Finite elastic coupling effects in critical sound propagation in dilute Ising systems

The nonasymptotic critical properties of sound propagation induced by finite spin-strain coupling are studied in dilute Ising model aboveT _c by means of renormalization group methods and expansion. It is shown that effective hydrodynamic sound attenuation exponent is lower in compressible systems than in the almost rigid ones. Scaling functions for sound attenuation and dispersion are obtained in the crossover region to the first order.     

INCREASED ENERGY TRANSFER FROM PHYCOBILISOMES TO PHOTOSYSTEM II IN HIGH LIGHT ADAPTED Anabaena cylindrica

Excitation energy transfer from phycobilisomes to photosystem II in high-light adapted cells of Anabaena cylindrica was studied by fluorescence spectroscopy and compared to that of low-light adapted cells. Measurements were made on membrane fragments containing phycobilisomes, photosystem I and II, isolated in 0.75 M K-phosphate. Relative efficiency of 430 to 590 nm light in the excitation of F₆₈₀ chlorophyll fluorescence was compared in low and high light adapted cells, respectively. The values indicate that light energy absorbed by phycobilisomes is transferred to photosystem II antenna chlorophylls with higher efficiency in high-light adapted cells than in low-light adapted cells. Partial dissociation and uncoupling of energy transfer caused by low ion concentration were different in the membrane fragments isolated from the two kinds of cells and indicated a higher aggregation state of pigment-protein complexes of phycobilisomes in high-light adapted A. cylindrica cells.     

Determination of thallium and lead in cadmium salts by anodic stripping voltammetry with addition of surfactants to suppress the cadmium peaks

Conditions have been found which make possible the determination of thallium and/or lead in cadmium and its salts without preliminary separation. The electrochemical activity of the cadmium, which usually interferes in the determination of thallium, is inhibited by the addition of 0.01% of polyethylene glycol of M.W. 4000. Thallium is determined by electrolysis at ?0.74 V vs. SCE, in 0.1M EDTA solution: 10^?1M thallium can be determined in the presence of 0.1M cadmium, while copper and lead at 10^?2M and 10^?5M respectively do not interfere. Lead is determined in 0.1M acetic acid containing 0.1% cetyltrimethylammonium bromide (CTAB). The addition of CTAB shifts the cadmium peak, as well as the optimum deposition potential for cadmium, to more negative values, making it possible to determine lead in the presence of cadmium as long as the deposition potential lies in the range between ?0.50 and ?0.56 V vs. SCE. Lead can be determined in the presence of ten times as much thallium.     

Application of self-assembly for replacing chromate in corrosion protection of zinc

Due to the toxic and carcinogenic properties of hexavalent chromium ion, the corrosion protection with chromating technique needs replacement. Several environmentally friendly alternative metal pretreatments have already been proposed. One of these methods is the application of self-assembling molecules to form mono- or multilayers on the metal surfaces. These layers can prevent metal dissolution due to their dense and stable structure. The objective of our studies was to protect zinc surface against corrosion, with a thin phosphonate layer. Aqueous solutions of diphosphonic acid with different alkyl chain lengths were applied with different treatment times. The layer formation, stability, and corrosion protection of these films were monitored by electrochemical impedance spectroscopy and the effect of 1,5-diphosphono-pentane (DPP) on zinc was studied by polarization curves. The wetting properties were determined by static contact angle measurement. 1,5-Diphosphono-pentane forms a thin layer, with a pronounced protective ability in neutral aqueous solutions. The application of self-assembling molecules can be a promising method to replace the chromating technique on zinc surface.     

Comparative Evaluation of CE and HPLC for Determination of Cotinine in Human Urine

Two rapid and popular methods—capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) have been compared for analysis of cotinine in human urine. Cotinine was analyzed in less than 7 min, with detection limits of 5 and 3.2 ng mL⁻¹ for CE and HPLC, respectively. The performance of the methods was evaluated in terms of sensitivity, specificity, precision, accuracy, and limits of detection and quantification. Calibration plots were linear in the range 50–4,000 ng mL⁻¹, at least, and mean recoveries were satisfactory for both techniques. The methods were successfully used for quantification of cotinine in urine.     

Semi-preparative liquid-chromatographic separation of all four stereoisomers of α-bisabolol on tribenzoylcellulose

Summary A semi-preparative low-pressure liquid-chromatographic procedure using tribenzoylcellulose has been developed for the separation and isolation of the four -bisabolol stereoisomers. Stereochemical assignments were made by HPLC-polarimeter coupling and by using the authentical isomers. This method can be applied to the quality control of chamomile preparations, as it allows the detection of adulterations resulting from admixtures of synthetic -bisabolol. In addition, the isolation of all four -bisabolol stereoisomers from commercially available synthetic -bisabolol has been made possible.     

