All Non-Carbon B3NO2 Exotic Heterocycles: Synthesis,Dynamics, and Catalysis

The B₃NO₂ six-membered heterocycle (1,3-dioxa-5-aza-2,4,6-triborinane=DATB), comprising three different non-carbon period 2 elements, has been recently demonstrated to be a powerful catalyst for dehydrative condensation of carboxylic acids and amines. The tedious synthesis of DATB, however, has significantly diminished its utility as a catalyst, and thus the inherent chemical properties of the ring system have remained virtually unexplored. Here, a general and facile synthetic strategy that harnesses a pyrimidine-containing scaffold for the reliable installation of boron atoms is disclosed, giving rise to a series of Pym-DATBs from inexpensive materials in a modular fashion. The identification of a soluble Pym-DATB derivative allowed for the investigation of the dynamic nature of the B₃NO₂ ring system, revealing differential ring-closing and -opening behaviors depending on the medium. Readily accessible Pym-DATBs proved their utility as efficient catalysts for dehydrative amidation with broad substrate scope and functional-group tolerance, offering a general and practical catalytic alternative to reagent-driven amidation.     

Assessing the Error Probability of the Model Selection Test

The asymptotic error probability of Linhart's model selection test isevaluated, and compared with the nominal significance level. We examine thecase where the expected discrepancies of the candidate models from the truemodel are asymptotically equal. The local alternatives method is employed inthe limiting operation of the asymptotic evaluation. Although the errorprobability under the null hypothesis is actually shown to be equal to orless than the level for most situations, intolerable violations of the errorcontrol are observed for nested models: It is often erroneously concludedthat the smaller model is significantly better than the larger model. Toprevent this violation, a modification of Linhart's test statistic isproposed. The effectiveness of the proposed test is confirmed throughtheoretical analysis and numerical simulations.     

Regularity of Harmonic Functions in Cheeger-Type Sobolev Spaces

We give a geometric approach to the study of the regularity of harmonic functions in Cheeger-type Sobolev spaces, and prove the Hölder continuity of such functions. In the proof, we give a definition of an upper curvature bound of the unit sphere of a Banach space, which seems to be of independent interest.     

Products, cones, and suspensions of spaces with the measure contraction property

This article concerns several geometric properties of metricmeasure spaces satisfying the measure contraction property (MCP),which can be considered as a generalized notion of lower Riccicurvature bounds. We prove that the MCP of spaces descends totheir products and Euclidean cones. We also show that a positivelycurved space in terms of the MCP with a maximal diameter canbe represented as the spherical suspension of some topologicalmeasure space.     

Exiguolide, a new macrolide from the marine sponge Geodia exigua

A new 20-membered macrolide designated exiguolide has been isolated from the marine sponge Geodia exigua, and its structure determined by interpretation of spectroscopic data. Exiguolide specifically inhibited fertilization of sea urchin (Hemicentrotus pulcherrimus) gametes but not embryogenesis of the fertilized egg.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

Phenomenon of labyrinth seal with low static pressure difference and large clearance

This paper discusses the straight-through type labyrinth seal. This labyrinth seal is used for axial flow fans, which h ave an outer ring at the blade tip to seal the clearance between the ring tip and the fan shroud, in order to prevent the reverse flow or leakage. These fans are used for the cooling of automobile radiators . In these cases, the labyrinth seal is used in an extremely low static pressure difference and a large clearance . A significant decrease of the leakage rate was reported even when the labyrinth seal rotated in comparatively low speed in this unique condition according to the authors’ former report. However, this phenomen on is differ ent from past research. Further more the cause of th is phenomenon has not been determined. Therefore, the internal flow was depicted with Computational Fluid Dynamics (CFD) in or der to clarify the ca use of this phenomenon. The results of CFD show that the leakage rate decreases significantly because the carry -over flow is intercepted in the expansion groove. This is the newly discovered phenomenon which occurs under the unique condition of an extremely low differential pressure. It has not been pointed out before as the reason why the rotation decreases the leakage rate.     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

Accelerated glycosylation under frozen conditions

O-Glycosylations using thiomethyl glycosides as donors were compared under both frozen and unfrozen conditions. In the presence of MeOTf as a promoter, enormous rate acceleration was observed when the glycosylation was conducted in p-xylene below its freezing point.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006