Micowave assisted synthesis of benzo‐substituted macrocyclic diamides and their corresponding macrocyclic dithiodiamides

A synthesis of a series of macrocyclic diamides 3 in good yields by reacting the corresponding bis phenols 4 with the appropriate dihalo alkanes 6 either in solvent or in dry media under microwave irradiation. Thiation of 3 with P₂S₅ or Lawesson's reagent in solvent free conditions under microwave irradiation is also described.     

Solvent dependence of the 2-naphthyl(carbomethoxy)carbene singlet-triplet energy gap

The solvent dependence of the 2-naphthyl(carbomethoxy)carbene (2) singlet-triplet energy gap has been examined by time-resolved infrared (TRIR) and computational methods. The ground state of 2 changes from the triplet state in hexane to the singlet state in acetonitrile. Preferential stabilization of the singlet carbene is the result of its increased dipole moment in polar solvents. Variable-temperature TRIR experiments provide measurements of the enthalpic and entropic differences between (1)2 and (3)2 and suggest that solvent and geometry effects on the entropy of singlet and triplet carbenes can offset differences arising from spin multiplicity. B3LYP calculations using the polarizable continuum solvation model (PCM) reproduce the general trends in enthalpic differences seen experimentally.     

Computational study of the halogen atom-benzene complexes

The structures of halogen atom-benzene complexes were investigated by modern DFT and ab initio computational methods. The spectroscopic properties of the complexes are also predicted and are in good agreement with experiment where such data have been reported. The fluorine atom-benzene complex is predicted to be a sigma complex due to the strength of a C-F bond. The chlorine atom-benzene complex is predicted to have an eta(1) pi complex structure, which is only slightly more favorable (1.1 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than a sigma complex but is significantly more stable (4.4 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than the eta(6) pi complex. The bromine and iodine benzene complexes are also predicted to prefer an eta(1) pi complex structure.     

Synthesis and spectroscopic studies of methoxy-substituted phenylthienylnicotinamidines

Abstract

Five thienylnicotinamidine derivatives 5a–e were prepared from their corresponding nicotinonitriles 3a–e on treatment with lithium trimethylsilylamide [LiN(TMS)₂] followed by hydrolysis using ethanolic/HCl (gas). The nicotinonitriles 3a–e were prepared via Suzuki coupling reaction of bromothienyl derivative 1 with the appropriate phenylboronic acids 2a–e. The DFT calculation was used to optimize the geometric structure of the newly synthesized nicotinamidines. The comparison of DFT/B3LYP calculated spectral data (¹H-NMR and ¹³C-NMR) with the experimental data showed acceptable agreement. Mass fragmentation patterns of 3,4-dimethoxyphenyl, 3,5-dimethoxyphenyl, and 3,4,5-trimethoxyphenyl thienylnicotinamidine derivatives were investigated.     

Superoxide radical anion adduct of 5,5-dimethyl-1-pyrroline N-oxide (DMPO). 2. The thermodynamics of decay and EPR spectral properties

The formation of the superoxide radical anion (O2*-) adduct of the nitrone 5,5-dimethyl-1-pyrroline N-oxide (DMPO) as detected by electron paramagnetic resonance (EPR) spectroscopy is one of the most common techniques for O2*- detection in chemical and biological systems. However, the nature of DMPO-O2H has confounded spin-trapping investigators over the years, since there has been no independently synthesized DMPO-O2H to date. A density functional theory (DFT) approach was used to predict the isotropic hyperfine coupling constants arising from the N, beta-H, and gamma-H nuclei of DMPO-O2H using explicit interactions with water molecules as well as via a bulk dielectric effect employing the polarizable continuum model (PCM). Theoretical calculation on the thermodynamics of DMPO-O2H decay shows favorable intramolecular rearrangement to form a nitrosoaldehyde and a hydroxyl radical as products, consistent with experimental observations. Some pathways for the bimolecular decomposition of DMPO-O2H and DMPO-OH have also been computed.     

