Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

Synthesis and radical polymerization of acrylate and methacrylate bearing an isocyanurate core with adamantyl bisurethane moieties

In this article, we report the synthesis of acrylate and methacrylate bearing an isocyanurate core with two adamantyl urethane moieties and their radical homo- and copolymerization with n-butyl methacrylate (BMA). The synthesized polyacrylate exhibits higher 5% weight loss and glass transition temperatures (T_d5 and T_g) than those of the comparative polyacrylate, synthesized from the isocyanurate-based acrylate with two hexyl urethane moieties, suggesting that the rigid adamantane core incorporated in the side chains of polymer largely contributes to increase in thermal stability of polymer. Similarly, the obtained copolymers show higher T_g values than that of homopolymer derived from BMA, leading to the synthesized monomers are useful as a comonomer to enhance thermal property of polymer.     

An enantioselective synthesis of the C1C9 segment of antitumor macrolide peloruside A

A stereocontrolled synthesis of the C₁C₉ segment of the marine natural product peloruside A is described. The key steps involve Sharpless's catalytic asymmetric dihydroxylation reaction, a chelation-controlled reduction of chiral β-alkoxy ketones to elaborate the syn-1,3-diol functionality and a ring-closing olefin metathesis of a homoallylic alcohol-derived acrylate ester to form an α,β-unsaturated δ-lactone.     

Direct transesterification of poly(methyl acrylate) for functional polyacrylate syntheses

Post‐polymerization modification is an important synthetic method to produce macromolecules with various chemical and physical properties. With this technique, functional groups of polymer molecules within the same structural scaffold can be varied, and thus, accurate research on structure‐property relationships is possible. To add practicality, the direct post‐polymerization of commodity polymers has been pursued, but only limited success has been realized. In this report, a study on various transesterification methods for the synthesis of functional polyacrylates beginning with a poly(methyl acrylate) (PMA), one common acrylate polymer, is presented. The Zn‐based catalytic system, a combination of Zn₄(OCOCF₃)₆O and 4‐dimethylaminopyridine with instant methanol removal, exhibited the highest reactivity among many catalysts and conditions. Assorted alcohols were reacted with PMA to produce the corresponding polyacrylates. This method was successfully extended to post‐polymerization modification of a PMA‐containing block copolymer, PS‐b‐PMA and synthesis of acrylate copolymers with functional group density control. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2554–2560     

rac-BINAP-PdCl2 catalyzed Heck reactions of 3-formylquinolin-2-yl chlorides with methyl acrylate: synthesis of methyl 3-(3-formylquinolin-2-yl) acrylates

rac-BINAP-PdCl₂ catalytic system catalyzed Heck reaction of 3-formylquinolin-2-yl chlorides with methyl acrylate in DMA is described to the synthesis of methyl 3-(3-formyl-quinolin-2-yl)-acrylates, in good to excellent yields. The reaction could be also extended with other activated alkenes to afford Heck products. Fused-benzene ring in heterocyclic and carbocyclic moieties was found to enhance the yields.     

Direct Oxidation of Methane to Methanol Over Cu-Based Catalyst in an AC Dielectric Barrier Discharge

In this paper, the conversion of methane to methanol on CuO/Al₂O₃ and Mo–CuO/Al₂O₃ catalysts in a plasma reactor was tested. A comparison between catalytic and plasma-catalytic systems had been made in tested temperature range of 50–300°C. Experimental results showed that plasma-catalytic system demonstrated a much better methane conversion than catalytic system in tested temperature range and Mo–CuO/Al₂O₃ revealed a higher catalytic activity than CuO/Al₂O₃ for methanol synthesis. Furthermore, an Arrhenius plot was made in order to deduce the mechanism of plasma activation, which revealed that the presence of plasma decreased the activation energy for both catalysts. In the case of Mo-CuO/Al₂O₃ catalyst, the enhanced activity for methanol synthesis was assumed due to the oxygen vacancies on Mo–CuO/Al₂O₃ catalyst, which can utilize plasma-induced species to improve the catalytic efficiency.     

Catalytic Formation of Acrylate from Carbon Dioxide and Ethene

With regard to sustainability, carbon dioxide (CO₂) is an attractive C1 building block. However, due to thermodynamic restrictions, reactions incorporating CO₂ are relatively limited so far. One of the so‐called “dream reactions” in this field is the catalytic oxidative coupling of CO₂ and ethene and subsequent β‐H elimination to form acrylic acid. This reaction has been studied intensely for decades. However up to this date no suitable catalytic process has been established. Here we show that the catalytic conversion of ethene and CO₂ to acrylate is possible in the presence of a homogeneous nickel catalyst in combination with a “hard” Lewis acid. For the first time, catalytic conversion of CO₂ and ethene to acrylate with turnover numbers (TON) of up to 21 was demonstrated.     

