The effect of carbon dioxide on xylose fermentation byPichia stipitis

Carbon dioxide was found to reduce the xylose fermentation rate of two different strains ofPichia stipitis (CBS 5773 and CBS 5776) significantly in anaerobic batch fermentations. The maximum specific fermentation rate in a carbon dioxide atmosphere was about 45% lower than the fermentation rate in nitrogen atmosphere. Further-more, the fermentation rate was found to be correlated to the growth rate. It is probable that the carbon dioxide influences the fermentation rate partly through decreasing the growth rate. It was also found that the fermentation rate of CBS 5773 was higher than for CBS 5776 and that the specific fermentation rate was lower at a higher cell density.     

Simultaneous determination of albumin and immunoglobulin G with fluorescence spectroscopy and multivariate calibration

A method is proposed for the simultaneous determination of albumin and immunoglobulin G (IgG1) with fluorescence spectroscopy and multivariate calibration with partial least squares regression (PLS). The influence of some instrumental parameters were investigated with two experimental designs comprising 19 and 11 experiments, respectively. The investigated parameters were excitation and emission slit, detection voltage and scan rate. When a suitable instrumental setting had been found, a minor calibration and test set were analysed and evaluated. Thereafter, a larger calibration of albumin and IgG1 was made out of 26 samples (0-42 μg ml⁻¹ albumin and 0-12.7 μg ml⁻¹ IgG1). This calibration was validated with a test set consisting of 14 samples in the same concentration range. The precision of the method was estimated by analysing two test set samples for six times each. The scan modes tested were emission scan and synchronous scan Δ60 nm. The results showed that the method could be used for determination of albumin and IgG1 (albumin, root mean square error of prediction (RMSEP) <2, relative standard error of prediction (RSEP) <6% and IgG1, RMSEP <1, RSEP <8%) in spite of the overlapping fluorescence of the two compounds. The estimated precision was relative standard deviation (R.S.D.) <1.7%. The method was finally applied for the analysis of some sample fractions from an albumin standard used in affinity chromatography.     

Narrowband bulk Bragg grating optical parametric oscillator

A narrowband, pulsed optical parametric oscillator (OPO) whose output coupler is a bulk glass Bragg grating is demonstrated. The OPO is based on periodically poled KTiOPO4 and is pumped by a pulsed, frequency-doubled Nd:YAG laser at 532 nm, generating a signal at 975 nm with a total efficiency of 35%. This novel and compact device shows a spectral bandwidth of 0.16 nm (50 GHz), a decrease by a factor of 20 compared with that when a conventional mirror is used. By using a folded cavity, we demonstrate tunable radiation with a tuning range of 60 nm and maintained spectral bandwidth.     

A Raman study of polymerised C60

60 are reported. Although prepared according to different routes the Raman spectra of the two polymeric phases of C₆₀ show a quantitative agreement with respect to mode positions and intensity. We conclude from this that both materials have the same structure at least in the short range order, i.e. the same type of bonding and co-ordination between neighbouring C₆₀ molecules. An investigation of the time dependence of the thermal decomposition of high pressure polymerised C₆₀ is also presented. The rate of decomposition of the polymeric phase is found to be multi-exponential at all temperatures investigated. From an Arrhenius-type analysis of the short time data and the long time data, respectively, the activation energy for thermal dissociation of polymeric bonds was found to increase with time. Received: 20 September 1996/Accepted: 11 November 1996     

Sonic spray ionization interface for liquid chromatography-mass spectrometry

A sonic spray ionization (SSI) interface for liquid chromatography-mass spectrometry (LC-MS) analysis was optimized for analysis of 2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-methyl-phenol (tolterodine), used as a model drug substance, and the influence of different parameter settings was evaluated using factorial design. A comparison between SSI and electrospray ionization (ESI) was made for tolterodine, tolterodine metabolites, and a set of steroids.SSI was found to give slightly poorer repeatability and broader peaks for tolterodine compared to ESI. However, there was no significant difference in chromatographic peak shape, and the repeatability using SSI was similar to that obtained using ESI if a ratio (area of tolterodine/area of metabolite) was used. In this study, the sensitivity was higher using SSI. For the analysis of pregnanolone, less water loss was obtained using SSI, probably due to less energy being transferred to the analyte upon ionization.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Computer generated phase holograms (kinoforms) for millimeter and submillimeter wavelengths

Computer generated Fourier transform phase holograms, known as kinoforms, have been synthesized, manufactured and their performance evaluated at a wavelength of 3 mm (100 GHz). The kinoforms were synthesized to give a prescribed far-field intensity distribution and manufactured by milling the computed kinoform surface relief into a Teflon plate, using a numerically controlled milling machine. The measured diffraction efficiencies exceed 50 percent. Millimeter-wave kinoforms can be used in various quasi-optical applications,e.g. distributing a local oscillator signal to an array of detector elements in heterodyne receivers.