The synthesis of iron–nickel alloy nanoparticles using a reverse micelle technique

Nanosized Fe_0.2Ni_0.8 particles were prepared by reducing their salts with sodium borohydride (NaBH₄) in cationic water-in-oil (w/o) microemulsions of water/cetyl-trimethyl-amonium bromide (CTAB) and n-butanol/isooctane at 25 °C. According to the TEM and X-ray diffraction analyses, the synthesized particles were around 4–12 nm in size. Due to their nanodimensions, the particles had a primitive cubic (pc) structure rather than the body-centered cubic (BCC) structure of the bulk material. An examination of the synthesis from the reverse micelle reveals that the morphology of the iron–nickel alloy nanoparticles depends mainly on the microemulsion's composition. The magnetization of the nanoparticles was much lower than that of the bulk material, reflecting the influence of the nanodimensions on the particles’ magnetizations.     

Flips and the Hilbert scheme over an exterior algebra

We study the tangent space at a monomial point M in the Hilbert scheme that parameterizes all ideals with the same Hilbert function as M over an exterior algebra.     

Uniqueness and continuous dependence on the initial data for a class of non-linear shallow shell problems

This note is concerned with the non-linear shallow shell model introduced in 1966 by W.T. Koiter, and later studied by M. Bernadou and J.T. Oden. We show the uniqueness of the solution to the dynamical model and that this solution is continuous with respect to the initial data. To cite this article: J. Cagnol et al., C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Spectrophotometric and volumetric molybdenum determination with 2,2'-biquinoxalyl

Volumetric and spectrophotometric methods for molybdenum determination based on reaction with 2,2'-biquinoxalyl (2,2'-BQx) in concentrated hydrochloric acid media have been developed. Absorption spectra of the 1,1'-dihydro 2,2'-biquinoxalylene complex shows the most intensive absorption band at 685 nm with molar absorptivity = 3.3 x 10(4) 1. mole(-1). cm(-1). The compound is characterized by good durability to high temperatures and concentrated acid media. The mentioned indicator gives distinct colour changes at the titration end-point. The spectrophotometric method for molybdenum determination is based on the use of the difference in absorbance between the oxidized and reduced forms of 2,2'-BQx. The indicator is reduced with Sn(II) and then part of it is reoxided as a result of addition of Mo(VI). The difference in absorbance between the blank determination and molybdenum sample increases linearily in the concentration range 0.2-2.0 mug Mo/cm(3). 2,2'-Biquinoxalyl was used as an indicator in the volumetric method for the determination of molybdenum concentrations in steel alloy. The interfering ions FE(III) and Cr(III) are easily eliminated as the precipitate of hydroxides. The mineral acids, hydrochloric sulphuric and perchloric acids, have been tested as reaction media.     

Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

Effect of the rhenium additive to VOx/TiO2 and MoOx/TiO2 catalysts on their properties in oxidative dehydrogenation of propane

VO_x/TiO₂ and MoO_x/TiO₂ catalysts with the addition of Re (Re/V or Mo = 0.5) were synthetized and tested in oxidative dehydrogenation of propane and in reduction by propane. XPS measurements showed depletion of the surface in Re. The Re additive does not affect the total conversion of propane, but increases the selectivity to propene. The effect is more pronounced for the MoO_x/TiO₂ catalyst. The increase in the selectivity to propene is accompanied with the increase in the reducibility of the catalysts.     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Asymmetric synthesis of [7]helicene-like molecules

[reaction: see text] A new approach to nonracemic [7]helicene-like molecules has been developed. Stereoselective Co(I)-mediated [2 + 2 + 2] cycloisomerization of aromatic triynes containing an asymmetric carbon atom produces [7]helicene-like scaffolds in diastereomeric ratios up to 100:0. This central-to-helical chirality transfer can be controlled by the absolute configuration at the asymmetric center and by the presence of carbon substituents.