DSC investigation of the thermal behaviour of (NH4)2SO4, NH4HSO4 and NH4NH2SO3

Gaseous products evolved from (NH₄)₂SO₄, NH₄HSO₄ and NH₄NH₂SO₃ during successive heating and cooling cycles were flushed with inert gas into analyzer Dräger tubes hooked tightly to the terminal port of the DSC cell base. This simple procedure allowed the starting temperature of the decomposition to be determined and the amount of the individual gases in the mixture to be identified and even estimated. NH₄NH₂SO₃ at 523 K in humid air produced HNH₂SO₃ initially and, on further cycling, (NH₄)₂SO₄ and NH₄HSO₄ also appeared. The ΔH_f values for NH₄HSO₄ were (kJ mole^?1): in an airtight sample holder 12.67, in a dry argon atmosphere 11.93, and in a static air atmosphere 10.92. Endothermic peaks for (NH₄)₂SO₄ and 498 and 411 K represented the incongruent melting point and the polymorphic transition of (NH₄)₂SO₄·NH₄HSO₄. After the first heating in air to 530 K, (NH₄)₂SO₄ and NH₄HSO₄ exhibited closely similar cyclic DSC curves. The endothermic peaks at about 393–420 K may be assigned to different combinations of (NH₄)₂SO₄ and NH₄HSO₄.     

Monitoring of the metal displacement from the recombinant mouse liver metallothionein Zn(7)-complex by capillary zone electrophoresis with electrospray MS detection

A solution of a Zn-complex of recombinant mouse MT-1 isoform (Zn(7)-MT-1) was prepared and titrated with Cd(2+) ions. A method based on the coupling of capillary zone electrophoresis (CZE) with electrospray MS detection was developed for the analysis of the stoichiometry of the species formed during the titration. The method offered the possibility of the on-line removal of up to 100 mM Tris or phosphate buffer solutions that would otherwise suppress the electrospray signal. By allowing the determination of the metal stoichiometry of the complex species present in solution the method was shown to be complementary to circular dichroism and UV-VIS spectrophotometry conventionally used for similar studies. The titration of the Zn(7)-MT complex with Cd(II) showed the sequential displacement of the Zn by Cd. The unusually high stability of the Cd(6)Zn(1)-MT species was observed which suggests a structural role of the remaining Zn(II) ion.     

Strong Attraction of Caffeine to the Mercurous Dumbbell in the Salt [Hg2(Caf)2](ClO4)2(H2O)2

Colourless single crystals of the caffeine adduct of mercurous perchlorate dihydrate, [Hg₂(Caf)₂](ClO₄)₂(H₂O)₂, were grown from aqueous solutions of mercurous perchlorate and caffeine by isothermal evaporation at ambient temperature. The crystal structure (monoclinic, P2₁/n, Z = 4, a = 1628.0(2), b = 780.4(1), c = 2229.6(3) pm, β = 99.84(1)°, R₁(all data) = 0.0894) contains [trans‐Caf‐Hg‐Hg‐Caf]²⁺ cations with a Hg‐Hg distance of 250.88(6) pm, Hg‐N (bond) distances of 214.4(6) and 215.1(6) pm and Hg‐Hg‐N angles of 176.9(2) and 165.1(2)°, respectively. These cations are attached via weak Hg‐O contacts to dimers which are further arranged to leave large channels into which one crystal water molecule is included. The second water molecule and the two perchlorate anions are weakly attracted to one Hg atom.     

The Synthesis and Reactions of Yomogi Alcohol. Conversion of the artemisyl skeleton to the santolinyl skeleton by a 1,2-shift of a vinyl group. Synthesis of santolinatriene

The synthesis of yomogi alcohol (2, 5, 5-trimethylhepta-3,6-dien-2-ol, 2 ) is described, and experiments directed towards its allylic rearrangement to artemisia alcohol detervatives have been carried out. Acidic reagents open the ring of yomogi alcohol epoxide ( 16 ) at with participation of the 6,7-double-bond, a shift of the vinyl group results to yield a compound with the santolinyl skeleton. The same reagents are without effect when this double bond reduced. Action of butyllithium of the benzaldehyde acetal ( 41 ) of 2, 5-dimethyl-4-vinyl-2, dihydroxy-hex-5-ene ( 28 ), obtained by acid-catalyzed ring opening of yomogi alcohol epoxide in the presence of benzaldehyde, leads to santolinatriene ( 42 ). This vinyl shift is not observed in the case of O-acetyl yomogi alcohol epoxide ( 46 ), from white a compound believed to be an oxetan 48 (R ? COCH₃) is formed with concomitent shift of the acetate group. Further unusual reactions of the oxetan are described, and some observation about the epoxidation of sterically hindered allyl alcohols and their acetates are made.