Influence of shell strength on shape transformation of micron-sized,monodisperse, hollow polymer particles

Micron-sized, monodisperse, non-spherical polymer particles with "rugby ball" and "red blood corpuscle"-like shapes were produced by seeded polymerization of the dispersion of (divinylbenzene/vinylbiphenyl/xylene)-swollen polystyrene particles prepared by utilizing the dynamic swelling method which the authors proposed in 1991. Their non-spherical shapes were based on buckling of the shell of the resultant hollow particles. In this article, the reversible shape transformation of the hollow composite polymer particle between spherical and such non-spherical shapes was studied in detail by controlling the shell strength. A part of the shell was buckled by external pressure which was caused by evaporation of xylene from the hollow when the shell had the tensile modulus below the critical value calculated from the pressure-buckling relationship of a spherical shell proposed by Uemura. The plasticization of the shell by a good solvent was one of key factors for the shape transformation.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Effect of cationic surfactant on the formation of ferron complexes

In the spectrophotometric determination of aluminium and iron with ferron (7-iodo-8-quinolinol-5-sulphonic acid, H(2)L), the addition of cationic surfactants greatly improves the linearity of the calibration curve and widens the useful pH range. The effect of cetyltrimethylammonium chloride (CTMAC) on the stepwise stability constants (K(1),K(2) and K(3)) of the ferron complexes of aluminium and iron (ML(+), ML(-)(2) and ML(3-)(3)) and on the acid-dissociation constants (K(a1) and K(a2)) of ferron has been studied in connection with the role of the surfactant. CTMAC greatly increases the value of K(3) while exerting little effect on K(1) and K(2), thus rendering ML(3-)(3) the predominant species even at very low concentration of free L(2-). It also has some effect on the acid-dissociation constants of ferron, but sometimes it acts to decrease the free L(2-) concentration. At is therefore concluded that the improvements due to addition of surfactant should be attributed to the increased K(3) value. The presence of surfactant micelles is not essential, because the surfactant has a favourable effect when present at well below its critical micelle concentration, and because the continuous variations plots show a peak at a point corresponding to the composition M: L: Q (Q = cationic surfactant) = 1:3:3.     

Regioselectivity in palladium-indium iodide-mediated allylation reaction of glyoxylic oxime ether and N-sulfonylimine

Allylation reaction of electron-deficient imines with allylic alcohol derivatives in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide was studied. The reversibility of allylation was observed in the reaction of glyoxylic oxime ether having camphorsultam. As the important effect of water on regioselectivity, the gamma-adducts were kinetically formed from monosubstituted allylic reagents in the presence of water. The selective formation of thermodynamically stable alpha-adducts was observed in anhydrous THF. In contrast, the allylation of N-sulfonylimine gave the gamma-adducts with high regioselectivities even under anhydrous reaction conditions.     

Surface diffusion in reversed-phase liquid chromatography using silica gels bonded with C1 and C18 ligands of different densities

Surface diffusion in reversed-phase liquid chromatography (RPLC) using silica gels bonded with C₁ and C₁₈ alkyl ligands of different densities was studied from the viewpoints of two extrathermodynamic relationships, i.e., enthalpy-entropy compensation (EEC) and linear free energy relationship (LFER). First, according to the four methods proposed by Krug et al., the values of surface diffusion coefficient (D_s) were analyzed to confirm that an actual EEC resulting from substantial physico-chemical effects takes place for surface diffusion. Then, it was also demonstrated that a LFER is observed between surface diffusion and the retention equilibrium. The establishment of EEC and LFER suggests a mechanistic similarity of molecular migration by surface diffusion, irrespective of the alkyl chain length and the densities of C₁ and C₁₈ ligands. Finally, a thermodynamic model for the LFER based on the real EEC was used to estimate D_s values under various RPLC conditions. The D_s values can be estimated with a mean square deviation of about 25–30%. The agreement between the D_s values estimated and those experimentally measured suggests that the total mass flux by surface diffusion consists of the two contributions due to C₁ and C₁₈ ligands and that the contribution of each ligand is proportional to the ligand density.     

Asymmetric synthesis of alpha-amino acids: indium-mediated reactions of glyoxylic oxime ether in aqueous media

The indium-mediated allylation and alkylation reactions of the Oppolzer camphorsultam derivative of glyoxylic oxime ether proceeded with excellent diastereoselectivity in aqueous media, providing a variety of enantiomerically pure alpha-amino acids.     

Total synthesis of cis-solamin and its inhibitory action with bovine heart mitochondrial complex I

A convergent total synthesis of cis-solamin (1a) and its diastereomer (1b) was accomplished. A key reaction of this approach was the use of VO(acac)₂-catalyzed diastereoselective epoxidation of (Z)-bis-homoallylic alcohol 3 followed by spontaneous cyclization for the cis-THF ring formation. By comparison of the optical rotation of the two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a. Inhibitory action of synthetic 1a and 1b with bovine heart mitochondrial complex I are reported.