Catalytic Nitrene Transfer by an FeIV-Imido Complex Generated by a Comproportionation Process

Nitrene transfer reactions have emerged as one of the most powerful and versatile ways to insert an amine function to various kinds of hydrocarbon substrates. However, the mechanisms of nitrene generation have not been studied in depth albeit their formation is taken for granted in most cases without definitive evidence of their occurrence. In the present work, we compare the generation of tosylimido iron species and NTs transfer from Fe^II and Fe^III precursors where the metal is embedded in a tetracarbene macrocycle. Catalytic nitrene transfer to reference substrates (thioanisole, styrene, ethylbenzene and cyclohexane) revealed that the same active species was at play, irrespective of the ferrous versus ferric nature of the precursor. Through combination of spectroscopic (UV-visible, Mössbauer), ESI-MS and DFT studies, an Fe^IV tosylimido species was identified as the catalytically active species and was characterized spectroscopically and computationally. Whereas its formation from the Fe^II precursor was expected by a two-electron oxidative addition, its formation from an Fe^III precursor was unprecedented. Thanks to a combination of spectroscopic (UV-visible, EPR, Hyscore and Mössbauer), ESI-MS and DFT studies, we found that, when starting from the Fe^III precursor, an Fe^III tosyliodinane adduct was formed and decomposed into an Fe^V tosylimido species which generated the catalytically active Fe^IV tosylimide through a comproportionation process with the Fe^III precursor.     

Castelnuovo-Mumford regularity by approximation

The Castelnuovo-Mumford regularity of a module gives a rough measure of its complexity. We bound the regularity of a module given a system of approximating modules whose regularities are known. Such approximations can arise naturally for modules constructed by inductive combinatorial means. We apply these methods to bound the regularity of ideals constructed as combinations of linear ideals and the module of derivations of a hyperplane arrangement as well as to give degree bounds for invariants of finite groups.     

An anisotropic fibre-network model for mechano-sorptive creep in paper

In this paper a simplified network model for mechano-sorptive creep is presented, which is a further development of an earlier paper [Strömbro, J., Gudmundson, P., 2008. Mechano-sorptive creep under compressive loading – a micromechanical model. International Journal of Solids and Structures 45 (9), 2420–2450.]. It is assumed that the anisotropic hygroexpansion of the fibres leads to large stresses at the fibre bonds when the moisture content changes. The resulting stress state will accelerate creep if the fibre material obeys a constitutive law that is non-linear. Fibre kinks are included in order to capture experimental observations of larger mechano-sorptive effects in compression than in tension. Moisture dependent material parameters and anisotropy in the fibre distribution have been introduced. Theoretical predictions based on the model are compared to experimental results for an anisotropic paper both under tensile and compressive loading at varying moisture content and it is found that the important features in the experiments are captured by the model. Different kinds of drying conditions have also been examined.     

Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.     

Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

Cover Picture

The cover picture shows in the background the whole cell of a methanotrophic bacterium on which are superimposed components of methane monooxygenase (the structure of the hydroxylase component (top), one of the two four-helix bundles that house the catalytic diiron centers (left)) and a schematic diagram of the catalytic cycle by which the enzyme converts dioxygen and methane into methanol and water. More about this unusual enzyme system is reported by Lippard et al. on p. 2782 ff.     

A 13C- and 195Pt-NMR. Study of the Complexes trans-PtCl2 (amine) (CH2CH2)

¹³C- and ¹⁹⁵Pt-NMR. spectra for the complexes trans-PtCl₂(amine)(CH₂?CH₂) have been measured. For amine = (S)-N-methyl-α-methylbenzylamine the two diastereomers present may be distinguished from the values ³J(Pt,C). The ¹⁹⁵Pt-chemical shift is shown to be sensitive to subtle differences stemming from intramolecular non-bonded interactions.     

Does ionized diacetylene have a positive proton affinity?

Singly and doubly charged C₄H₃^+/2+ ions generated upon electron ionization (EI) of the neutral precursors 1,3-butadiene, benzene, and exo-methylene cyclopropane, respectively, are examined by sector-field mass-spectrometry. Charge stripping of the mass-selected monocations affords the corresponding dications and charge exchange of the C₄H₃²⁺ dications allows for the reverse redox process. Refined analysis and additional MS/MS studies suggest that the monocations are mixtures of isomeric ions formed upon ionization, whereas only a single type of dication seems to be formed. As an average of energy-resolved measurements, a vertical ionization energy of IE_v(C₄H₃⁺)=16.5±0.4 eV is derived. In addition to the experimental work, density functional theory is used for a computational exploration of the mono- and dicationic species. The best theoretical estimates are IE_a(C₄H₃⁺)=16.33 eV and IE_v(C₄H₃⁺)=16.49 eV for the most stable isomer H₂C=C---CCH⁺. Combination of the experimental and theoretical findings leads to the conclusion that the diacetylene cation C₄H₂⁺ has indeed a positive proton affinity of PA(C₄H₂⁺)=1.50±0.42 eV.     

Poly(ε-caprolactone) macroligands with β-diketonate binding sites: synthesis and coordination chemistry

Dibenzoylmethane (dbm) initiators with one and two alcohol sites were used to generate dbm end-functionalized and dbm-centered poly(ε-caprolactone) macroligands (dbmPCL and dbmPCL₂) with low polydispersities (∼1.1). Chelation of polymeric ligands to metal ions (Eu³⁺, Fe³⁺, Ni²⁺ and Cu²⁺) produced metal-centered star polymers, which were characterized by UV-vis and fluorescence spectroscopy, as well as gel permeation chromatography.     

A rapid and sensitive method for simultaneous determination of lamivudine and zidovudine in human serum by on-line solid-phase extraction coupled to liquid chromatography/tandem mass spectrometry detection

A method based on solid-phase extraction (SPE) coupled to high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) detection was developed for the simultaneous determination of lamivudine (3TC) and zidovudine (AZT) in human serum, using didanosine (ddI) as internal standard. The acquisition was performed in multiple reaction monitoring (MRM) mode, monitoring the transitions m/z 230.0 --> 111.8 for 3TC, m/z 268.1 --> 126.8 for AZT, and m/z 237.2 --> 136.8 for ddI. The limits of detection and quantitation were 3 and 10 ng/mL for 3TC, and 5 and 15 ng/mL for AZT. The method was linear in the studied ranges (10-1500 ng/mL for 3TC and 15-3000 ng/mL for AZT), with r(2) > 0.99 for each drug, and the run time was 4 min. The intra-assay precisions (%) were in the ranges 1.9-8.7 (3TC) and 2.2-8.9 (AZT), the inter-assay precisions were in the ranges 2.6-9.0 (3TC) and 4.2-8.1 (AZT), and the intra- and inter-assay accuracies were >97% for both drugs. The absolute recoveries were 95-99% for 3TC (45, 600 and 1200 ng/mL) and 104-112% for AZT (45, 1000 and 2400 ng/mL). The analytical method was applied to a bioequivalence study in which 24 healthy adult volunteers received single oral doses of the reference formulation and two test combined AZT/3TC tablets, in an open, three-period, balanced, randomized, crossover protocol. Based on the 90% confidence interval of the individual ratios (test formulation/reference formulation) for C(max) (peak serum concentration) and AUC(0-inf) (extrapolated area under the serum concentration vs. time curve from time zero to infinity), it was concluded that the two test formulations are bioequivalent to the reference formulation with respect to the rate and extent of absorption of both 3TC and AZT.