Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Topological efficiency under graph operations

In this paper we present explicit formulas for computing the topological efficiency index of the most important graph operations such as the Cartesian product, composition, corona, join and hierarchical product of two graphs. We apply our results to compute this distance-related invariant for some important classes of molecular graphs and nano-structures by specializing components of these graph operations.     

Riboflavin as a green sorbent in dispersive micro-solid-phase extraction of several pesticides from fruit juices combined with dispersive liquid–liquid microextraction

A vortex-assisted dispersive micro-solid-phase extraction procedure using a new and green sorbent was developed as a simple, fast, and efficient sample preparation method for the extracting five pesticides in several fruit juice samples. In this study, for the first time, riboflavin was used as an efficient sorbent. A few milligrams of riboflavin was directly added into the aqueous solution containing the analytes to adsorb them. After adsorption the analytes, they were desorbed and more concentrated by a dispersive liquid–liquid microextraction procedure. The influence of several effective parameters such as amount of riboflavin, pH, vortex time, eluent nature and volume, and extraction solvent type and volume on the extraction efficiency was investigated. In optimal conditions, linear ranges of the calibration curves were broad. The limits of detection and quantification were attained in the ranges of 0.56–1.5  and 1.9–0.52 ng mL⁻¹, respectively. The proposed method demonstrated to be suitable for concurrent extraction of the studied pesticides in various fruit juice samples with high enrichment factors (320–360) and precision (relative standard deviation ≤7.8% for intra- [n = 6] and interday [n = 4] precisions at a concentration of 25 ng mL⁻¹ of each pesticide).     

Time-dependent discrete road network design with both tactical and strategic decisions

This paper aims to model and investigate the discrete urban road network design problem, using a multi-objective time-dependent decision-making approach. Given a base network made up with two-way links, candidate link expansion projects, and candidate link construction projects, the problem determines the optimal combination of one-way and two-way links, the optimal selection of capacity expansion projects, and the optimal lane allocations on two-way links over a dual time scale. The problem considers both the total travel time and the total CO emissions as the two objective function measures. The problem is modelled using a time-dependent approach that considers a planning horizon of multiple years and both morning and evening peaks. Under this approach, the model allows determining the sequence of link construction, the expansion projects over a predetermined planning horizon, the configuration of street orientations, and the lane allocations for morning and evening peaks in each year of the planning horizon. This model is formulated as a mixed-integer programming problem with mathematical equilibrium constraints. In this regard, two multi-objective metaheuristics, including a modified non-dominated sorting genetic algorithm (NSGA-II) and a multi-objective B-cell algorithm, are proposed to solve the above-mentioned problem. Computational results for various test networks are also presented in this paper.     

Effect of self-fields on the electron cyclotron maser instability in a dielectric loaded waveguide

The influence of self-fields on the cyclotron maser instability in a hollow electron beam propagating parallel to a uniform axial magnetic field B ₀ ê _z in a dielectric loaded waveguide is investigated. The theoretical analysis is carried out within the framework of linearized Vlasov-Maxwell equations. It is assumed that the beam is thin with the radial thickness much smaller than the beam radius. A new dispersion relation for azimuthally symmetric electromagnetic perturbation is derived and analyzed numerically. The influence of self-fields on the cyclotron maser instability in a dielectric loaded waveguide for different dielectric medium is studied. It is found that unlike the hollow waveguide the growth rate is increased by increasing self-fields. The instability band width decreases due to the increasing self-fields. The maximum growth rate increases gradually as self-fields increase as regards a different dielectric medium.     

A new molecularly imprinted polymer for selective extraction and pre‐concentration of guaifenesin in different samples: Adsorption studies and kinetic modeling

This paper describes the synthesis of a molecularly imprinted polymer by chemical oxidation of pyrrole as the functional monomer, and at the presence of guaifenesin as the template. The prepared polymer was used as adsorbent in molecularly imprinted solid‐phase extraction followed by spectrophotometric determination. Different parameters in the solid‐phase extraction including sample pH, adsorbent weight, washing solution, and elution solvent were studied to determine optimum conditions for isolation and enrichment of guaifenesin. The results showed guaifenesin was quantitatively adsorbed on the molecularly imprinted polymer at pH 6.0 and completely eluted with an ethanol–water solution (50% v/v). An enrichment factor of four with satisfactory recoveries (87.0–95.0%) was obtained. The solid‐phase extraction columns could be used for up to six consecutive elution‐loading cycles without significant decreases in the analyte recoveries. The method had a dynamic range of 3.0 × 10^?6–1.5 × 10^?4 mol/L with a limit of detection and limit of quantification of 1.4×10^?6 and 4.5×10^?6 mol/L, respectively. The proposed procedure was used for the extraction and determination of guaifenesin in different pharmaceutical formulations, with satisfying results being achieved.     

