Simultaneous quantification of leukotrienes and hydroxyeicosatetraenoic acids in cell culture medium using liquid chromatography/tandem mass spectrometry

Leukotrienes (LTs) and hydroxyeicosatetraenoic acids (HETEs) are important bioactive lipid mediators that participate in various pathophysiological processes. To advance understanding of the mechanisms that regulate these mediators in physiological and pathological processes, an analytical method using liquid chromatography/tandem mass spectrometry for the simultaneous quantification of LTB₄, LTC₄, LTD₄, LTE₄, 5‐HETE_, 8‐HETE, 12‐HETE and 15‐HETE in cell culture media was developed. A Supel?‐Select HLB solid‐phase extraction cartridge was used for sample preparation. The compounds were separated on a C₁₈ column using gradient elution with acetonitrile–water–formic acid (20:80:0.1, v/v/v) and acetonitrile–formic acid (100:0.1, v/v). The calibration curves of LTB₄, LTD₄, LTE₄ and HETEs were linear in the range of 0.025–10 ng/mL, and the calibration curve of LTC₄ was linear in the range of 0.25–10 ng/mL. Validation assessment showed that the method was highly reliable with good accuracy and precision. The stability of LTs and HETEs was also investigated. Using the developed method, we measured LTs and HETEs in the culture supernatant of the human mast cell line HMC‐1. The present method could facilitate investigations of the mechanisms that regulate the production, release and signaling of LTs and HETEs. Copyright © 2014 John Wiley & Sons, Ltd.     

HPLC with fluorescence detection assay of perampanel,a novel AMPA receptor antagonist,in human plasma for clinical pharmacokinetic studies

Perampanel (Fycompa®), a novel α‐amino‐3‐hydroxy‐5‐methyl‐4‐isoxazolepropionic acid (AMPA) receptor antagonist, is registered for the adjunctive treatment of patients (aged ≥12 years) with refractory partial‐onset seizures. To support therapeutic drug monitoring, a simple high‐performance liquid chromatography (HPLC) assay with fluorescence detection was developed to determine perampanel concentrations in human plasma and validated to support clinical trials. Human plasma samples (1.0 mL) were processed by liquid extraction using diethyl ether, followed by chromatographic separation on a YMC Pack Pro C₁₈ column (150 × 4.6 mm i.d., 5 µm) with isocratic elution of acetonitrile–water–acetic acid–sodium acetate (840:560:3:1.8, v/v/v/w) at a flow rate of 1.0 mL/min. Column eluent was monitored at excitation and emission wavelengths of 290 and 430 nm, respectively. The assay was linear (range 1.0–500 ng/mL) and this could be extended to 25 µg/mL by 50‐fold dilution integrity. No endogenous peaks were detected in the elution of analytes in drug‐free blank human plasma from six individuals and no interference was observed with co‐medications tested. Intra‐ and inter‐batch reproducibility studies demonstrated accuracy and precision within the acceptance criteria of bioanalytical guidelines. Validation data demonstrated that our assay is simple, selective, reproducible and suitable for therapeutic drug monitoring of perampanel. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication of Al nanoparticles and their electrical properties studied by capacitance-voltage measurements

Nanometer-scale Al particles are fabricated and are embedded in a GaAs matrix using molecular beam epitaxial technique. The Al particle is self-assembled on GaAs by supplying an Al molecular beam. The average particle size is found to be 25 nm. The density is 7 × 10¹⁰ cm⁻² when Al of 6.2 × 10¹⁵ atoms/cm² is supplied on (1 0 0)GaAs at a substrate temperature of 300 °C. Clear hysteresis and plateaus in capacitance-voltage (C-V) curves are found in an Al-embedded sample, whereas monotonic increase of capacitance is obtained in a reference sample having an AlAs layer instead of Al. This difference results from trapping of electrons by the Al particles, suggesting that the particles have metallic character.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Polymerization of tetraallyl ammonium chloride

The radical polymerization of tetraallyl ammonium chloride (TAAC) was carried out in water using azo-initiator as compared to that of diallyl dimethyl ammonium chloride (DADMAC); the rate of polymerization was quite low for TAAC, around one-third of DADMAC. Kinetic discussion revealed the importance of degradative chain transfer in the polymerization of TAAC. The cyclopolymerizability of TAAC was estimated kinetically as the ability of 5-membered monocyclic radical to form a bicyclic ring, giving the cyclization constant of 21 mol/L at [M] = 2 mol/L. Gelation occurred at around 20% conversion.     

