Preparation and characterization of a viscosity index improver for naphthenic and paraffinic base oils

Copolymers of -methyl styrene and 2-ethylhexyl acrylate were prepared in a benzene solution. The presence of the copolymers were confirmed by solubility, IR and NMR tests. The molecular weight and the polydispersity of the polymers were estimated by GPC. The copolymers obtained were blended with paraffinic and naphthenic base oils. The viscosity, the viscosity index (VI) the Q value as well as the stability to shear and oxidation were obtained for these blends. The results are compared with the results obtained with an oil blend containing a commonly used high temperature additive. Two of the copolymers obtained have shown to be good alternatives for specific applications.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Comparative tests to improve the gas chromatographic analysis of chlorobornanes in fish samples

A comparison was made between electron capture negative ionization quadrupole mass spectrometry (ECNI-MS) and electron capture detection (ECD) with regard to repeatability and reproducibility for the gas chromatographic (GC) analysis of toxaphene congeners [chlorobornanes (CHBs)]. The tests, including standard solutions and several cleaned fish extracts, showed larger relative standard deviations (RSDs) for the repeatability of ECNI-MS but no differences in the reproducibility of the 2 techniques. The sensitivity of the GC-ECNI-MS was considerably better than that of GC/ECD. Four stepwise-designed comparative tests were also conducted on GC analysis, cleanup, and the complete method. The results showed that, according to the current state-of-the-art, coefficients of variation for the between-laboratory performance were not < 20% and were usually between 20 and 30%. In spite of separation problems, e.g., for CHB 26, which cannot be separated into a single-component peak, a 95% methyl 5% phenyl polysiloxane (CP Sil 8) column was preferred to more polar columns for the analysis of CHBs 26, 40, 41, 44, 50, and 62. CHB 62 was more difficult to determine than CHB 26 and 50. Addition of the CHBs 40, 41, and 44 to the standard set of 3 chlorobornanes (26, 50, and 62) resulted in more separation problems. A 3-step cleanup method was recommended.     

A field deployable method for a rapid screening analysis of inorganic arsenic in seaweed

Inorganic arsenic (iAs) in 13 store-bought edible seaweed samples and 34 dried kelp (Laminaria digitata) samples was determined by a newly developed, field-deployable method (FDM) with the aid of a field test kit for arsenic in water. Results from the FDM were compared to results from speciation analysis achieved by using high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The FDM consisted of a simple extraction method using diluted HNO₃ to quantitatively extract iAs without decomposing the organoarsenicals to iAs followed by the selective volatilisation of iAs as arsine (AsH₃) and subsequent chemo-trapping on a filter paper soaked in mercury bromide (HgBr₂) solution. Method optimization with a sub-set of samples showed 80–94% iAs recovery with the FDM with no matrix effect from organo-arsenic species in the form of dimethylarsinic acid (DMA) on the iAs concentration. The method displayed good reproducibility with an average error of ±19% and validation by HPLC-ICP-MS showed that the results from the FDM were comparable (slope = 1.03, R² = 0.70) to those from speciation analysis with no bias. The FDM can be conducted within an hour and the observed limit of quantification was around 0.05 mg kg^?1 (dry weight). This method is well suited for on-site monitoring of iAs in seaweed before it is harvested and can thus be recommended for use as a screening method for iAs in seaweed.

Open image in new window

Graphical abstract Screening seaweed for their inorganic arsenic concentration within one hour without bias has been made possible in the field by using a field deployable arsenic kit. Its accuracy and precision was compared to HPLC-ICPMS.

     

A Wacker-Cook synthesis of isoflavones: formononetine

A total synthesis of the isoflavone formononetine 1 by an oxidative Pd-mediated cyclization of α-methylenedeoxybenzoins 4a-c is described. Substrates 4a-c were rapidly assembled using ‘protected cyanohydrin’ chemistry.     

Determination of blood glucose parameter from human blood serum by using a quartz crystal microbalance sensor coated with phthalocyanines compounds

Determining the blood glucose level is important for the prevention and treatment of diabetes mellitus. We developed a sensor system using Quartz Crystal Microbalance (QCM) to determine the blood glucose level from human blood serum. This study consists of two experimental stages: artificial glucose/pure water solution tests and human blood serum tests. In the first stage of the study, the QCM sensor with the highest performance was identified using artificial glucose solution concentrations. In the second stage of the study, human blood serum measurements were performed using QCM to determine blood glucose levels. QCM sensors were coated with phthalocyanines (Pcs) by jet spray method. The blood glucose values of 96 volunteers, which ranged from 71 mg/dL to 329 mg/dL, were recorded. As a result of the study, human glucose values were determined with an average error of 3.25%.     

Nanosized cancer cell-targeted polymeric immunomicelles loaded with superparamagnetic iron oxide nanoparticles

Stable 30–50 nm polymeric polyethylene glycol–phosphatidylethanolamine (PEG–PE)-based micelles entrapping superparamagnetic iron oxide nanoparticles (SPION) have been prepared. At similar concentrations of SPION, the SPION-micelles had significantly better magnetic resonance imaging (MRI) T2 relaxation signal compared to ‘plain’ SPION. Freeze-fracture electron microscopy confirmed SPION entrapment in the lipid core of the PEG–PE micelles. To enhance the targeting capability of these micelles, their surface was modified with the cancer cell-specific anti-nucleosome monoclonal antibody 2C5 (mAb 2C5). Such mAb 2C5-SPION immunomicelles demonstrated specific binding with cancer cells in vitro and were able to bring more SPION to the cancer cells thus demonstrating the potential to be used as targeted MRI contrast agents for tumor imaging.