Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(benzoxazole)s of high molecular weights has been developed. These polymers were prepared readily by direct polycondensation of aromatic dicarboxylic acids containing phenyl either structure with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid (PPMA) as condensing agent and solvent. Polycondensations proceeded fast and was completed within 5 h at 140°C and produced poly(benzoxazole)s with inherent viscosities up to 4.6 dL/g. Model compound work was performed in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(benzoxazole)s showed 10% weight loss in air and nitrogen at 450–505°C and 465–535°C, respectively.     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Highly Selective Asymmetric Intramolecular Selenocyclisation

Asymmetric intramolecular selenocyclisation of alkenoic acids, alkenols and alkenyl urethanes using chiral ferrocenylselenenyl cations proceeds smoothly to give the corresponding lactones, cyclic ethers and N-heterocyclic compounds, respectively, in moderate yields with very high diastereoselectivities.     

Chiral Bis(oxazoline)-copper Catalyzed Enantioselective Imidation of Sulfides

Prochiral sulfides reacted with Phl=NTs in the presence of a catalytic amount of Cu(I) salt together with a chiral 4,4′-disubstituted bis(oxazoline) ligand to afford the corresponding chiral sulfimides.     

Chalcogen Chiral Ylides for the Catalytic Asymmetric Epoxidation of Aldehydes: From Sulfur to Selenium and Tellurium

Abstract

The reaction of novel chiral selenonium and telluronium ylides was investigated with aldehydes and compared to the sulfur analogues. (2R,5R)-2,5-Dimethylselenolane was prepared and reacted as a catalyst for the benzylidenation of aldehydes. Disubstituted epoxides were readily prepared with a (surprising) absence of diastereoselectivity, and with enantiomeric excesses higher than 90%. The reaction of a tellurium analogue, (2S,5S)-2,5-diethyltellurolane, afforded the oxirane in very moderate yield and e.e.'s in the range of 62–82%. Though this was less productive, it is the first report of a chiral telluronium ylide leading to an asymmetric epoxidation of aldehydes.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

Effect of Particle Size on Electro-Optic Properties of Liquid Crystal Devices Doped with γ-Cyclodextrin Stabilized Barium Titanate Nanoparticles

Barium titanate stabilized by γ-cyclodextrin nanoparticles were prepared by using a microwave reactor equipped with ultrasonic nozzle mixing at 240°C in a tetraethylene glycol solution of barium ethoxide and titanium ethoxide in the presence of γ-cyclodextrin. Particles in γ-cyclodextrin-stabilized BaTiO₃ nanoparticles had an average diameter of 2.1 nm and mainly distributed within the range of about 1 to 4 nm. The γ-cyclodextrin-stabilized BaTiO₃ nanoparticles were mixed with 4-cyano-4′-pentylbiphenyl at room temperature resulting in a liquid crystal sol of 4-cyano-4′-pentylbiphenyl. The response time of liquid crystal devices in the presence of γ-cyclodextrin-stabilized BaTiO₃ nanoparticles was faster than that in the absence.     

Anomalous spatio-temporal chaos in a two-dimensional system of nonlocally coupled oscillators

A two-dimensional system of nonlocally coupled complex Ginzburg-Landau oscillators is investigated numerically for the first time. As previously shown for the one-dimensional case, this two-dimensional system exhibits anomalous spatio-temporal chaos characterized by power-law spatial correlations. In this chaotic regime, the amplitude difference between neighboring elements displays temporal noisy on-off intermittency. The system is also spatially intermittent in this regime, as revealed by multiscaling analysis: The amplitude field is multiaffine and the difference field is multifractal. Correspondingly, the probability distribution function of the measure defined for each field is strongly non-Gaussian, exhibiting scale-dependent deviations in the tail due to intermittency. (c) 1999 American Institute of Physics.     

Amination of ethers using chloramine-T hydrate and a copper(I) catalyst

Amination of C-H bonds activated by ether oxygen atoms is facile with chloramine-T as nitrene source and copper(I) chloride in acetonitrile as catalyst. For cyclic ethers the hemiaminal products are generally stable and can be isolated pure. For acyclic ethers, the hemiaminal products, as expected, fragment with elimination of alcohol to yield imines. When activation of benzylic positions is remote through a conjugated system, stable benzylamine derivatives are isolated. Mechanistic studies are consistent with concerted insertion of an electrophilic nitrenoid into the C-H bond in the rate-determining step, though in an asynchronous manner with a more activated substrate.