The direct detection of an aryl azide excited state: an ultrafast study of the photochemistry of para- and ortho-biphenyl azide

Ultrafast laser flash photolysis (266 nm) of para- and ortho-biphenyl azide in acetonitrile produces azide excited states that have broad absorption bands centered at 480 nm. The para-biphenyl azide excited singlet state has a lifetime of 100 fs. The excited-state lifetime of the ortho-azide isomer is 450 +/- 150 fs. Decay of the azide excited states is accompanied by the formation of the corresponding known singlet nitrenes (para, lambdamax = 350 nm, ortho, lambdamax = 400 nm). Singlet para-biphenylnitrene is born with excess energy and undergoes vibrational cooling with a time constant of 11 ps to form the long-lived (tau approximately 9 ns) relaxed singlet nitrene. Singlet ortho-biphenylnitrene decays with a lifetime of 16 ps in acetonitrile at ambient temperature.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

Theoretical study of the spin trapping of hydroxyl radical by cyclic nitrones: a density functional theory approach

The hydroxyl radical (*OH) is an important mediator of biological oxidative stress, and this has stimulated interest in its detection. 5,5-Dimethyl-1-pyrroline N-oxide (DMPO) and its alkoxycarbonyl and alkoxyphosphoryl analogues have been employed as spin traps for electron paramagnetic resonance (EPR) spectroscopic radical detection. Energies of optimized geometries of nitrones and their corresponding *OH adducts were calculated using density functional theory (DFT) at the B3LYP/6-31+G//B3LYP/6-31G level. Calculations predict that the trans adduct formation is favored in alkoxycarbonyl nitrones, while cis adducts with intramolecular H-bonding is favored for alkoxyphosphoryl nitrones. Addition of *OH to a phosphoryl-substituted nitrone is more exoergic than the carbonylated nitrones. Charge and spin densities on the nitrone spin traps were correlated with their rates of addition with *OH, and results show that the charge density on the nitronyl C, the site of *OH addition, is more positive in phosphorylated nitrones compared to DMPO and the alkoxycarbonyl nitrones. The dihedral angle between the beta-H and nitroxyl O bonds is smaller in phosphorylated nitrones, and that aspect appears to account for the longer half-lives of the spin adducts compared to those in DMPO and alkoxycarbonyl nitrones. Structures of nitrones with trifluoromethyl-, trifluoromethylcarbonyl-, methylsulfonyl-, trifluoromethylsulfonyl-, amido-, spiropentyl-, and spiroester substituents were optimized and their energies compared. Amido and spiroester nitrones were predicted to be the most suitable nitrones for spin trapping of *OH due to the similarity of their thermodynamic and electronic properties to those of alkoxyphosphoryl nitrones. Moreover, dimethoxyphosphoryl substitution at C-5 was found to be the most efficient substitution site for spin trapping of *OH, and their spin adducts are predicted to be the most stable of all of the isomeric forms.     

A comparison of acetyl- and methoxycarbonylnitrenes by computational methods and a laser flash photolysis study of benzoylnitrene

Density functional theory (DFT), CCSD(T), and CBS-QB3 calculations were performed to understand the chemical and reactivity differences between acetylnitrene (CH(3)C(=O)N) and methoxycarbonylnitrene (CH(3)OC(=O)N) and related compounds. CBS-QB3 theory alone correctly predicts that acetylnitrene has a singlet ground state. We agree with previous studies that there is a substantial N-O interaction in singlet acetylnitrene and find a corresponding but weaker interaction in methoxycarbonylnitrene. Methoxycarbonylnitrene has a triplet ground state because the oxygen atom stabilizes the triplet state of the carbonyl nitrene more than the corresponding singlet state. The oxygen atom also stabilizes the transition state of the Curtius rearrangement and accelerates the isomerization of methoxycarbonylnitrene relative to acetylnitrene. Acetyl azide is calculated to decompose by concerted migration of the methyl group along with nitrogen extrusion; the free energy of activation for this concerted process is only 27 kcal/mol, and a free nitrene is not produced upon pyrolysis of acetyl azide. Methoxycarbonyl azide, on the other hand, does have a preference for stepwise Curtius rearrangement via the free nitrene. The bimolecular reactions of acetylnitrene and methoxycarbonylnitrene with propane, ethylene, and methanol were calculated and found to have enthalpic barriers that are near zero and free energy barriers that are controlled by entropy. These predictions were tested by laser flash photolysis studies of benzoyl azide. The absolute bimolecular reaction rate constants of benzoylnitrene were measured with the following substrates: acetonitrile (k = 3.4 x 10(5) M(-1) (s-1)), methanol (6.5 x 10(6) M(-1) s(-1)), water (4.0 x 10(6) M(-1) s(-1)), cyclohexane (1.8 x 10(5) M(-1) s(-1)), and several representative alkenes. The activation energy for the reaction of benzoylnitrene with 1-hexene is -0.06 +/- 0.001 kcal/mol. The activation energy for the decay of benzoylnitrene in pentane is -3.20 +/- 0.02 kcal/mol. The latter results indicate that the rates of reactions of benzoylnitrene are controlled by entropic factors in a manner reminiscent of singlet carbene processes.