Polymerization of acrylates and bulky methacrylates with the use of zirconocene precursors: Block copolymers with methyl methacrylate

The polymerization behavior of cyclohexyl methacrylate and trimethylsilyloxyethyl methacrylate with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃/ZnEt₂ was examined. Block copolymers of these bulky methacrylates with methyl methacrylate (MMA), having high molecular weights and relatively narrow molecular weight distributions, were prepared. n‐Butyl acrylate and tert‐butyl acrylate were polymerized with various catalytic systems based on zirconocene complexes. These polymerizations seemed to proceed to a nonquantitative yield, producing polymers with high molecular weights and relatively low polydispersities. This behavior indicated the presence of termination reactions in the initiation step, which appeared to be faster than the propagation step. Block copolymers of these acrylates with MMA were synthesized with the catalytic system rac‐Et(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻[Me₂NHPh]⁺/ZnEt₂, starting from the polymerization of MMA. The block copolymers produced were well defined in most cases, as indicated by size exclusion chromatography, NMR, and differential scanning calorimetry measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3337–3348, 2005     

Poly(Alkyl Glycidate Carbonate)s as Degradable Pressure‐Sensitive Adhesives

Insertion of CO₂ into the polyacrylate backbone, forming poly(carbonate) analogues, provides an environmentally friendly and biocompatible alternative. The synthesis of five poly(carbonate) analogues of poly(methyl acrylate), poly(ethyl acrylate), and poly(butyl acrylate) is described. The polymers are prepared using the salen cobalt(III) complex catalyzed copolymerization of CO₂ and a derivatized oxirane. All the carbonate analogues possess higher glass‐transition temperatures (T_g=32 to ?5 °C) than alkyl acrylates (T_g=10 to ?50 °C), however, the carbonate analogues (T_d≈230 °C) undergo thermal decomposition at lower temperatures than their acrylate counterparts (T_d≈380 °C). The poly(alkyl carbonates) exhibit compositional‐dependent adhesivity. The poly(carbonate) analogues degrade into glycerol, alcohol, and CO₂ in a time‐ and pH‐dependent manner with the rate of degradation accelerated at higher pH conditions, in contrast to poly(acrylate)s.     

Ruthenium-Catalyzed Coupling Reactions of CO2 with C2H4 and Hydrosilanes towards Silyl Esters

A series of in situ-prepared catalytic systems incorporating Ru^II precursors and bidentate phosphine ligands has been probed in the reductive carboxylation of ethylene in the presence of triethylsilane as reductant. The catalytic production of propionate and acrylate silyl esters was evidenced by high-throughput screening (HTS) and implemented in batch reactor techniques. The most promising catalyst systems identified were made of Ru(H)(Cl)(CO)(PPh₃)₃ and 1,4-bis(dicyclohexylphosphino)butane (DCPB) or 1,1’-ferrocene-diyl-bis(cyclohexylphosphine) (DCPF). A marked influence of water on the acrylate/propionate selectivity was noted. Turnover numbers [mol mol(Ru)⁻¹] up to 16 for acrylate and up to 68 for propionate were reached under relatively mild conditions (20 bar, 100 °C, 0.5 mol % Ru, 40 mol % H₂O vs. HSiEt₃). Possible mechanisms are discussed.     

Heck Reaction of Iodoarenes with Methyl Acrylate Catalyzed by Cyciopalladated Complexes of Tertiary Arylamines Immobilized in Ionic Liquid[ Bmim ] ^＋ BF4^-

Heck reaction of iodoarenes with methyl acrylate, catalyzed by cyclolmlladated complexes of tertiary arylamines, was investi-gated in ionic liquid 1-butyl-3-metylimidazolium tetratluorobo-rate ([Bmim] BF4^- ). The products can be isolated convenient-ly from the ionic liquid-catalyst system. The catalysts could be reused for more than 10 times still with satisfactory catalytic ac-tivity.     

Dual chiral silver catalyst in the synthetic approach to the core of hepatitis C virus inhibitor GSK 625433 using enantioselective 1,3-dipolar cycloaddition of azomethine ylides and electrophilic alkenes

The asymmetric 1,3-dipolar cycloaddition of an imino ester 5 with tert-butyl acrylate is catalyzed by a dual chiral silver(I) complex formed from a chiral phosphoramidite 14 and the chiral silver(I) binolphosphate (R)-17. This reaction is selected to achieve the synthesis of enantiomerically enriched key structures to access the third generation of GSK HCV inhibitors. The scope of this dual chiral catalytic system is analyzed by employing different imino esters and dipolarophiles, and also compared with the same cycloaddition reactions performed with the chiral phosphoramidite 14·AgClO₄ complex.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

Specific features of nickel-catalyzed synthesis of poly(butyl (meth)acrylates)

The activity of the catalytic system NiBr₂(PPh₃)₂/Zn/PhI in polymerization of butyl acrylate and butyl methacrylate and in copolymerization of butyl methacrylate with styrene was examined.     

