Well‐defined polyisoprene‐grafted silica nanoparticles via the RAFT process

The preparation of well‐defined polyisoprene‐grafted silica nanoparticles (PIP‐g‐SiO₂ NPs) was investigated. Surface initiated reversible addition fragmentation chain transfer (SI‐RAFT) polymerization was used to polymerize isoprene from the surface of 15 nm silica NPs. A high temperature stable trithiocarbonate RAFT agent was anchored onto the surface of particles with controllable graft densities. The polymerization of isoprene mediated by silica anchored RAFT with different densities were investigated and compared to the polymerization mediated by free RAFT agents. The effects of different temperatures, initiators, and monomer feed ratios on the kinetics of the SI‐RAFT polymerization were also investigated. Using this technique, block copolymers of polyisoprene and polystyrene on the surface of silica particles were also prepared. The well‐defined synthesized PIP‐g‐SiO₂ NPs were then mixed with a polyisoprene matrix which showed a good level of dispersion throughout the matrix. These tunable grafted particles have potential applications in the field of rubber nanocomposites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1493–1501     

Synthesis of poly(methyl acrylate) loops grafted onto silica nanoparticles via reversible addition‐fragmentation chain transfer polymerization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used to produce poly(methyl acrylate) (pMA) loops grafted onto silica nanoparticles using doubly anchored bifunctional RAFT agents 1,4‐bis(3′‐trimethoxysilylpropyltrithiocarbonylmethyl)benzene (Z‐group approach) and 1,6‐bis(o,p‐2′‐trimethoxysilylethylbenzyltrithiocarbonyl)hexane (R‐group approach) as mediators. In both cases, molecular weights of the resulting surface‐confined polymer loops increased with monomer conversion, whereas the grafting density was significantly higher in the case of the R‐group supported RAFT polymerization due to mechanistic differences of the RAFT process at the surface. This result was evident from thermogravimetric analysis and supported by scanning electron microscopy. Polymer loops with molecular weights up to 53,000 g mol^?1 were accessible with polydispersities of about 2.0 without and 1.5 with the addition of free RAFT agent. UV signals of the detached pMA loops measured via size exclusion chromatography were shifted to higher molecular weights compared with the corresponding RI signals, indicating branching reactions caused by the close proximity of growing radicals and polymer at the surface of the silica nanoparticles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7656–7666, 2008     

Stability and utility of pyridyl disulfide functionality in RAFT and conventional radical polymerizations

Two RAFT agents, suitable for inducing living radical polymerization in water, have been synthesized. Both RAFT agents were shown to be effective over the temperature range 25–70 °C. One RAFT agent was functionalized with a pyridyl disulfide group. RAFT efficacy was demonstrated for the polymerizations of N‐isopropyl acrylamide (NIPAAM) and poly(ethylene oxide)‐acrylate (PEG‐A) in both water and acetonitrile. The kinetic data indicates that the pyridyl disulfide functionality is largely benign in free radical polymerizations, remaining intact for subsequent reaction with thiol groups. This result was confirmed by studying conventional radical polymerizations in the presence of hydroxyethyl pyridyl disulfide. The utility of the pyridyl disulfide functionality at the terminus of the polymers was demonstrated by synthesizing polymer‐BSA conjugates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7207–7224, 2008     

α‐Cyanobenzyl dithioester reversible addition–fragmentation chain‐transfer agents for controlled radical polymerizations

A series of new reversible addition–fragmentation chain transfer (RAFT) agents with cyanobenzyl R groups were synthesized. In comparison with other dithioester RAFT agents, these new RAFT agents were odorless or low‐odor, and this made them much easier to handle. The kinetics of methyl methacrylate radical polymerizations mediated by these RAFT agents were investigated. The polymerizations proceeded in a controlled way, the first‐order kinetics evolved in a linear fashion with time, the molecular weights increased linearly with the conversions, and the polydispersities were very narrow (～1.1). A poly[(methyl methacrylate)‐block‐polystyrene] block copolymer was prepared (number‐average molecular weight = 42,600, polydispersity index = 1.21) from a poly(methyl methacrylate) macro‐RAFT agent. These new RAFT agents also showed excellent control over the radical polymerization of styrenics and acrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1535–1543, 2005     

Reversible addition–fragmentation chain transfer polymerization of 2‐naphthyl acrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

