Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.     

Molecular structures and magnetic properties of the mixed-ligand complexes of bis(hexafluoroacetylacetonato)manganese(II), -copper(II), and -zinc(II) with 4,4'-bis(N-tert-butyl-N-oxylamino)-2,2'-bipyridine. Isosceles triangular hetero-three-spin systems consisting of aminoxyls and metal ions

4,4'-Bis(N-tert-butyloxylamino)-2,2'-bipyridine (4) and its 1:1 complexes with bis(hexafluoroacetylacetonato)manganese(II), -copper(II), and -zinc(II) were prepared. An X-ray structure analysis of free ligand 4 reveals that the molecule has a trans conformation with Ci symmetry and the aminoxyl radical center has a short contact of 2.36 A with one of the neighboring molecules. The three 1:1 complexes have mutually similar molecular structures in which the 2,2'-bipyridine moiety has a cis conformation and serves as a bidentate ligand and coordination geometry around the metal atom is a distorted octahedron. The EPR experiments for free ligand 4 and [Zn(hfac)2.4] in frozen solution suggested that the exchange couplings between the two aminoxyls (R) through the 2,2'-bipyridine rings are antiferromagnetic with JR-R/kB = -19.3 +/- 0.5 and -24.3 +/- 0.4 K, respectively. Isosceles triangular three-spin models were applied to the 1:1 magnetic metal complexes to give JR-M/kB = -19.1 +/- 0.2 K and JR-R/kB = -32.9 +/- 0.3 K for [Mn(hfac)2.4] and JR-M/kB = +73 +/- 18 K and JR-R/kB = -24.5 +/- 6.5 K for [Cu(hfac)2.4].     

Production of Acetone–Butanol–Ethanol (ABE) in Direct Fermentation of Cassava by Clostridium saccharoperbutylacetonicum N1-4

In this work, acetone–butanol–ethanol (ABE) fermentation characteristics of cassava starch and cassava chips when using Clostridium saccharoperbutylacetonicum N1-4 was presented. The obtained results in batch mode using a 1-L fermenter showed that C. saccharoperbutylacetonicum N1-4 was a hyperamylolytic strain and capable of producing solvents efficiently from cassava starch and cassava chips, which was comparable to when glucose was used. Batch fermentation of cassava starch and cassava chips resulted in 21.0 and 19.4 g/L of total solvent as compared with 24.2 g/L of total solvent when using glucose. Solvent productivity in fermentation of cassava starch was from 42% to 63% higher than that obtained in fermentation using corn and sago starches in the same condition. In fermentation of cassava starch and cassava chips, maximum butanol concentration was 16.9 and 15.5 g/L, respectively. Solvent yield and butanol yield (based on potential glucose) was 0.33 and 0.41, respectively, for fermentation of cassava starch and 0.30 and 0.38, respectively for fermentation using cassava chips.     

Unconventional Magnetic and Resistive Hysteresis in an Iodine‐Bonded Molecular Conductor

Simultaneous manipulation of both spin and charge is a crucial issue in magnetic conductors. We report on a strong correlation between magnetism and conductivity in the iodine‐bonded molecular conductor (DIETSe)₂FeBr₂Cl₂ [DIETSe=diiodo(ethylenedithio)tetraselenafulvalene], which is the first molecular conductor showing a large hysteresis in both magnetic moment and magnetoresistance associated with a spin‐flop transition. Utilizing a mixed‐anion approach and iodine bonding interactions, we tailored a molecular conductor with random exchange interactions exhibiting unforeseen physical properties.     

Use of ring-repeller, double-skimmer electrodes for efficient ion focusing in mass spectrometry.

The design and construction of a new type of time-of-flight mass spectrometer is described. The instrument was designed to improve the ionization efficiency and to efficiently detect ions. The system performance was evaluated using the SIMION software, and was compared with the experimental results. The shapes of the repeller, extraction, and ground electrodes had a strong effect on the trajectory of ions in the processes of ion acceleration and focusing. The major difference between the theory and the experiment can be attributed to space-charge effects.