Thermodynamic properties of transition metals in aqueous solution. 2. The enthalpies of mixing of aqueous solutions of CoCl2, CuCl2, and MnCl2 with NaCl at varying ionic strength at 25°C

Enthalpies of mixing (_m H) aqueous solutions of CoCl₂, CuCl₂, and MnCl₂ with NaCl solutions were measured at constant ionic strengths of 0.5, 1.0, and 3.0 molal at 25°C. The excess enthalpy equations of Pitzer were then fit to the resulting _m H data. The resulting parameters are the temperature derivatives of the activity coefficient mixing parameters in the Pitzer system. The heat of mixing data for CoCl₂ and CuCl₂ were in agreement with earlier isomolal results by other workers.     

Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Definitive Structural Assessment of Enterococcal Diheteroglycan

Enterococcus faecalis is one of most important nosocomial and often multi‐antibiotic resistant pathogens responsible for infections that are difficult to treat. Previously, a cell‐wall polysaccharide termed diheteroglycan (DHG) was isolated and characterized as a promising vaccine candidate. However, the configuration of its lactic acid (LA) residue attached to the galactofuranoside unit was not assessed, although it influences conformation of DHG chain in terms of biological recognition and immune evasion. This study proves the R configuration of the LA residue by means of chemical analysis, investigation of intramolecular NMR nuclear Overhauser effects and molecular dynamics simulations of native DHG and corresponding R and S models, which were obtained by using pyranoside‐into‐furanoside rearrangement. As alternative treatment and prevention strategies for E. faecalis are desperately needed, this discovery may offer the prospect of a synthetic vaccine to actively immunize patients at risk.     

Pyranoside‐into‐Furanoside Rearrangement: New Reaction in Carbohydrate Chemistry and Its Application in Oligosaccharide Synthesis

Great interest in natural furanoside‐containing compounds has challenged the development of preparative methods for their synthesis. Herein a novel reaction in carbohydrate chemistry, namely a pyranoside‐into‐furanoside (PIF) rearrangement permitting the transformation of selectively O‐substituted pyranosides into the corresponding furanosides is reported. The discovered process includes acid‐promoted sulfation accompanied by rearrangement of the pyranoside ring into a furanoside ring followed by solvolytic O‐desulfation. This process, which has no analogy in organic chemistry, was shown to be a very useful tool for the synthesis of furanoside‐containing complex oligosaccharides, which was demonstrated by synthesizing disaccharide derivatives α‐D ‐Galp‐(1→3)‐β‐D ‐ Galf ‐OPr, 3‐O‐s ‐lactyl‐β‐D ‐ Galf ‐(1→3)‐β‐D ‐Glcp‐OPr, and α‐L ‐ Fucf ‐(1→4)‐β‐D ‐GlcpA‐OPr related to polysaccharides from the bacteria Klebsiella pneumoniae and Enterococcus faecalis and the brown seaweed Chordaria flagelliformis.     

Clay-based affinity probes for selective cleanup and determination of aflatoxin B1 using nanostructured montmorillonite on quartz

A study was conducted to investigate the selective cleanup and determination of aflatoxin B1 (AfB1) from contaminated media. Composite adsorbents were formulated from calcium montmorillonite clay, which possesses a high affinity and enthalpy of adsorption for AfB1. Nanostructuring techniques were used to construct various formulations of the clay-based composite media. In AfB1 adsorption studies with prototypical affinity columns, these composites offered narrowly defined, reproducible capacity ranges. Composite recoveries of AfB1 from spiked grains exhibited linear trends that correlated well with the range of spike levels. Composite columns provided lower recoveries of AfB1 from naturally contaminated corn than did immunoaffinity columns; however, recoveries were consistent and purified extracts were free of interfering compounds, as determined by liquid chromatography with fluorescence detection.     

