A rapid and sensitive UPLC‐MS/MS method for quantification of two caffeoylquinic acids and four main active components in rat plasma after an intravenous administration of Qingkailing injection and its application to a pharmacokinetic study

Qingkailing (QKL) injection, a modified modern Chinese medicine preparation, is widely used in the clinic for its significant antipyretic and anti‐inflammatory effects, but its serious adverse drug reactions have attracted more and more attention. Series of caffeoylquinic acids in QKL are widely suspected to be the allergens responsible for these adverse drug reactions. Therefore, pharmacokinetic studies of the caffeoylquinic acids are needed. In this paper, a simple, rapid and sensitive ultra‐performance liquid chromatography–tandem mass spectrometry method was developed for the simultaneous determination of chlorogenic acid, neochlorogenic acid, baicalin, geniposide, cholic acid and hyodeoxycholic acid in rat plasma. Chromatographic separation was achieved on a BEH C₁₈ column by a gradient elution at a flow rate of 0.40 mL/min in only 6.0 min. All analytes were monitored by multiple reaction monitoring mode with negative electrospray ionization. The calibration curves of these analytes were all linear (r > 0.9978) over wide concentration ranges. The intra‐ and inter‐ day precisions (relative standard deviations) were within 14.3% and accuracy (relative error) ranged from ?6.8 to 4.8%. The mean recoveries ranged from 74.5 to 105.6%. This validated method was successfully applied to the pharmacokinetic study of the six analytes in rats following an intravenous administration of QKL injection. Copyright © 2013 John Wiley & Sons, Ltd.     

Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

The need for more efficient power cycles has attracted interest in super-critical CO₂ (sCO₂) cycles. However, the effects of high CO₂ dilution on auto-ignition at extremely high pressures has not been studied in depth. As part of the effort to understand oxy-fuel combustion with massive CO₂ dilution, we have measured shock tube ignition delay times (IDT) for methane/O₂/CO₂ mixtures and hydrogen/O₂/CO₂ mixtures using sidewall pressure and OH* emission near 306?nm. Ignition delay time was measured in two different facilities behind reflected shock waves over a range of temperatures, 1045–1578?K, in different pressures and mixture regimes, i.e., CH₄/O₂/CO₂ mixtures at 27–286 atm and H₂/O₂/CO₂ mixtures at 37–311 atm. The measured data were compared with the predictions of two recent kinetics models. Fair agreement was found between model and experiment over most of the operating conditions studied. For those conditions where kinetic models fail, the current ignition delay time measurements provide useful target data for development and validation of the mechanisms.     

液液萃取-场放大进样-毛细管电泳非接触式电导分离检测酱油中的安赛蜜

采用场放大进样（FASI）-毛细管电泳非接触式电导检测法（CE-C⁴D）,结合液液萃取（LLE）的样品净化预处理技术,分离检测了酱油中人工合成甜味剂安赛蜜。酱油样品经酸化后,用乙酸乙酯作为萃取剂,成功地消除了酱油中含有的大量无机盐等复杂基体对微量安赛蜜的干扰。实验对影响LLE萃取效率和FASI-CE-C⁴D分离检测的关键因素进行了讨论,特别是对样品净化前处理过程中萃取剂及用量、样品酸化pH值、萃取时间、萃取温度等条件进行了优化。结果表明,酱油中的安赛蜜可获得良好分离和灵敏检测,检出限和定量限分别为0.15 mg/kg和0.48 mg/kg。对市售酱油样品进行安赛蜜的加标回收测定,得到加标回收率为92.3%~108.1%,相对标准偏差＜8.0%。该法具有简单快速、灵敏高效、分析成本低的优点,能满足酱油中安赛蜜的分析检测要求。     

Measurement of time histories of stable intermediates during first stage ignition of n-heptane and its two isomers in a shock tube

We report the first shock tube measurements of formaldehyde (CH₂O) during the first stage ignition of n-heptane, 2-methylhexane and 3,3-dimethylpentane, in highly diluted fuel/oxygen mixtures in the pressure range of 7–10 atm and temperature range of 700–880 K. Combined time histories of all carbonyl (–C = O) species, CO and fuel were also measured simultaneously in an effort to study the impact of fuel structure on the concentration and the rate of evolution of first stage ignition products. Of the three isomers studied in this work, n-heptane was found to be the fastest, while 3,3-dimethylpentane was found to be the slowest. The differences in the time scale of formation, and plateau concentration of the intermediates between the isomers across the entire range of test conditions suggests a strong dependency of the measured time histories to fuel structure. These species therefore act as markers of the Negative Temperature Coefficient (NTC) behavior of fuels and can be used as targets for developing semi-empirical, hybrid chemistry models of complex, multi-component petroleum derived gasoline and jet fuels. The time histories reported in this work should prove very useful in the refinement of detailed kinetic models of n-heptane, and development of rate rules for branched alkane isomers.     