The reversible addition–fragmentation chain transfer (RAFT) polymerizations of 2‐naphthyl acrylate (2NA) initiated by 2,2′‐azobisisobutyronitrile were investigated with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as a RAFT agent at various temperatures in a benzene solution. The results of the polymerizations showed that 2NA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion. The polydispersities of the polymer were relatively low up to high conversions in all cases. The chain‐extension reactions of poly(2‐naphthyl acrylate) (P2NA) with methyl methacrylate and styrene successfully yielded poly(2‐naphthyl acrylate)‐b‐poly(methyl methacrylate) and poly(2‐naphthyl acrylate)‐b‐polystyrene block polymers, respectively, with narrow polydispersities. The P2NA obtained by RAFT polymerization had a strong ultraviolet absorption at 270 nm, and the molecular weights had no apparent effect on the ultraviolet absorption intensities; however, the fluorescence intensity of P2NA increased as the molecular weight increased and was higher than that of 2NA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2632–2642, 2005     

Accelerated brush growth on nanoparticle surfaces by reversible addition‐fragmentation chain transfer polymerization

It is now well established that controlling the grafted chain lengths and densities on nanoparticle surfaces determines the effective interactions between particles, and their assembly. Here, we present unusual kinetic results for achieving grafted chain lengths longer than the free chains using reversible addition‐fragmentation chain transfer (RAFT) polymerization and discuss the limitations to obtaining polymer grafting density higher than ～0.06 chains/nm². We observe that surface initiated polymerization grows faster than the free chains in solution with high RAFT agent coverage (1.95 agents/nm²) on nanoparticles. The time‐dependence of graft density suggests that activation of the anchored chain transfer agent (CTA) is limited by the diffusion of macro‐radicals within growing grafts. Thus, radical transfer and exchange reactions become inefficient between grafts and free polymer, and convert the surface‐initiated RAFT mechanism to a free radical polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1700–1705     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of magnetic,reactive, and thermoresponsive Fe3O4 nanoparticles via surface‐initiated RAFT copolymerization of N‐isopropylacrylamide and acrolein

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto Fe₃O₄ nanoparticles in a simple procedure using a ligand exchange reaction of S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate with oleic acid initially present on the surface of pristine Fe₃O₄ nanoparticles. The RAFT agent‐functionalized Fe₃O₄ nanoparticles were then used for the surface‐initiated RAFT copolymerization of N‐isopropylacrylamide and acrolein to fabricate structurally well‐defined hybrid nanoparticles with reactive and thermoresponsive poly(N‐isopropylacrylamide‐co‐acrolein) shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐initiated RAFT copolymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow molecular weight distributions of the copolymers grown from the nanoparticles. The resulting novel magnetic, reactive, and thermoresponsive core‐shell nanoparticles exhibited temperature‐trigged magnetic separation behavior and high ability to immobilize model protein BSA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 542–550, 2010     

Designing catechol‐end functionalized poly(DMAm‐co‐NIPAM) by RAFT with tunable LCSTs

Providing catechol‐end functionality to controlled structure lower critical solution temperature (LCST) copolymers is attractive, given the versatility of catechol chemistry for tethering to nanostructures. Controlled polymer chain lengths with catechol RAFT end groups are of interest to provide tunable LCST behavior to nanoparticles, although these polymerizations are relatively unexplored. Herein, the reactivity ratios for the RAFT copolymerization of N,N‐dimethylacrylamide (DMAm) and N‐isopropylacrylamide (NIPAM) pairs based on catechol‐end RAFT agents using an in situ NMR technique were first determined. Several catechol‐end poly(DMAm‐co‐NIPAM) samples were then prepared using the RAFT agent to provide copolymer. The reactivity ratios for the DMAm‐NIPAM pair were r_DMAm = 1.28–1.31 and r_NIPAM = 0.48–0.51. All the poly(DMAm‐co‐NIPAM) samples were found to have M_n values ≤ 26 kDa and Ð < 1.08 with LCST values ranging from 31 to 92°C, while maintaining a short range of glass transition temperature (T_g = 118–137°C). The difference in LCST values for the catechol functionalized poly(DMAm‐co‐NIPAM) based on 0.5 wt% aqueous buffered solutions at pH 5.5 and 8.5 was found to be <3.0°C. These conditions are suitable for subsequent catechol‐induced coordination and nucleophilic addition chemistry for covalent and noncovalent linkages during subsequent post‐modification. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4062–4070     

