Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

Crystal and molecular structures of binuclear caesium complexes with 1,3-calix[4]-bis-crown-6 and 1,3-calix[4]-bis-benzo-crown-6

The crystal structures of two binuclear complexes between caesium and 1,3-calix[4]-bis-crowns have been determined. Cs₂ Bis-benzoC6(NO₃)₂. 3CHCl₃ (1) in whichBis-benzoC6 is 1,3-calix[4]-bis-benzo-crown-6, crystallizes in the orthorhombic system: space groupPca2 ₁ a=19.513(10),b=15.382(5),c=23.708(9) Å,V=7116(5) ų,Z=4. Refinement led to a final conventionalR value of 0.065 for 2321 reflections. The structure of (1) is analogous to those already reported withBis-C6, (in whichBis-C6 is, 1,3-calix[4]-bis-crown-6) and NO ₃ ^– as a counter-ion. Cs₂ Bis-C6(NCS)₂ (2) crystallizes in the monoclinic system: space, groupC2 a=36.57(2),b=11.47(1),c=13.65(1) Å, =109.03(5)°.,V=5415(6) ų,Z=4. Refinement led to a final conventionalR value of 0.063 for 2227 reflections. Compound (2) is made of dimers bridged by a disordered NCS^– ion. The crown ether chain conformations are discussed. Supplementary data relating to this article (atomic coordinates, anisotropic displacement parameters, bond distances and angles and observed and calculated structure factors) are deposited with the British Library as Supplementary Publication No. SUP 82199 (52 pages).     

Biocompatible polymers for antibody support on gold surfaces

The elimination or minimization of non-specific protein adsorption from serum is critical for the use of surface plasmon resonance (SPR) sensors for in vitro and in vivo analysis of complex biological solutions. The ultimate goals in this application are to minimize non-specific adsorption of protein and to maximize analyte signal. A reduction of the non-specific protein adsorption from serum of up to 73% compared to carboxymethylated-dextran 500 kDa (CM-dextran) was achieved following a survey of eight biocompatible polymers and 10 molecular weights of CM-dextran. These coatings minimize non-specific adsorption on the sensor while also serving as immobilization matrices for antibody fixation to the probes. Polymers including polysaccharides: CM-dextrans, CM-hyaluronic acid, hyaluronic acid, and alginic acid were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisuldfide–polyethyleneglycol–N-hydroxysuccinimide (OPSS–PEG–NHS), and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA) were also used. The non-specific protein adsorption reduction was measured over a 14 day period at 0 °C for each polymer. Calibration curves using some of these polymers were constructed to show the performance and low detection limit possibilities of these new antibody supports. For many of the polymers, this is the first demonstration of employment as an antibody support for an optical or surface active sensor. CM-dextran is the polymer offering the largest signal for the antigen detection. However, the biocompatible polymers demonstrate a greater stability to non-specific binding in serum. These biocompatible polymers offer different alternatives for CM-dextran.     

Half-sandwich and mixed-ring uranium complexes

The monocyclooctatetraene uranium complex [U(COT)(I)₂(THF)₂] (COT=η-C₈H₈; THF=tetrahydrofuran), isolated from the reaction of bis(cyclooctatetraene)uranium with iodine, is a precursor for the synthesis of the alkyl derivatives [U(COT)(CH₂Ph)₂i (HMPA) ₂], [U(COT)(CH₂SiMe₃)₂(HMPA)] (HMPA=hexamethyl phosphorous triamide) and [U(COT)CH₂SiMe₃)₃] [Li(THF)₃] and of the mixed-ring compounds [U(COT)(η-C₅R₅)(I)] (R=H or Me). The last were used to prepare the amide and alkyl complexes [U(COT)(η-C₅H₅)(N{SiMe₃}₂)] and [U(COT)(η-C₅Me₅)(CH₂SiMe₃)].     

Gas-Phase Lithium Cation Basicity: Revisiting the High Basicity Range by Experiment and Theory

According to high level calculations, the upper part of the previously published FT-ICR lithium cation basicity (LiCB at 373 K) scale appeared to be biased by a systematic downward shift. The purpose of this work was to determine the source of this systematic difference. New experimental LiCB values at 373 K have been measured for 31 ligands by proton-transfer equilibrium techniques, ranging from tetrahydrofuran (137.2 kJ mol^?1) to 1,2-dimethoxyethane (202.7 kJ mol^?1). The relative basicities (ΔLiCB) were included in a single self-consistent ladder anchored to the absolute LiCB value of pyridine (146.7 kJ mol^?1). This new LiCB scale exhibits a good agreement with theoretical values obtained at G2(MP2) level. By means of kinetic modeling, it was also shown that equilibrium measurements can be performed in spite of the formation of Li⁺ bound dimers. The key feature for achieving accurate equilibrium measurements is the ion trapping time. The potential causes of discrepancies between the new data and previous experimental measurements were analyzed. It was concluded that the disagreement essentially finds its origin in the estimation of temperature and the calibration of Cook’s kinetic method. Graphical Abstract

?     

2-Groupe des classes positives d'un corps de nombres et noyau sauvage de la K-théorie

We compute the 2-rank of the wild kernel WK₂(F) of a number field by constructing a 2-class group ad hoc. The main result generalizes in the more intricate case the canonical isomorphism established for odd primes under the assumption in a previous article (cf. (Acta. Arith. 67 (1994) 335; Math. Z. 238 (2001) 335)). It involves a criterium of triviality for the 2-part of the wild kernel of Galois number fields and, in the particular case of quadratic fields, it leads to a logarithmic interpretation of the diophantine conditions obtained by other authors.     

Concentration of sodium ion as the determining factor for the association of dansyl amino acids with the teicoplanin molecule in reversed-phase liquid chromatography

The mechanism of the binding of D,L dansyl amino acids to teicoplanin was investigated. Na+ was used as an indicator of the interactions between the solutes and teicoplanin. The number (n) of sodium ions, Na+, excluded from the solute-teicoplanin interface when analyte transfer occurred was determined. A thermodynamic study and enthalpy-entropy compensation were performed to further explore the interaction mechanism. From these results, it was shown that teicoplanin was balanced between 2 conformational states characterized by distinct enantioselective properties. This approach indicates that liquid chromatography (LC) is a useful tool to extract physicochemical and molecular information from retention data. Thus, LC can be used as a complementary technique with the conventional techniques of molecular interaction analysis.     

Extraction of Strontium and Cesium by Dicarbollides, Crown Ethers and Functionalized Calixarenes

The two main classes of extractantsused for the extraction of cesium and strontium aredicarbollides and crown ethers. Dicarbollides wereused on a large scale for the extraction of these twoelements from high-activity waste. The basicdicarbollides present drawbacks since they need to bediluted in polar solvent such as nitrobenzene and theirefficiency strongly decreases as the acidity of liquidwaste increases. Crown ethers enable cesium andstrontium to be extracted if the concentration ofsodium or the acidity of solutions are not too high.Recently, calixarenes blocked in the 1,3-alternateconformation were used for the selective extractionof cesium, even from high-salt waste matrices.