Determination of thermal-expansion characteristics of metals using strain gages

A method has been developed to measure thermal-expansion characteristics of metals using bonded resistance strain gages. The method allows rapid and accurate determination of expansion properties at similar or lower cost (depending on the particular application) than conventional dilatometric techniques. Other advantages include elimination of a need for perfectly flat sample material, elimination of specimen machining, and applicability to structures and components. To utilize this technique, the ‘apparent strain’ of the gage is determined by attaching it to a ‘standard’ material for which the thermal-expansion characteristics are accurately known and subtracting the known thermal response of the material from the total gage output. ‘Apparent strain’ is therefore the temperature-induced output of the gage when bonded to a material having a thermal-expansion coefficient of zero. When the gage is then attached to a test material and cycled through the same temperature range, this ‘apparent strain’ is subtracted from the total gage output to obtain the actual unit-length change of the test material. Using this technique, mean-expansion coefficients of experimental alloys were determined over the temperature range ?320°F (?196°C) to room temperature.     

Two new eudesmane derivatives from Verbesina virginica

<正>Two new eudesmane derivatives were isolated from the leaves and flowers of Verbesina virginica,along with the known 6-O-β-E -p-coumaroyl-4α-hydroxyeudesmane(1).Their structures were determined as 6-O-β-Z-p-coumaroyl-4α-hydroxyeudesmane(2) and 6-O-α-E-p-coumaroyl-1β-4α-dihydroxyeudesmane(3) by spectroscopic methods.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

PRESSURE-VELOCITY EQUILIBRIUM HYDRODYNAMIC MODELS

This article describes mathematical models for phase separated mixtures of materials that are in pressure and velocity equilibrium but not necessarily temperature equilibrium. General conditions for constitutive models for such mixtures that exhibit a single mixture sound speed are discussed and specific examples are described.     

Structure of the B4 liquid crystal phase near a glass surface

The B4 liquid crystal phase of bent-core molecules, a smectic phase of helical nanofilaments, is one of the most complex hierarchical self-assemblies in soft materials. We describe the layer topology of the B4 phase of mesogens in the P-n-OPIMB homologous series near the liquid crystal/glass interface. Freeze-fracture transmission electron microscopy reveals that the twisted layer structure of the bulk is suppressed, the layers instead forming a structure with periodic layer undulations, with the topography depending on the distance from the glass. The surface layer structure is modeled as parabolic focal conic arrays generated by equidistant parabolas whose foci are defect lines along the glass surface. Nucleation and growth of toric focal conics near the glass substrate is also observed. Although the growth of twisted nanofilaments, the usual manifestation of structural chirality in the B4 phase, is suppressed near the surface, the smectic layers are intrinsically chiral, and the helical filaments that form on top of them grow with specific handedness.     

Simultaneous determination of dimethoate and its metabolite omethoate in curry leaf using LC-MS/MS and risk assessment

This study presents the method development, validation, and simultaneous determination of dimethoate and its metabolite omethoate in curry leaf. Samples were extracted following modified quick, easy, cheap, effective, rugged, and safe extraction protocol and analyzed using liquid chromatography-tandem mass spectrometry. The limit of quantification in the matrix was 0.005 μg g⁻¹ for dimethoate and omethoate. Extraction using acetonitrile recorded the average recoveries in the range of 82.25 to 112.97% for dimethoate and 85.57 to 107.22% for omethoate at 0.005, 0.025 and 0.050 μg g⁻¹ fortification levels and relative standard deviation less than 5%. Similarly, the relative standard deviation values for intraday (Repeatability) and interday (Reproducibility) tests were less than 15%. Dissipation kinetics of dimethoate 30% emulsifiable concentrate at 200 and 400 g a.i h⁻¹ recorded initial deposits of 5.20 and 10.05 μg g⁻¹ and 0.33 and 0.48 μg g⁻¹ for dimethoate and omethoate, respectively, and half-life of 3.07 and 3.34 days. The estimated hazard index value found more than one at a day after dimethoate application. It is not safe for consumer health to use curry leaves in the initial days after application.