged ATP. The time course depends on pH; both rise and decay rates decrease when pH is lowered from 7.8 to 6.8. In contrast, the parameter λ in the kinetic formula related to diffusion of ATP is almost independent of pH. The pH dependence of the time course of bioluminescence can be explained by the same pH tendency as the rate of ATP binding at the active site of Luc. The time‐resolved spectra can be decomposed into two Gaussian components with maxima at 2.2 and 2.0 eV. At pH 7.8, the band at 2.2 eV is more intense than that at 2.0 eV for all three concentration conditions. At lower pH, the band at 2.2 eV becomes weaker than that at 2.0 eV. The intensity ratio of the 2.0 and 2.2 eV bands is constant for duration time of 600 s for both injection and photolysis experiments, and the above conclusions are unaffected by the concentration ratio [Ln]/[Luc].