Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.     

Effective binuclear Pd(II) complexes for Suzuki reactions in water

A series of new ionic binuclear Pd(II) complexes supported by water‐soluble bis(α‐diimine) ligands were prepared and employed as catalysts for the palladium‐catalyzed Suzuki reaction in aqueous media. The binuclear nature of the complexes increased the reaction rate, while electronic and steric modification of the ligand frameworks had a remarkable influence upon the catalytic activity of the palladium complexes. The catalysts were shown to be homogeneous through mercury poisoning experiments and complexes could be recycled more than 10 times without loss of catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Minimizing Side Product Formation in Alkyne Functionalization of Ruthenium Complexes by Introduction of Protecting Groups

The synthesis of alkyne functionalized bipyridine ruthenium complexes are reported. The improved synthetic approach through application of stable protecting groups prevents formation of possible side products while facilitating purification. By applying copper-catalysed azide-alkyne cycloaddition reactions (CuAAC) pyrene units with flexible alkyl linkers are introduced at the periphery of the complex, opening up various applications including surface immobilization and DNA intercalation. All complexes are characterized structurally as well as photophysically, especially regarding the influence of the introduced alkyne and triazolyl substituents on their photophysical behavior.     

Identification of radical structures on 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5‐dimethylbenzimidazoliumsilver(I)bromide exposed to gamma rays: an EPR study

1‐Pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide and their Ag⁺ complexes were synthesized and their polycrystal forms were produced by recrystallization in dichloromethane/Et₂O solvent system. Structural determinations were carried out by ¹H NMR and ¹³C NMR with a Varian 400 NMR system using tetramethylsilane as internal standard and CDCl₃ as solvent. The disappearance of acidic N‐heterocyclic carbene proton showed the formation of Ag(I) complexes. Also, elemental analyses were carried out. Electron paramagnetic resonance (EPR) measurements were performed to determine the formed radical structure on the samples irradiated at the room temperature for 72 h by using ⁶⁰Co‐source with dose rate of 0.680 kGy. The EPR measurements were carried out in the temperature range of 200 K–450 K. Identical radicals were determined on the irradiated compounds. It was observed that the shapes of the spectra of the samples were independent of the temperature but, the resonance line intensities changed linearly with the temperature. Also, it was detected that the free radical on the 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide is not stable compared to that on the 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

New product launch decisions with robust optimization

We consider a problem where a company must decide the order in which to launch new products within a given time horizon and budget constraints, and where the parameters of the adoption rate of these new products are subject to uncertainty. This uncertainty can bring significant change to the optimal launch sequence. We present a robust optimization approach that incorporates such uncertainty on the Bass diffusion model for new products as well as on the price response function of partners that collaborate with the company in order to bring its products to market. The decision-maker optimizes his worst-case profit over an uncertainty set where nature chooses the time periods in which (integer) units of the budgets of uncertainty are used for worst impact. This leads to uncertainty sets with binary variables. We show that a conservative approximation of the robust problem can nonetheless be reformulated as a mixed integer linear programming problem, is therefore of the same structure as the deterministic problem and can be solved in a tractable manner. Finally, we illustrate our approach on numerical experiments. Our model also incorporates contracts with potential commercialization partners. The key output of our work is a sequence of product launch times that protects the decision-maker against parameter uncertainty for the adoption rates of the new products and the response of potential partners to partnership offers.     

Structural and Optical Properties of Zinc Nitride Films Prepared by Pulsed Filtered Cathodic Vacuum Arc Deposition

Polycrystalline zinc nitride films are deposited on Coming 7059 glass substrates by pulsed filtered cathodic vacuum arc deposition （PFCVAD）. The crystallographic structure is studied by means of x-ray diffraction. These measurements show that all the films are crystallized in the cubic structure, in a preferred orientation along the （332） and （631） directions. Weak XRD signal shows small crystallites distributed in an amorphous tissue. A small improvement of crystallinity is observed with annealing. Optical parameters such as absorption, energy band gap, Urbach tail, extinction coefficients have been determined. The Urbach tail energy is decreased with annealing at 500℃ for one hour. Energy band gap values are found to be increased by annealing.     

Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs’ performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m^?2.     

Developing prospective teachers’ covariational reasoning through a model development sequence

Forming part of a wider research study, the current study investigated prospective middle school mathematics teachers’ ways of covariational reasoning on tasks involving simultaneously changing quantities. As the introductory theme of a larger unit on derivative, a model development sequence on covariational reasoning was designed and experimented with 20 participants in a mathematical modeling course offered to prospective teachers. The participants’ developing abilities of covariational reasoning were documented under three categories: (i) identifying the variables, (ii) ways of coordinating the variables, and (iii) ways of quantifying the rate of change. The results revealed significant improvement in the prospective teachers’ ways of identifying and coordinating the variables, and in quantifying the rate of change. Moreover, the results indicated that preference for a particular way of thinking in identifying and coordinating the variables determined the prospective teachers’ way of quantifying the rate of change and thereby their level of covariational reasoning.