Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

A boundary element method for the calculation of noise barrier insertion loss in the presence of atmospheric turbulence

Atmospheric turbulence is an important factor that limits the amount of attenuation a barrier can provide in the outdoor environment. It is therefore important to develop a reliable method to predict its effect on barrier performance. The boundary element method (BEM) has been shown to be a very effective technique for predicting barrier insertion loss in the absence of turbulence. This paper develops a simple and efficient modification of the BEM formulation to predict the insertion loss of a barrier in the presence of atmospheric turbulence. The modification is based on two alternative methods: (1) random realisations of log-amplitude and phase fluctuations of boundary sources and (2) de-correlation of source coherence using the mutual coherence function (MCF). An investigation into the behaviours of these two methods is carried out and simplified forms of the methods developed. Some systematic differences between the predictions from the methods are found. When incorporated into the BEM formulation, the method of random realisations and the method of MCF de-correlation provide predictions that agree well with predictions by the parabolic equation method and by the scattering cross-section method on a variety of thin barrier configurations.     

Aspects of the transpiration model for aerofoil design

Transpiration is a technique in which extra non-physical normal flows are created on an aerofoil surface in order to form a new streamline pattern such that the surface streamlines no longer follow the aerofoil surface under inviscid flow. The transpiration model is an important technique adopted in aerofoil design either to avoid mesh regeneration when aerofoil profile co-ordinates are adjusted or to find shape corrections in inverse design methods. A first-order approximation (with respect to the normal streamline displacement) to the transpiration model is commonly adopted; it is shown that this can be a poor approximation especially in regions of high curvature. In this paper more accurate approximations are developed to address this problem and improve the accuracy.     

Multiparametric Evaluation of Dysphonic Severity

SUMMARY: In recent years, the multiparametric approach for evaluating perceptual rating of voice quality has been advocated. This study evaluates the accuracy of predicting perceived overall severity of voice quality with a minimal set of aerodynamic, voice range profile (phonetogram), and acoustic perturbation measures. One hundred and twelve dysphonic persons (93 women and 19 men) with laryngeal pathologies and 41 normal controls (35 women and six men) with normal voices participated in this study. Perceptual severity judgement was carried out by four listeners rating the G (overall grade) parameter of the GRBAS scale. The minimal set of instrumental measures was selected based on the ability of the measure to discriminate between dysphonic and normal voices, and to attain at least a moderate correlation with perceived overall severity. Results indicated that perceived overall severity was best described by maximum phonation time of sustained /a/, peak intraoral pressure of the consonant-vowel /pi/ strings production, voice range profile area, and acoustic jitter. Direct-entry discriminant function analysis revealed that these four voice measures in combination correctly predicted 67.3% of perceived overall severity levels.     

Detection of Anti-Ulcer Drugs and Their Metabolites in Horse Urine by Liquid Chromatography – Mass Spectrometry

This paper describes a convenient method for the extraction and detection of eight anti-ulcer drugs simultaneously in horse urine, a relatively complex and viscous matrix, using a single-step liquid-liquid extraction followed by high-performance liquid chromatography – mass spectrometry (LC-MS). Anti-ulcer drugs were isolated from horse urine by salting out and liquid-liquid extraction. Detection of these drugs at concentrations below 1 ng mL^?1 could be achieved using LC-MS-MS in the positive atmospheric pressure chemical ionisation (APCI) mode. The above analysis was also extended to elimination studies of horses administered with ranitidine and omeprazole. The urinary elimination data of these two drugs suggest that ranitidine was eliminated from horse urine at a much slower rate than omeprazole. In addition, three ranitidine metabolites and six omeprazole metabolites were identified for the first time in equine urine samples.     

Direct aziridination of alkenes by a cationic (salen)ruthenium(VI) nitrido complex

[RuVI(N)(salchda)(CH3OH)]PF6 (1) (salchda = N,N'-bis(salicylidene)o-cyclohexyldiamine dianion) reacts readily with 2,3-dimethyl-2-butene at room temperature in the presence of pyridine or 1-methylimidazole to give initially [RuIV(Az1(-H))(salchda)(py)]PF6 (2, Az1 = 2,2,3,3-tetramethylaziridine), which is then slowly reduced to [RuIII(Az1)(salchda)(py)]PF6 (3). 1 also reacts with a variety of aryl-substituted alkenes such as styrene and trans-beta-methylstyrene in the presence of py or 1-MeIm to give the corresponding ruthenium(III) aziridine complexes. The structures of 3 and [RuIII(Az2)(salchda)(1-MeIm)]PF6 (4, Az2 = trans-2-methyl-3-phenylaziridine) have been determined by X-ray crystallography. The Ru-N(aziridine) distances (2.1049, 2.097 A) are consistent with a neutral aziridine ligand. The C-C and C-N distances in the aziridine ligands are all indicative of single bonds.     

Generation and Reactivity of a One-Electron-Oxidized Manganese(V) Imido Complex with a Tetraamido Macrocyclic Ligand

The synthesis and X-ray structure of a new manganese(V) mesitylimido complex with a tetraamido macrocyclic ligand (TAML), [Mn^V(TAML)(N-Mes)]⁻ ( 1 ), are reported. Compound 1 is oxidized by [(p-BrC₆H₄)₃N ]^+.[SbCl₆]⁻ and the resulting Mn^VI species readily undergoes H-atom transfer and nitrene transfer reactions.     

Air‐Stable Spirofluorene‐Containing Ladder‐Type Bis(alkynyl)borane Compounds with Readily Tunable Full Color Emission Properties

A series of air‐stable spiro‐fused ladder‐type boron(III) compounds has been designed, synthesized, and the electrochemistry and photophysical behavior have been characterized. By simply varying the substituents on the pyridine ring and extending the π‐conjugation of the spiro framework, the emission color of these compounds can be easily fine‐tuned spanning the visible spectrum from blue to red. All compounds exhibit a broad and structureless emission band across the entire visible region, assigned as an intramolecular charge‐transfer transition originating from the thiophene of the spiro framework to the pyridine‐borane moieties. In addition, these compounds demonstrate high photoluminescence quantum yields of up to 0.81 in dichloromethane solution and 0.86 in doped thin films. Some of the compounds have also been employed as emissive materials, in which solution‐processed organic light‐emitting devices (OLEDs) with tunable emission colors spanning the visible spectrum from blue, green to red have been realized, demonstrating the potential applications of these boron compounds in OLEDs.     

Group Theory,Computational Thinking,and Young Mathematicians

In this article, we investigate the artistic puzzle of designing mathematics experiences (MEs) to engage young children with ideas of group theory, using a combination of hands-on and computational thinking (CT) tools. We elaborate on: (1) group theory and why we chose it as a context for young mathematicians’ experiences with symmetry and transformations; (2) our ME design principles of agency, access, surprise and audience; (3) the affordances of CT that complement our design principles; and (4) three ME variations we tested in grades 3–6 classrooms. We then reflect on the ME variations based on our design principles and the affordances of CT, and consider how the MEs may be further adapted and improved.