Designing superhydrophobic surface based on fluoropolymer–silica nanocomposite via RAFT‐mediated polymerization‐induced self‐assembly

Superhydrophobic surfaces (SHS) find versatile applications as coatings due to their very high water‐repellency, self‐cleaning, and anti‐icing properties. This investigation describes the preparation of a SHS from surfactant‐free hybrid fluoropolymer latex. In this case, reversible addition‐fragmentation chain transfer (RAFT) polymerization was adopted to prepare a copolymer of 4‐vinyl pyridine (4VP) and vinyl triethoxysilane (VTES), where the pyridine units were quaternized to make the copolymer soluble in water. The copolymer was further used as a macro‐RAFT agent to polymerize 2,2,2‐trifluoroethyl methacrylate (TFEMA) in a surfactant‐free emulsion via polymerization‐induced self‐assembly (PISA). The macro‐RAFT agent contained a small amount of VTES as co‐monomer which was utilized to graft silica nanoparticles (SNPs) onto the P(TFEMA) spheres. The film prepared using the nanocomposite latex exhibited a nano‐structured surface as observed by SEM and AFM analyses. Surface modification of the film with fluorinated trichlorosilane produced an SHS with a water contact angle (WCA) of 151.5°. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 266–275     

Reversible addition–fragmentation chain‐transfer polymerization: Unambiguous end‐group assignment via electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry was performed to identify the structure of polymeric methyl acrylates generated via the cumyl dithiobenzoate (CDB), cumyl p‐fluorodithiobenzoate (CPFDB), and 1‐phenylethyl dithiobenzoate (PEDB) mediated reversible addition–fragmentation chain‐transfer (RAFT) polymerizations. The relatively simple spectra clearly demonstrate the end groups of this living free‐radical polymerization technique. Only polymeric chains carrying one leaving group of the RAFT agent and the dithiobenzoate end group as the active RAFT center were discovered. Multiple‐stage mass spectrometric experiments and oxidation of the dithioester end group confirmed the structure of the generated polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4032–4037, 2002     

Reversible addition–fragmentation chain transfer polymerization of glycidyl methacrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

A reversible addition–fragmentation chain transfer (RAFT) agent, 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN), was synthesized and applied to the RAFT polymerization of glycidyl methacrylate (GMA). The polymerization was conducted both in bulk and in a solvent with 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at various temperatures. The results for both types of polymerizations showed that GMA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion up to 96.7% at 60 °C, up to 98.9% at 80 °C in bulk, and up to 64.3% at 60 °C in a benzene solution. The polymerization rate of GMA in bulk was obviously faster than that in a benzene solution. The molecular weights obtained from gel permeation chromatography were close to the theoretical values, and the polydispersities of the polymer were relatively low up to high conversions in all cases. It was confirmed by a chain‐extension reaction that the AIBN‐initiated polymerizations of GMA with CPDN as a RAFT agent were well controlled and were consistent with the RAFT mechanism. The epoxy group remained intact in the polymers after the RAFT polymerization of GMA, as indicated by the ¹H NMR spectrum. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2558–2565, 2004     

Kinetic model of reversible addition‐fragmentation chain transfer polymerization in microemulsions

A simplified kinetic model for RAFT microemulsion polymerization has been developed to facilitate the investigation of the effects of slow fragmentation of the intermediate macro‐RAFT radical, termination reactions, and diffusion rate of the chain transfer agent to the locus of polymerization on the control of the polymerization and the rate of monomer conversion. This simplified model captures the experimentally observed decrease in the rate of polymerization, and the shift of the rate maximum to conversions less than the 39% conversion predicted by the Morgan model for uncontrolled microemulsion polymerizations. The model shows that the short, but finite, lifetime of the intermediate macro‐RAFT radical (1.3 × 10^?4–1.3 × 10^?2 s) causes the observed rate retardation in RAFT microemulsion polymerizations of butyl acrylate with the chain transfer agent methyl‐2‐(O‐ethylxanthyl)propionate. The calculated magnitude of the fragmentation rate constant (k_f = 4.0 × 10¹–4.0 × 10³ s^?1) is greater than the literature values for bulk RAFT polymerizations that only consider slow fragmentation of the macro‐RAFT radical and not termination (k_f = 10^?2 s^?1). This is consistent with the finding that slow fragmentation promotes biradical termination in RAFT microemulsion polymerizations. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 604–613, 2010     