Reaction of enaminones with carbon disulfide: Synthesis of heterocycles using enamino dithiocarboxylates

Reaction of various types of enaminones, which are prepared by the condensation of 1,3-dicarbonyl compounds with aromatic amines, with carbon disulfide in the presence of sodium hydroxide as the base in dimethyl sulfoxide to give the corresponding enamino dithiocarboxylates, 1,3-thiazines and trithiones. Enamino dithiocarboxylates are cyclized under refluxing in diphenyl ether to give the fused quinoline derivatives. The reaction of 6-arylamino-1,3-dimethyluracils with excess carbon disulfide in the presence of sodium hydroxide and subsequent methylation with dimethyl sulfate gave directly the corresponding 1,3-dimethyl-5-methylthiopyrimido[4,5-b]quinoline-2,4(1H,3H)-diones.     

Remote substituent effect favoring the formation of syn-adducts in the chelation controlled radical reactions of γ-benzyloxy-α-methylenecarboxylic acid esters

The chelation controlled radical reactions of ethyl γ-benzyloxy-α-methylenecarboxylates bearing a bulky γ-substituent, such as CHMe₂, CHPh₂, c-C₆H₁₁ and CH(Ph)OTBDMS, with alkyl iodides gave the syn-adducts with high diastereoselectivities. However, the diastereoselectivity for the substrates bearing a γ-substituent CH(i-Pr)OTBDMS depended critically on the configuration of the substituent; the substrate bearing the OTBDMS group anti to the γ-benzyloxy group showed poor diastereoselectivity, but its diastereomer gave syn-adduct exclusively. The high syn-selectivitiy is referred to the H-atom transfer to the outside face of radical center in the sharply folded seven-membered chelate intermediate bearing the ethoxy group with Z-geometry. The corner flapping of the radical center atom of the global minimum energy conformer generates a local minimum conformer and the H-atom transfer to the outside face of the radical center of the newly formed structure gives the anti-adduct. The poor diastereoselectivity is due to the very small energy difference between the two conformers and consequently both the syn- and anti-adducts are yielded in nearly equal amounts.     

Second-derivative spectrophotometric study on the interactions of chlorpromazine and triflupromazine with bovine serum albumin

The second-derivative spectra of chlorpromazine (CPZ) or triflupromazine (TFZ) in buffer solutions (pH 7.4) containing various amounts of BSA (the reference solutions contained the same amount of BSA) showed derivative isosbestic points. The residual background signals derived from incomplete suppression of BSA signals can be entirely eliminated in the second-derivative spectra and BSA has spectrophotometrically one kind of binding site for CPZ or TFZ. The fractions of the drugs bound to BSA were calculated from the derivative intensity differences (ΔD values) of CPZ or TFZ before and after the addition of BSA. Scatchard plot experiments suggested that the binding of the drugs to BSA could be explained as a partition like non-specific binding model. The association constants (K) of CPZ or TFZ with BSA were calculated from the ΔD values according to the non-specific binding model by a nonlinear least-squares method. The K values were almost constant for all of the drug concentrations studied, and good reproducibility was obtained. The fractions predicted by the K values were in good coincidence to the observed values. These results confirm the usefulness of the proposed derivative method which does not need any separation procedures.     

Application of phenolic compounds in plants for green chemical materials

1. Download : Download high-res image (477KB)
2. Download : Download full-size image

     

Synthesis of pyrimidine derivatives using N-bis(methylthio)methylenecyanamide

N-Bis(methylthio)methylenecyanamide ( 1 ) was allowed to react with active methylene compounds (methyl cyanoacetate, dimethyl malonate, ethyl acetoacetate, ethyl phenylacetate) in the presence of potassium carbonate or potassium hydroxide in dimethyl sulfoxide followed by the treatment using appropriate a base or an acid to give the corresponding 6-methylthiouracil derivatives in 15–80% yields. These uracil derivatives are found to be useful intermediates for the synthesis of 6-aminouracils and fused pyrimidine derivatives.