Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Electropolymerized coatings of poly(o‐anisidine) and poly(o‐anisidine)‐TiO2 nanocomposite on aluminum alloy 3004 by using the galvanostatic method and their corrosion protection performance

Poly(o‐anisidine) (POA) and poly(o‐anisidine)‐TiO₂ (POA‐TiO₂) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT ‐ IR spectroscopy, XRD, SEM ‐ EDX and SEM. The corrosion protection performance of POA and POA‐TiO₂ nanocomposite coatings was investigated in the 3.5% NaCl solution by using potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results show that the corrosion rate of the nanocomposite coatings is about 900 times lower than the bare AA3004 under optimal conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical solutions based on Chebyshev collocation method for singularly perturbed delay parabolic PDEs

The main purpose of this work is to provide a numerical approach for the delay partial differential equations based on a spectral collocation approach. In this research, a rigorous error analysis for the proposed method is provided. The effectiveness of this approach is illustrated by numerical experiments on two delay partial differential equations. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous sensing of L-tyrosine and epinephrine using a glassy carbon electrode modified with nafion and CeO2 nanoparticles

An electrochemical sensor was developed and tested for detection of L-tyrosine in the presence of epinephrine by surface modification of a glassy carbon electrode (GCE) with Nafion and cerium dioxide nanoparticles. Fabrication parameters of a surfactant-assisted precipitation method were optimized to produce 2–3 nm CeO₂ nanoparticles with very high surface-to-volume ratio. The resulting nanocrystals were characterized structurally and morphologically by X-ray diffractometery (XRD), scanning and high resolution transmission electron microscopy (SEM and HR-TEM). The nanopowder is sonochemically dispersed in a Nafion solution which is then used to modify the surface of a GCE electrode. The electrochemical activity of L-tyrosine and epinephrine was investigated using both a Nafion-CeO₂ coated and a bare GCE. The modified electrode exhibits a significant electrochemical oxidation effect of L-tyrosine in a 0.2 M Britton-Robinson (B-R) buffer solution of pH 2. The electro-oxidation peak current increases linearly with the L-tyrosine concentration in the molar concentration range of 2 to 160 μM. By employing differential pulse voltammetry (DPV) for simultaneous measurements, we detected two reproducible peaks for L-tyrosine and epinephrine in the same solution with a peak separation of about 443 mV. The detection limit of the sensor (signal to noise ratio of 3) for L-tyrosine is ~90 nM and the sensitivity is 0.20 μA μM^?1, while for epinephrine these values are ~60 nM and 0.19 μA μM^?1. The sensor exhibited excellent selectivity, sensitivity, reproducibility and stability as well as a very good recovery time in real human blood serum samples.

Simultaneous electrochemical determination of L-tyrosine and epinephrine in blood plasma with Nafion-CeO₂/GCE modified electrode showing a 443 mV peak-to-peak potential difference between species oxidation peak currents.     

Separation of γ-linolenic and other polyunsaturated fatty acids from Boraginaceae via supercritical CO2

Essential fatty acids were extracted from Echium amoenum (Boraginaceae) seed oil via supercritical carbon dioxide and the results were compared with conventional Soxhlet method as the base case of 100% recovery. The response surface methodology was used to optimize the effective extraction parameters. The chemical composition of recovered oil was analyzed by polar and non-polar gas chromatograph-flame ionization detector columns. The experimental results indicated that echium seed contained 25 wt% oil and the maximum extraction oil recovery of 92% was obtained via supercritical CO(2) at optimal operating conditions (43°C, 280 bar, 1.5 mL/min, 25 min static time and 130 min dynamic time). At similar operating conditions, applying 2.5 and 5 mol% ethanol as a modifier enhanced the recovery to 96 and 112%, respectively. The results showed that supercritical fluid extraction is a viable technique for separation of constituents such as γ-linolenic acid (7-8%), palmitic acid (6-7%), stearic acid (3-4%), oleic acid (12-13%), linoleic acid (19-20%), α-linolenic acid (40-41%) and stearidonic acid (8-9%) from Boraginaceae.     

