CuAl2O4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation

Nanocrystalline spinel CuAl₂O₄ powders were prepared by sol-gel method from nitrate Cu(NO₃)₂·3H₂O, Al(NO₃)₃·9H₂O and complex C₆H₈O₇·H₂O. Sintering was carried out at 400, 500, 600, 700, 800°C respectively for 2 h in air. The XRD patterns started to appear CuAl₂O₄ peaks after sintering of 500°C and consist of only CuAl₂O₄ peaks as spinel crystal after sintering of 700°C. The powders were analyzed by TEM and UV-vis diffuse reflectance spectrum to be round, about 10–30 nm in size and Eg=1.77 eV. Photodegradation property of nanocrystalline CuAl₂O₄ powders was investigated by using methyl orange as model pollutant and mercury lamp (λ>400 nm) as energy source. The results indicated that CuAl₂O₄ powders sintered at 700°C had the excellent visible photocatalytic property. Under the irradiation of visible light, methyl orange could be degraded 97% in 120 min.     

A maximum-efficiency-first multi-path route selection strategy for optical burst switching networks

In this paper, the impact of a path selection on other existing paths in optical burst switching (OBS) networks is studied by analyzing the contention among different traffic streams and the interaction between the route selection and traffic load balance. The results show that there exists a mutual reinforcement interaction among the traffic load of a path, the path burst loss ratio and the contention ability of the path when burst loss ratio based multi-path selection strategies are adopted, which may increase the unbalance of traffic and lead to severe congestion further. A maximum-efficiency-first multi-path selection strategy, which considers the performance of the burst flows and the impact of a path selection on existing OBS paths at the same time by a combined metric of route efficiency, is proposed to maximize the utility of the burst flows and minimize the increment of lost throughput on the path. The performance of the proposed multi-path selection strategy is evaluated through simulation. The results show that the presented strategy obviously outperforms the least burst loss ratio strategy and shortest path first strategy in terms of the burst loss ratio in the practical unbalanced background traffic, especially when the network is heavily loaded.     

GC-MS法快速测定食品接触材料油墨中16种多环芳烃

以正己烷超声提取,弗罗里硅土固相萃取柱净化,以正己烷-二氯甲烷溶液(体积比1:1)洗脱,用GC-MS联用仪SIM模式外标法定量测定食品接触材料油墨中16种多环芳烃.在优化条件下,16种多环芳烃的浓度在0.1～4.0 μg/mL范围内与色谱峰面积呈良好的线性关系,线性相关系数大于0.995,检出限为0.12～3.24 ng/L.加标回收率为77.24％～ 104.76％,测定结果的相对标准偏差为1.05％～1.69％(n=6).该方法适用于食品接触材料油墨中PAHs的日常检测.     

Co3O4纳米片的制备及对H2O2电还原反应的催化性能简

通过恒电势电沉积和加热处理在泡沫镍基体上制备了Co3O4纳米片. 利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和X射线光电子能谱(XPS)等手段对纳米片的形貌和结构进行了表征. 采用线性伏安扫描和计时电流技术研究了Co3O4纳米片电极对H2O2的电还原性能. 结果表明,在3.0 mol/L KOH 和 0.4 mol/L H2O2溶液中,当电压为-0.4 V(vs. Ag/AgCl)时,线性伏安扫描电流密度达到-0.386 A/cm2,在1000 s 测试时间内,计时电流密度衰减很小,表明Co3O4纳米片电极对H2O2具有很高的活性和稳定性.     

光化学柱后衍生–高效液相色谱法测定婴幼儿营养米粉中的黄曲霉毒素B1

建立婴幼儿营养米粉中黄曲霉毒素B1的高效液相色谱荧光检测器测定方法。样品以甲醇–水(体积比70∶30)溶液匀质提取,过黄曲霉毒素B1免疫层析亲和柱净化,经CNW Athena C18色谱柱分离和光化学柱后衍生反应器衍生后,用带有荧光检测器的高效液相色谱仪测定。采用峰面积外标法定量黄曲霉毒素B1含量。黄曲霉毒素B1在0～10μg/L的浓度范围内线性关系良好,相关系数为0.999 8,检出限为0.25μg/kg。在3个添加水平下加标回收率为97.7%～106.9%,测定结果的相对标准偏差为1.7%(n=6)。该方法的灵敏度、准确度、精密度均符合黄曲霉毒素B1的检测技术要求,适用于婴幼儿营养米粉中黄曲霉毒素B1的日常检测。     

含二茂铁基荧光探针对H2S的识别

以乙酰二茂铁和蒽醛为原料,合成了一种新的反应型荧光探针1-二茂铁基-3-(9-蒽基)丙烯酮,经1H NM R,13C NM R,IR,LC-M S等手段表征确证。基于Michael加成引起的电子转移机制,利用硫化氢的强亲核性,以荧光滴定法考察了该化合物在生理条件下对硫化氢的识别作用,得出其最佳识别时间为50 min,最佳识别浓度为50μmol/L,且多数离子不会对其识别作用产生干扰。这种能稳定检测的,具有高选择性、高灵敏度的反应型荧光探针化合物,可用于生物医药领域。     

带宽调制型单光纤光栅温变无补偿位移传感

报道了利用反射谱带宽调制和光强差分探测技术实现单一光纤光栅温变无补偿位移精确测量的新方法。设计了一种结构新颖的曲臂梁位移传感装置,结合光波导理论与材料力学原理分析了光纤光栅在高斯应变作用下光栅反射谱侧向梯度展宽的成因,理论推导了特殊结构梁在外力作用下光栅反射谱带宽/反射光强与压力之间的响应关系。光栅反射谱侧向梯度展宽的同时反射光强线性增加,利用光强差分检测方法消除光源出光抖动的影响,提高了位移测量精度。基于带宽调制的光纤光栅位移传感方法免受温度变化的影响,在-10℃~80℃的温度变化范围内,测量误差小于1.2%,实现了单光纤光栅温变无补偿位移测量。     

High-efficiency fourth-harmonic generation of KBBF crystal

A prism-coupled technique (PCT) was introduced in the SHG experiment of KBe₂BO₃F₂ (KBBF) crystal. 266-nm ultraviolet energy of 0.28 mJ was obtained by using this method in a KBBF crystal at the input energy of 2.6 mJ, corresponding to a conversion efficiency of 10.8%.     

吡喃盐化合物的合成及应用研究进展

吡喃盐是一类具有独特化学反应活性和光物理性质的杂环化合物,在有机合成、生物传感和光电材料等许多领域展现了良好的应用前景.结合本课题组的研究成果,综述了α-非活性吡喃盐和α-活性吡喃盐化合物的合成研究进展,并介绍了一些典型吡喃盐化合物在有机合成、光敏剂、离子液体和荧光传感材料等领域的应用.     

An unprecedented vanadoniobate cluster with 'trans-vanadium' bicapped Keggin-type {VNb12O40(VO)2}

The first organic-inorganic hybrid vanadoniobate cluster compounds with a bicapped Keggin-type {VNb(12)O(40)(VO)(2)} core have been synthesized and characterized.