软弱地层深挖基坑中工程桩偏位分析

某软土地基上建造多栋毗邻的小高层住宅,在地下车库基坑的开挖过程中,软土流动推挤坑内桩基导致偏位。文章以上述工程为背景,借助三维有限差分程序FLAC3D,选取简化计算模型,对基坑开挖流动土体作用下工程桩的反应性状进行了模拟与分析,并与实测值进行了比较,最后讨论了影响桩基变形的相关因素,可为分析软土地区基坑开挖对坑内工程桩影响时提供一定的理论指导。     

岩盐用作路基填料的力学性质试验

通过试验,研究了察尔汗岩盐用作路基填料的压实特性、抗压强度以及循环荷载下的变形性状。主要探讨了岩盐试样中细粒含量比例对试样压实特性的影响规律;天然岩盐抗压强度的大小分布,以及岩盐抗压强度与粒径、干密度、含水量的关系;交通循环荷载作用下,岩盐的动应变发展情况等。这些结论对盐湖公路建设具有一定的指导意义。     

Microfluidic chip-based cell electrophoresis with multipoint laser-induced fluorescence detection system

In this work, the electrophoretic mobility (EPM) measurement of individual cells was investigated by a simple on-chip electrophoresis system with LIF multipoint detection. The system enabled the characterization of cell electrophoresis behavior as well as the fluorescence signal from individual cells simultaneously. The measurement yielded the electropherograms of a large number of cells labeled with dye, in which the migration time and migration distance could be obtained easily. The EPM has been demonstrated to be different between the K562 cells and K562 cells treated with anticancer drug arsenic trioxide (As2O3). The K562 cells were found to exhibit a lower EPM compared to the cells after drug addition with different concentration. In this preliminary study, over 300 cells could be analyzed within 2 h, demonstrated a much higher analysis throughput compared with traditional methods. The established system is simple and fast, which is expected to be a promising method for evaluating cell surface properties and to be useful in clinical and pharmaceutical applications.     

Study on intercalation and exfoliation behavior of organoclays in epoxy resin

Intercalation and exfoliation behavior of organoclays in epoxy resin has been studied through XRD and DSC. It was found that the organoclays were easily intercalated by epoxy oligomer to form a stable epoxy/clay intercalated hybrid. Under appropriate conditions the clays were able to be further exfoliated as the epoxy resin was cured; thus, a nanocomposite was obtained. It was also found that the exfoliating ability of the organoclays was basically determined by the nature of the clays and the curing agent used. The exfoliation mechanism is discussed in this paper. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 115–120, 2001     

Speciation of selenomethionine and selenocystine using online micro-column containing Cu(II) loaded nanometer-sized Al2O3 coupled with ICP-MS detection

A flow injection online speciation procedure by using micro-column packed with Cu(II) loaded nanometer-sized Al₂O₃ coupled to inductively coupled plasma mass spectrometry (ICP-MS) for the separation and determination of selenomethionine (SeMet) and selenocystine (SeCys₂) has been developed. The main factors affecting the separation and preconcentration of SeMet and SeCys₂ including pH value, sample flow rate, eluent concentration, eluent volume and flow rate, and interfering ions have been investigated. It was found that SeCys₂ could be selectively retained by micro-column packed with Cu(II) loaded nanometer-sized Al₂O₃ at pH 4.0, and the retained SeCys₂ could be eluted by 1.0 mol L⁻¹ HNO₃, while SeMet was not retained and passed through the micro-column directly at this pH. Both SeMet and SeCys₂ could be quantitatively adsorbed by the micro-column at pH 9.0, and the retained SeMet and SeCys₂ could be easily eluted with 1.0 mol L⁻¹ HNO₃. The content of SeMet was obtained by subtracting the SeCys₂ from the total content of seleno amino acids. With the enrichment factor of 7.8 and 7.7, the limits of detection (LODs) for SeMet and SeCys₂ were found to be 24 pg Se mL⁻¹ and 21 pg Se mL⁻¹, respectively. The relative standard deviations (RSDs) for SeCys₂ and SeMet with seven replicate determinations of 1.0 ng mL⁻¹ SeMet and SeCys₂, were 2.1% and 1.6%, respectively, the sampling frequency of 8 h⁻¹ was obtained. The proposed method was applied to the speciation of SeMet and SeCys₂ in selenized yeast, human urine and serum with satisfactory results.     

Hollow Gaussian beam generated by beam shaping with phase-only liquid crystal spatial light modulator

Based on the refractive beam shaping system, the transformation of a quasi-Gaussian beam into a dark hollow Gaussian beam by a phase-only liquid crystal spatial light modulator (LC-SLM) is proposed. According to the energy conservation and constant optical path principle, the phase distribution of the aspheric lens and the phase-only LC-SLM can modulate the wave-front properly to generate the hollow beam. The numerical simulation results indicate that, the dark hollow intensity distribution of the output shaped beam can be maintained well for a certain propagation distance during which the dark region will not decrease whereas the ideal hollow Gaussian beam will do. By designing the phase modulation profile, which loaded into the LC-SLM carefully, the experimental results indicate that the dark hollow intensity distribution of the output shaped beam can be maintained well even at a distance much more than 550 mm from the LC-SLM, which agree with the numerical simulation results.