Comparative electrochemical study of new self-assembled monolayers of 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol and 2-{[(2-sulfanylphenyl)imino]methyl}phenol for determination of dopamine in the presence of high concentration of ascorbic acid and uric acid

The comparative electrochemical behavior of self-assembled monolayers of two Schiff's bases, 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol (FMAB) and 2-{[(2-sulfanylphenyl)imino]methyl}phenol (SIMP) on a bare gold electrode (Au FMAB SAM-modified electrode and Au SIMP SAM-modified electrode, respectively), was investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy in a 0.1 mol L(-1) KCl solution that contains 5.0 × 10(-3) mol L(-1) [Fe(CN)(6)](3-/4-). The results revealed that the modified electrodes showed an electrocatalytic activity toward the anodic oxidation of dopamine by a marked enhancement in the current response and lower overpotential (60 and 90 mV for the Au FMAB and Au SIMP SAM-modified electrodes, respectively) in phosphate buffer solution at pH 6.0. The Au SIMP SAM-modified electrode was applied successfully to the determination of dopamine in the presence of a high concentration of ascorbic acid. Selective detection was realized in total elimination of ascorbic acid response-a method different from the ones based on the potential separations. The detection limit of dopamine was 5.0 × 10(-8) mol L(-1) in a linear range from 1.0 × 10(-6) to 1.2 × 10(-4) mol L(-1) in the presence of 1.0 × 10(-3) mol L(-1) ascorbic acid. The interference studies also showed that the Au SIMP SAM-modified electrode exhibited good selectivity in the presence of a large excess of uric acid and could be employed for the determination of dopamine in pharmaceutical formulations, plasma samples and human urine with adequate selectivity and precision.     

Three-dimensional Pd/Pt bimetallic nanodendrites on a highly porous copper foam fiber for headspace solid-phase microextraction of BTEX prior to their quantification by GC-FID

The preparation of bimetallic Pd/Pt nanofoam for use in fiber based solid-phase microextraction (SPME) is described. First, a highly porous copper foam was prepared on the surface of an unbreakable copper wire by an electrochemical method. Then, the substrate was covered with metallic Pd and Pt using galvanic replacement of the Cu nanofoam substrate by applying a mixture of Pd(II) and Pt(IV) ions. The procedure provided an efficient route to modify Pd/Pt nanofoams with large specific surface and low loading with expensive noble metals. The fiber was applied to headspace SPME of benzene, toluene, ethylbenzene and xylene (BTEX) (as the model compounds) in various spiked water and wastewater samples. It was followed by gas chromatography-flame ionization detection (GC-FID). A Plackett-Burman design was performed for screening the experimental factors prior to Box-Behnken design. Compared with the commercial PDMS SPME fiber (100 μm), it had higher extraction efficiency for BTEX. Under the optimum conditions, the method has low limits of detection (0.16–0.35 μg L^?1), a wide linear range (1–200 μg L^?1), relative standard deviations between 5.8 and 10.5%, and good recoveries (>85% from spiked samples).

Open image in new window

Graphical abstract Schematic presentation of a three-dimensional Pd/Pt bimetallic nanodendrites supported on a highly porous copper foam fiber for use in headspace solid phase microextraction of BTEX. They were then quantified by gas chromatography–flame ionization detector.

     

Electrochemical Determination of Tyrosine in the Presence of Dopamine and Uric Acid at the Surface of Gold Nanoparticles Modified Carbon Paste Electrode

A gold nanoparticles modified carbon paste electrode (GN‐CPE) was used as a highly sensitive electrochemical sensor for determination of tyrosine (Tyr), dopamine (DA) and uric acid (UA) in phosphate buffer solution (PBS). The study and measurements were carried out by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry methods. In DPV, the GN‐CPE could separate the oxidation peak potentials of DA and UA present in the same solution, though at the unmodified CPE the peak potentials were indistinguishable. The prepared electrode showed voltammetric responses with high sensitivity and selectivity for Tyr, DA and UA in optimal conditions, which makes it very suitable for simultaneous determination of these compounds. The calibration curves for Try, DA and UA were linear for the concentrations of each species. The proposed voltammetric approach was also applied to the determination of Tyr concentration in human serum as a real sample.