THE QUANTUM EFFICIENCY OF DYE-INDUCED PHOTOELECTRIC EFFECTS IN BILAYER MEMBRANES

Abstract— Voltage transients are generated across lipid bilayer membranes by light flashes as a result of photophysical processes in sorbed dyes which displace electrical charges. A theory is presented which indicates that: (i) the fraction of sorbed dye which displaces charge from one flash can be determined by the fractional reduction in the photovoltage amplitude resulting from a second and identical flash, providing the second flash occurs before dye excited by the first flash returns to its equilibrium condition. (ii) The photoeffect quantum efficiency can be determined from the fraction of dye displacing charge, the light intensity and the dyes' optical absorption cross section. Apparatus constraints required different experimental procedures for dyes with different excited state life times, which are discussed. Experimental results are presented for an azo dye, 3,3'-bis(α-(trimethyiammonium)methyl)azobenzenebromide (Bis-Q), three carbocyanine dyes in the series 3,3'-dimethyl-2,2'-oxacarbocyanine-iodide (diO-C₁-3), an amino-pyridinium dye, 4-( p -(dimethyl-amino)styryl)-1-rnethyl-pyridinium-iodide (di-1-ASP), and a xanthene dye, 2',4',5',7'-tetraiodofluorescein (erythrosin), the sodium salt of which is known as F, D and C red number 3. The dyes' optical absorption cross section values are uncertain owing to solvent and orientational effects in membranes. Photoeffect quantum efficiency values obtained by calculating optical absorption cross sections from the dyes' molar extinction coefficients in aqueous solutions are: Bis-Q (0.08), diO-C₁-3 (0.31), diO-C₂-3 (0.22), diO-C₅-3 (0.08), di-l-ASP (0.3) and erythrosin (0.39).     

光学特异材料的设计

In this contribution we review our latest achievements of combined experimental and theoretical studies to tailor the properties of optical metamaterials（MMs） at will. We give three examples of metamaterial designs that have been realized by means of electron-beam lithography and whose spectroscopic characteristics have been comprehensively investigated. In every case, our experiments are complemented by rigorous numer ical simulations. Particular emphasis is put on the significance of such tailored effective properties of optical MMs     

Comparison of monomethoxy‐, dimethoxy‐, and trimethoxysilane anchor groups for surface‐initiated RAFT polymerization from silica surfaces

The immobilization of reversible addition–fragmentation chain transfer (RAFT) agents on silica for surface‐initiated RAFT polymerizations (SI‐RAFT) via the Z‐group approach was studied systematically in dependence of the functionality of the RAFT‐agent anchor group. Monoalkoxy‐, dialkoxy‐, and trialkoxy silyl ether groups were incorporated into trithiocarbonate‐type RAFT agents and bound to planar silica surfaces as well as to silica nanoparticles. The immobilization efficiency and the structure of the bound RAFT‐agent film varied strongly in dependence of the used solvent (toluene vs. 1,2‐dimethoxyethane) and the anchor group functionality, as evidenced by atomic force microscopy, transmission electron microscopy, dynamic light scattering, and UV/Vis spectroscopy. Surface‐initiated RAFT polymerizations using functionalized silica nanoparticles revealed that grafted oligomers, which often occur in SI‐RAFT, are not formed within the crosslinked structures that originate from the immobilization, and that RAFT‐agent films that show less aggregation during the immobilization are more efficient during SI‐RAFT in terms of polymer grafting density. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 103–113     

Non‐Planar Lithium‐Phthalocyanine in the Double Salt (nBu4N)2[Lipc]PF6

We report the synthesis of the diamagnetic double salt bis(tetra(n‐butyl)ammonium) phthalocyanato(2‐)lithate hexafluorophosphate (nBu₄N)₂[Lipc]PF₆ [pc = phthalocyanine, nBu₄N⁺ = tetra(n‐butyl)ammonium] in dme (dme = dimethoxyethane). According to single‐crystal X‐ray diffraction structure analysis [P$\bar{1}$ , a = 8.642(2) Å, b = 12.820(3) Å, c = 15.019(3) Å, α = 83.01(3)°, β = 87.87(3)°, γ = 74.45(3)°, Z = 1, R₁ = 6.4 %], the phthalocyanine building bloc shows a substantial distortion of the macrocyclic ring from planarity. The deviation from D_4h symmetry originates from packing effects induced by the two tetra(n‐butyl)ammonium cations located above and below the macrocycle. DFT structure optimization starting from the experimental non‐planar configuration produces a fully planar complex anion [Lipc]^–.