An efficient edge based data structure for the compressible Reynolds-averaged Navier–Stokes equations on hybrid unstructured meshes

An efficient edge based data structure has been developed in order to implement an unstructured vertex based finite volume algorithm for the Reynolds-averaged Navier–Stokes equations on hybrid meshes. In the present approach, the data structure is tailored to meet the requirements of the vertex based algorithm by considering data access patterns and cache efficiency. The required data are packed and allocated in a way that they are close to each other in the physical memory. Therefore, the proposed data structure increases cache performance and improves computation time. As a result, the explicit flow solver indicates a significant speed up compared to other open-source solvers in terms of CPU time. A fully implicit version has also been implemented based on the PETSc library in order to improve the robustness of the algorithm. The resulting algebraic equations due to the compressible Navier–Stokes and the one equation Spalart–Allmaras turbulence equations are solved in a monolithic manner using the restricted additive Schwarz preconditioner combined with the FGMRES Krylov subspace algorithm. In order to further improve the computational accuracy, the multiscale metric based anisotropic mesh refinement library PyAMG is used for mesh adaptation. The numerical algorithm is validated for the classical benchmark problems such as the transonic turbulent flow around a supercritical RAE2822 airfoil and DLR-F6 wing-body-nacelle-pylon configuration. The efficiency of the data structure is demonstrated by achieving up to an order of magnitude speed up in CPU times.     

Thermal performances and stabilities of nanofluids in an electrical oil heater

Journal of Thermal Analysis and Calorimetry - In this study, different nanofluids synthesized with aluminium oxide (alumina) and titanium dioxide in mass ratios of 1%, 3%, and 5% were tested in an...     

Suzuki cross-coupling reaction of aryl halides with arylboronic acids catalysed by Pd(II)-NaY zeolite

Pd(II)-exchanged NaY zeolite showed high activity in the Suzuki cross-coupling reactions of aryl bromides and iodides without added ligands. The DMF:water ratio, and the type and amount of base were found to be critical for the efficiency of the reaction. The catalyst is reusable after regeneration.     

SOME SUBGROUPS OF THE EXTENDED HECKE GROUPS (λ_q)

The authors consider the extended Hecke groups H(λq) generated by T(z) = -1 / z, S(z) = -1/(z + λq,) and R(z) = 1 / z with A, = 2 cos(π/q) for q≥3 an integer. In this paper, the even subgroup He(λq), the second commutator subgroup H (λq) and the principal congruence subgroups Hp(λq) of the extended Hecke groups H(λq) are studied. Also, relations between them are given.     

Quantitative analysis of sea-bed sediments from Eastern Black Sea by EDXRF spectrometry

Sea-bed sediments from Eastern Black Sea have been analyzed for their Fe, Ba and Sr contents using the methods of standard addition and energy dispersive X-ray fluorescence (EDXRF). Samples were prepared from powder sifted by a 200 mesh sieve. An annular 100 mCi²⁴¹Am radioactive source emitting 59.543 keV photons was used for excitation and a Ge(Li) detector, which has a 190 eV FWHM for 5.9 keV photons was used for intensity measurements. 2048 channels of the MCA are employed for 20 or 30 min. Dried and ground sea-bed sediments are found to contain 2.95–7.50% Fe, 0.032–0.268% Ba and about 73–273 ppm Sr. These results agree with those obtained via atomic absorption methods.     

Selective pre-concentration of selenite from aqueous samples using mercapto-silica

Silica gel modified with 3-mercaptopropyl-trimethoxysilane was used for the selective separation and pre-concentration of selenite (Se(IV)) from aqueous solutions containing Se(IV) and selenate (Se(VI)). Over a wide range of acidity, from 2 mol l⁻¹ HCl to pH 9.00, Se(IV) was taken up by the mercaptopropyl-silica with nearly 100% efficiency; Se(VI) however was unretained. Se(IV) content was determined by hydride generation atomic absorption spectrometry (HGAAS), following batch release of the selenium from the pre-concentration medium by acidic periodate. The overall pre-concentration efficiency, including both take-up and elution, in the range of 89-106%. The method was applied to spiked seawater samples containing as low as 800 ng l⁻¹ Se in selenite form. This solid-phase extraction system offers several major advantages over conventional solvent extraction procedures. It firstly exhibits high selectivity for Se(IV) over Se(VI). Using the solid-phase media, pre-concentration of Se(IV) in dilute water samples can be carried out in the field, stabilizing the selenite-selenium in a convenient form for transport and storage. In addition, selenium stored on silica is derived solely from Se(IV) overcoming problems of selenium redox speciation changes and loss during storage.     

Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

Synthesis of persulfate containing poly (N-vinyl-2-pyrrolidone) (PVP) hydrogels in aqueous solutions by γ-induced radiation

The effect of ⁶⁰Co γ-irradiation on aqueous solutions of poly(N-vinyl-2-pyrrolidone) (PVP) in the presence of persulfate anion has been investigated. The gelation dose of PVP and persulfate containing PVP aqueous solutions has been determined. At low concentrations of persulfate (1.00–3.50%), gelation percentages exhibited a decreasing trend by increasing persulfate content in aqueous solutions of the polymer. The gelation doses of persulfate containing polymer solutions were calculated by the Charlesby–Pinner equation. It was observed that the gelation dose values were shifted to higher values by increasing persulfate concentration in solution. The ratio of the chain scission and crosslinking yields (G(s)/G(x)) was also determined. The results showed that the G(s)/G(x) ratios were smaller than one for PVP aqueous solution system, whereas those obtained for persulfate containing PVP aqueous solutions were higher than unity. The results implied that the chain scission of polymer is more effective than crosslinking in the presence of persulfate. Mechanism of the crosslinking and/or degradation and structure–property relationship of PVP and PVP/persulfate hydrogel systems were investigated by Fourier transformation infeared and thermal analysis (differential scanning calorimetry, thermal gravimetric analysis and differential thermai analysis) methods.     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.