Determination of thiamine HCl and pyridoxine HCl in pharmaceutical preparations using UV-visible spectrophotometry and genetic algorithm based multivariate calibration methods

Simultaneous determination of binary mixtures pyridoxine hydrochloride and thiamine hydrochloride in a vitamin combination using UV-visible spectrophotometry and classical least squares (CLS) and three newly developed genetic algorithm (GA) based multivariate calibration methods was demonstrated. The three genetic multivariate calibration methods are Genetic Classical Least Squares (GCLS), Genetic Inverse Least Squares (GILS) and Genetic Regression (GR). The sample data set contains the UV-visible spectra of 30 synthetic mixtures (8 to 40 microg/ml) of these vitamins and 10 tablets containing 250 mg from each vitamin. The spectra cover the range from 200 to 330 nm in 0.1 nm intervals. Several calibration models were built with the four methods for the two components. Overall, the standard error of calibration (SEC) and the standard error of prediction (SEP) for the synthetic data were in the range of <0.01 and 0.43 microg/ml for all the four methods. The SEP values for the tablets were in the range of 2.91 and 11.51 mg/tablets. A comparison of genetic algorithm selected wavelengths for each component using GR method was also included.     

Analysis of Azithromycin in Human Plasma by LC–MS–MS

A simple sensitive and selective liquid chromatographic–tandem mass spectrometric method was developed and validated for the quantification of azithromycin in human plasma. Roxithromycin was used as the internal standard. The chromatographic separation was performed on a SunFire C18, 50 mm × 2.1, 3.5 μm column at 30 °C with mobile phase consisted of 1.54 g ammonium acetate, 250 mL water, 570 mL acetonitrile, 180 mL methanol and 0.6 mL glacial acetic acid. Flow rate was 0.2 mL min⁻¹. The work-up procedure involved a liquid–liquid extraction of the compounds. Mass spectrometric data were acquired in single ion monitoring. MRM mode of the ions 749.58 > 591.6 and 837.64 > 158.2 for azithromycin and roxithromycin, respectively. The method was validated in the concentration range of 2–1,000 ng mL⁻¹. Absolute recovery of azithromycin was 81.97%. Retention time for azithromycin was 0.9 and 1.1 min for roxithromycin. The run time was 2 min. This method was found suitable to analyse human plasma samples for application in pharmacokinetic, pharmacodynamic, bioavailability/bioequivalance studies.

     

Catalytic air oxidation of manganese in synthetic waters

An attempt was made to study the oxidation of manganese by air in synthetic waters. A series of batch experments were performed at differnet values of concentration, temperature and pH. Unoxidized manganese in the solution was determined by formaldoxime spectrometric method. Results of these studies indicated that the air oxidation of manganese soluble in water can be effectively performed in basic media and that oxidation yield increasedwith an increase in pH and concentration. The yield was very high in the presence of manganese dioxide, sepiolite or clinoptilolite in solution and, the oxidation was almost completed especially at high values of pH and concentration. The reaction was found to be first order with respect to Mn²⁺ with a very low activation energy. A yield of 62% was obtained for the air oxidation of wastewater taken from the treatment plant of Corum Municipality.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Multicomponent quantitative resolution of binary mixtures by using continuous wavelet transform

Continuous 1-dimensional wavelet transform (WT) was applied to the quantitative analysis of a vitamin combination of thiamine hydrochloride (THI) and pyridoxine hydrochloride (PYR) with strongly overlapping signals. Absorbance data from the UV-Vis absorption spectrum of width 1150 were subjected to Gauss1 and Gauss2 WTs. Because of its flexibility, data processing, and its high signal amplitude, the continuous WT method is a powerful tool for analysis of multicomponent mixtures. By measuring the amplitude signals corresponding to the selected zero-crossing points of the transformed signal, we obtained the calibration curve. The validation of the calibration graphs was confirmed with different mixtures of THI and PYR at various concentration ratios. A brief explanation of the continuous wavelet method is given. MATLAB 6.5 software was used to perform the calculations. The results of our study were compared with those obtained by spectroscopic, chemometric, and liquid chromatographic methods, and good agreement was found.     

A comparison of electron ionization mass spectra obtained at 70 eV,low electron energies,and with cold EI and their NIST library identification probabilities

Electron ionization (EI) mass spectra of 46 compounds from several different compound classes were measured. Their molecular ion abundances were compared as obtained with 70‐eV EI, with low eV EI (such as 14 eV), and with EI mass spectra of vibrationally cold molecules in supersonic molecular beams (Cold EI). We further compared these mass spectra in their National Institute of Standards and Technology (NIST) library identification probabilities. We found that

1. Low eV EI is not a soft ionization method, and it has little or no influence on the molecular ion relative abundances for large molecules and those with weak or no molecular ions.
2. Low eV EI for compounds with abundant or dominant molecular ions in their 70 eV mass spectra results in the reduction of low mass fragment ions abundances thereby reducing their NIST library identification probabilities thus rarely justifies its use in real‐world applications.
3. Cold EI significantly enhances the relative abundance of the molecular ions particularly for large compounds; yet, it retains the low mass fragment ions; hence, Cold EI mass spectra can be effectively identified by the NIST library.
4. Different standard EI ion sources provide different 70 eV EI mass spectra. Among the Agilent technologies ion sources, the “Extractor” exhibits relatively abundant molecular ions compared with the “Inert” ion source, while the “High efficiency source” (HES) provides mass spectra with depleted molecular ions compared with the “Inert” ion source or NIST library mass spectra.

These conclusions are demonstrated and supported by experimental data in nine figures and two tables.     

Synthesis and Characterization of Mononuclear Cobalt(II), Nickel(II), Copper(II), Zinc(II), Cadmium(II) and Dinuclear Uranyl(VI) Complexes with N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino}butyl) N′,N′-dihydroxyethanediimidamide

In this study, the new vic-dioxime ligand (LH₂) and its complexes with Co^II, Ni^II, Cu^II, Zn^II, Cd^II and UO₂^VI are described. The structures of these complexes were characterized by elemental analyses, i.r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis. spectroscopy, magnetic susceptibility measurements, conductivity measurements and thermogravimetric analyses (t.g.a.).     

A Comment on Change of Nusselt Number Sign in a Channel Flow Filled by a Fluid-Saturated Porous Medium with Constant Heat Flux Boundary Conditions

The aim of this Letter is to show that, the Nusselt number sign might be changed without changing of heat transfer direction at the wall of channels, even for flows without viscous dissipation.     

Synthesis and Properties of Thiophene and Dithiin Functionalized Tetrathiafulvalenes

Abstract

Syntheses of two analogues of tetrathiafulvalene (TTF), fused to 1,4-dithiin and thiophene rings, substituted with thiophene moieties, have been illustrated. The syntheses were accomplished through the reaction of a 1,8-diketone with phosphorus pentasulfide or Lawesson's reagent in boiling dry toluene. Conversion of the thioketones to their the oxo forms with mercury (II) acetate, was followed by self-coupling in freshly distilled boiling triethyl phosphite. Attempts for their electro-polymerizations through the thiophene groups at the peripherals were unsuccessful. Computational chemistry studies revealed that the thiophene groups did not exhibit enough spin densities to perform polymerization.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.