On ordinary generalized geometric–arithmetic index

The ordinary generalized geometric–arithmetic index of graphs is introduced and some properties especially lower and upper bounds in terms of other graph invariants and topological indices are obtained.     

Reactively compatibilized and dynamically vulcanized thermoplastic elastomers based on high-density polyethylene and reclaimed rubber

Melt blending was employed to prepare thermoplastic elastomer (TPE) of reclaimed rubber (RR) and high density polyethylene (HDPE). Mechanical properties of TPE samples were improved in different methods including dynamic vulcanization and reactive blending (reactive compatibilization) during melt mixing in an internal Haake mixer. The physical and mechanical properties of the TPE blends were investigated by the dynamic mechanical analysis (DMA) and tensile tests. The thermal behavior was characterized by differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The phase morphology of the blends was studied by scanning electron microscopy (SEM). Experimental results showed that, both static and dynamic mechanical properties of reactively-compatibilized and dynamically-vulcanized samples improved significantly compared with the virgin samples. The effect of dynamic-vulcanization and reactivecompatibilization on the mechanical properties revealed that the Young’s modulus and storage modulus increased with both improvement methods. SEM results showed that, dynamic-vulcanization and reactivecompatibilization methods improved the distribution of RR particles in HDPE matrix. Although both methods improved the thermal and mechanical properties of the HDPE/RR blends, dynamic-vulcanization was more effective and promising approach due to the higher properties of HDPE/RR blends prepared by this method.     

Application of Gaussian quadrature method to characterize heavy ends of hydrocarbon fluids for modeling wax precipitation

The hydrocarbon plus fractions that comprise a significant portion of naturally occurring hydrocarbon fluids create major problems when determining the thermodynamic properties and the volumetric behavior of these fluids by equations of state. These problems arise due to the difficulty of properly characterizing the plus fractions (heavy ends). Proper characterization of the heavier components is important when cubic equations of state and/or solid formation thermodynamic models are used to describe complex phase behavior of reservoir fluids. The effect of heavy fractions characterization on thermodynamic modeling of wax precipitation has been investigated using different models including Won, Pan and proposed models. In order to characterize the plus fraction (heavier part) as a series of pseudocomponents, a probability model that expresses the mole fraction as a continuous function of the molecular weight has been used. The study has been conducted using several mixtures. Two different SCN (single carbon number), C₇₊${\text{C}}_{7^{+}}$ and C₁₀₊${\text{C}}_{{10}^{+}}$ were chosen. The Chosen SCN were distributed to multi-components of five, six, and/or ten using continuous function and Gaussian quadrature method. The results showed that the fractioning is required to be able to predict wax precipitation. Distribution of C₁₀₊${\text{C}}_{{10}^{+}}$ using a proper distribution function has shown improvement in predictions of WAT and the amount of wax deposited in comparison with the characterization of C₇₊${\text{C}}_{7^{+}}$ using semi-continuous approach. In predicting of WAT and the amount of wax build up the developed model showed superiority over the others.     

Abelian coverings of finite general linear groups and an application to their non-commuting graphs

In this paper we introduce and study a family A_n(q)\mathcal{A}_{n}(q) of abelian subgroups of GL_n(q){\rm GL}_{n}(q) covering every element of GL_n(q){\rm GL}_{n}(q). We show that A_n(q)\mathcal{A}_{n}(q) contains all the centralizers of cyclic matrices and equality holds if q>n. For q>2, we obtain an infinite product expression for a probabilistic generating function for |A_n(q)||\mathcal{A}_{n}(q)|. This leads to upper and lower bounds which show in particular that