A cyclic selenium‐based reversible addition‐fragmentation chain transfer agent mediated polymerization of vinyl acetate

A cyclic selenium‐based reversible addition‐fragmentation chain transfer (RAFT) agent, 5,5‐dimethyl‐3‐phenyl‐2‐selenoxo‐1,3‐selenazolidin‐4‐one (RAFT‐Se), was synthesized and utilized in the RAFT polymerizations of vinyl acetate (VAc). Its analog, 5,5‐dimethyl‐3‐phenyl‐2‐thioxothiazolidin‐4‐one (RAFT‐S), was also used in RAFT polymerizations for comparison under identical conditions. The RAFT polymerizations of VAc with RAFT‐Se were moderately controlled evidenced by the increase of molecular weights with conversion, despite the slightly high M_w/M_n (less than 1.90), whereas the molecular weights were poorly controlled in the presence of RAFT‐S (2.00 < M_w/M_n < 2.30). Thanks to its unusual cyclic structure of RAFT‐Se, one or more RAFT‐Se species was incorporated into the resultant poly(VAc) as revealed by the results of cleavage of polymer and atomic absorption spectroscopy. Considering the biorelated functions of both poly(VAc) and Se element, this work undoubtedly provided a successful methodology of how to incorporate high content of Se into a molecular weight controlled poly(VAc). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel perfluorocyclobutyl aryl ether‐based well‐defined amphiphilic block copolymer

A series of fluorine‐containing amphiphilic diblock copolymers comprising hydrophobic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) (PTPFCBPMA) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments were synthesized via successive reversible addition fragmentation chain transfer (RAFT) polymerizations. RAFT homopolymerization of p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate was first initiated by 2,2′‐azobisisobutyronitrile using cumyl dithiobenzoate as chain transfer agent, and the results show that the procedure was conducted in a controlled way as confirmed by the fact that the number‐average molecular weights increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.30. Dithiobenzoate‐capped PTPFCHPMA homopolymer was then used as macro‐RAFT agent to mediate RAFT polymerization of 2‐(diethylamino)ethyl methacrylate, which afforded PTPFCBPMA‐b‐PDEAEMA amphiphilic diblock copolymers with different block lengths and narrow molecular weight distributions (M_w/M_n ≤ 1.28). The critical micelle concentrations of the obtained amphiphilic diblock copolymers were determined by fluorescence spectroscopy technique using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the formed micelles were investigated by transmission electron microscopy and dynamic light scattering, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

(Thiocarbonyl‐α‐thio)carboxylic acid derivatives as transfer agents in reversible addition–fragmentation chain‐transfer polymerizations

Ethyl S‐(thiobenzoyl)thioacetate, ethyl S‐thiobenzoyl‐2‐thiopropionate, and S‐(thiobenzoyl)thioglycolic acid were used as chain‐transfer agents for the reversible addition–fragmentation chain‐transfer (RAFT) polymerizations of styrene, methyl methacrylate, and butyl acrylate. Of these polymerizations, only those of styrene and butyl acrylate with any of the transfer agents showed molecular weight control corresponding to controlled/living polymerizations. The best molecular weight control was observed for the polymerizations of styrene and butyl acrylate with ethyl (S)‐thiobenzoyl‐2‐thiopropionate. Semiempirical PM3 calculations were performed for the investigation of the relative heats of reaction of the chain‐transfer equilibria between the aforementioned chain‐transfer agents and dimer radicals of the three monomers. The molecular weight control of the polymerizations correlated with the stability trend of the leaving‐group radical of the chain‐transfer agent. This relatively simple computational model offered some value in determining which transfer agents would show the best molecular weight control in RAFT polymerizations. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 555–563, 2002; DOI 10.1002/pola.10143     

Surface-Initiated RAFT Polymerization of 2,3-Dimethyl-1,3-butadiene on Silica Nanoparticles for Matrix-free Methyl Rubber Nanocomposites