Rhodium-Catalyzed Acrylate Synthesis from Carbon Dioxide and Ethylene by using a Guanidine-Based Pincer Ligand: Perturbing Occupied d-Orbitals by pπ-dπ Repulsion Makes a Difference

Rhodium-catalyzed acrylate synthesis from CO₂ and ethylene was accomplished by using a guanidine-based NCN pincer ligand. The repulsion between pπ-electron of guanidine sidearms and occupied dπ orbital of rhodium center raised the level of d-electrons close to those of formerly known d⁸-ruthenium catalyst, thereby promoting the metallalactone formation from carbon dioxide and ethylene. This work fills the absence of group-9 metal based catalyst for the acrylate synthesis and provides a designing approach for pincer-ligated d⁸-metal catalysts to utilize pπ-dπ interaction for promoting desirable redox processes.     

1D Azido bridged Cu(II) coordination polymer with 1,3-oxazolidine ligand as an effective catalyst for green click synthesis of 1,2,3-triazoles

A new 1D azido bridged Cu(II) coordination polymer with 1,3-oxazolidine based ligand, [Cu(H₃L)(μ_1,3-N₃)(N₃)]_n ( 1 ), was synthesized and characterized by elemental analysis and spectroscopic methods. The structure of 1 was also determined by single crystal X-ray analysis which indicated the 1D polymeric chain is generated by end-to-end (EE) azide bridge. The obtained compound was employed as catalyst in green click synthesis of β-hydroxy-1,2,3-triazoles from one-pot three-component cycloaddition reaction of epoxide-azide-alkyne. The catalytic reactions were carried out in water as a safe, cheap and green solvent. The catalytic studies indicated that the obtained 1D azido bridged Cu(II) coordination polymer is an active catalyst for preparing β-hydroxy-1,2,3-triazoles. The effect of temperature on the selectivity of the catalytic system was studied and the results indicated this catalytic system has high selectivity at low temperatures. The structure the product obtained from the reaction of 2,3-epoxypropylphenylether, azide and 1-ethynyl-1-cyclohexanol ( T4 ) was determined by single crystal X-ray analysis. The results indicate Cu(II) coordination polymers can be a new class of catalytic systems for green click synthesis of 1,2,3-triazoles.     

Chain Walking Ethylene Copolymerization with an ATRP Inimer for One‐Pot Synthesis of Hyperbranched Polyethylenes Tethered with ATRP Initiating Sites

A one‐pot procedure for the synthesis of hyperbranched polyethylenes tethered with ATRP initiating sites by chain walking ethylene copolymerization with an acrylate‐type ATRP inimer, 2‐(2‐bromoisobutyryloxy) ethyl acrylate (BIEA) is reported. Because of its ability to incorporate acrylate‐type comonomers and tolerance toward the α‐bromoester group, the chain walking Pd‐diimine catalyst, [(ArNC(Me) (Me)CNAr)Pd(CH₃)(NCMe)]SbF₆ (Ar = 2,6‐(iPr)₂C₆H₃), allowed the successful synthesis of a series of hyperbranched copolymers tethered with 2‐bromoisobutyryl groups at different densities. These copolymers may serve as polyfunctional macroinitiators for the ATRP of functional monomers to further synthesize core‐shell structured functionalized copolymers with a hyperbranched polyethylene core grafted with side chains of the functional monomers.

     

Manganese oxide nanoparticles supported on graphene oxide as an efficient nanocatalyst for the synthesis of 1,2,4-oxadiazoles from aldehydes

The easy synthesis of graphene oxide (GO)-supported manganese dioxide (MnO₂) nanoparticles as a stable heterogeneous nanocatalyst (MnO₂@GO) is described. This catalyst was investigated in the synthesis of 1,2,4-oxadiazoles from amidoximes and aldehydes via a cyclization and oxidation process. The nanocomposite was prepared and characterized using various techniques. The catalytic application of the nanocomposite was examined in the reaction of a variety of aldehydes with aliphatic and aromatic amidoximes. The stable and robust catalyst was recycled for seven consecutive runs without a significant decrease in the catalytic activity.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

New synthesis of 2-benzimidazoleacetates and study of their Knoevenagel reaction

To obtain 2-benzimidazolyl acrylate 2, a new efficient synthesis of 2-benzimidazoleacetate, involving esterification of 2-benzimidazole acetic acid at low temperature as the crucial step, was developed. The generality and efficiency of the process was illustrated by the high-yield synthesis of methyl, ethyl, i-propyl, and n-butyl 2-benzimidazoleacetate. The Knoevenagel reaction of 2-benzimidazoleacetate with aromatic aldehydes was studied. It was found that only in the presence of a catalytic amount of morpholine could the Knoevenagel reaction proceed to give the expected 3-aryl-2-benzimidazolyl acrylate. A mechanism for the morpholine-catalyzed reaction is suggested.