Reversible addition-fragmentation chain transfer (RAFT) polymerization of 2,3-dimethyl-1,3-butadiene (DMB) in solution and on the surface of silica nanoparticles was investigated and PDMB-grafted silica nanoparticles (PDMB-g-SiO₂ NPs) with different chain densities and molecular weights were prepared. The kinetic studies of DMB polymerization mediated by silica anchored RAFT agents at different graft densities were investigated and compared to the polymerization mediated by the corresponding free RAFT agent. The PDMB-g-SiO₂ NPs were cured to prepare rubbery films and obtain matrix-free nanocomposites, which exhibited a good dispersion of silica nanoparticles and improved mechanical properties compared to the unfilled crosslinked rubber. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 417–427     

Synthesis and characterization of tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers via RAFT polymerization

A new bipyridine‐functionalized dithioester was synthesized and further used as a RAFT agent in RAFT polymerization of styrene and N‐isopropylacrylamide. Kinetics analysis indicates that it is an efficient chain transfer agent for RAFT polymerization of the two monomers which produce polystyrene and poly(N‐isopropylacrylamide) polymers with predetermined molecular weights and low polydispersities in addition to the end functionality of bipyridine. The bipyridine end‐functionalized polymers were further used as macroligands for the preparation of star‐shaped metallopolymers. Hydrophobic polystyrene macroligand combined with hydrophiphilic poly(N‐isopropylacrylamide) was complexed with ruthenium ions to produce amphiphilic ruthenium‐cored star‐shaped metallopolymers. The structures of these synthesized metallopolymers were further elucidated by UV–vis, fluorescence, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC) as well as NMR techniques. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4225–4239, 2007     

Synthesis and characterization of telechelic polymethacrylates via RAFT polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique has been employed to synthesize linear α,ω ‐telechelic polymers with either hydroxyl or carboxyl end groups. Methyl methacrylate, butyl methacrylate, and butyl acrylate were polymerized with RAFT polymerization. The polymerizations exhibited the usual characteristics of living processes. Telechelic polymethacrylates were obtained from a hydroxyl monofunctional RAFT polymer with a two‐step chain‐end modification procedure of the dithioester end group. The procedure consisted of an aminolysis followed by a Michael addition on the resulting thiol. The different steps of the procedure were followed by detailed analysis. It was found that this route was always accompanied by side reactions, resulting in disulfides and hydrogen‐terminated polymer chains as side products next to the hydroxyl‐terminated telechelic polymers. Telechelic poly(butyl acrylates) with carboxyl end groups were produced in a single step procedure with difunctional trithiocarbonates as RAFT agents. The high yield in terms of end group functionality was confirmed by a new critical‐liquid‐chromatography method, in which the polymers were separated based on acid‐functionality and by mass spectrometry analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 959–973, 2005     

Synthesis of cationic N‐[3‐(dimethylamino)propyl]methacrylamide brushes on silicon wafer via surface‐initiated RAFT polymerization

Surface‐initiated reversible addition‐fragmentation chain transfer (SI‐RAFT) polymerization of N‐[3‐(dimethylamino)propyl]methacrylamide (DMAPMA) on the silicon wafer was conducted in attempt to create controllable cationic polymer films. The RAFT agent‐immobilized substrate was prepared by the silanization of hydroxyl groups on silicon wafer with 3‐aminopropylthriethoxysilane (APTS) and by the amide reaction of amine groups of APTS with ester groups of 4‐cyano‐4‐((thiobenzoyl) sulfanyl) pentanoic succinimide ester (CPSE); followed by the RAFT polymerization of DMAPMA using a “free” RAFT agent, that is, 4‐cyanopentanoic acid dithiobenzoate (CPAD) and an initiator, that is, 4,4′‐azobis‐4‐cyanopentanoic acid (CPA). The formation of homogeneous tethered poly(N‐[3‐(dimethylamino)propyl]methacrylamide) [poly(DMAPMA)] brushes, whose thickness can be tuned by reaction time varying, is evidenced by using the combination of grazing angle attenuated total reflectance‐Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, and water contact‐angle measurements. The calculation of grafting parameters from the number‐average molecular weight, M _n (g/mol) and ellipsometric thickness, h (nm) values indicated the synthesis of densely grafted poly(DMAPMA) films and allowed us to predict a polymerization time for forming a “brush‐like” conformation for the chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011