Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

Hydrolysis of the Peptide Bond in N-Acetylated L-Methionylglycine Catalyzed by Various Palladium(II) Complexes: Dependence of the Hydrolytic Reactions on the Nature of the Chelate Ligand in cis-[Pd( L)(H 2O) 2] 21 Complexes

Summary. Hydrolytic reactions between various palladium(II) complexes of the type cis-[Pd(L)(H₂O)₂]²⁺ in which L is ethylenediamine (en), 1,2-propylenediamine (1,2-pn), isobutylenediamine (ibn), 1,2-diaminocyclohexane (1,2-dach), N-methylethylenediamine (Meen), N,N,N,N-tetramethylethylenediamine (Me₄en), S-methyl L-cysteine (MeS-L-HCys), L-methionine (L-HMet), and 2,5-dithiahexane (dth) and dipeptide N-acetylated L-methionylglycine (MeCOMet-Gly) were studied by ¹H NMR spectroscopy. The reactions were carried out in the pH range 2.0–2.5 and at 50°C. In all these reactions, palladium(II) complex bound to a methionine residue effects the regioselective cleavage of the amide bond involving the carboxylic group of methionine. We found that the rate of hydrolysis and mechanism of this reaction are strongly dependent from the nature of the chelate ligand L in palladium(II) complexes of the type cis-[Pd(L)(H₂O)₂]²⁺.     

Immobilization of amine-modified oligonucleotides on aldehyde-terminated alkanethiol monolayers on gold

Chemistry is described for the fabrication of DNA arrays on gold surfaces. Alkanethiols modified with terminal aldehyde groups are used to prepare a self-assembled monolayer (SAM). The aldehyde groups of the monolayer may be reacted with amine-modified oligonucleotides or other amine-bearing biomolecules to form a Schiff base, which may then be reduced to a stable secondary amine by treatment with sodium cyanoborohydride. The surface modifications and reactions are characterized by polarization modulation Fourier transform infrared reflection absorption spectroscopy (PM-FTIRRAS), and the accessibility, binding specificity, and stability of the DNA-modified surfaces are demonstrated in hybridization experiments.     

Recent results from the TCV tokamak

During the first two years of operation, the TCV tokamak has produced a large variety of plasma shapes and magnetic configurations, with 1.0B _tor1.46T,I _p800kA,k2.05, –0.71. A new shape control algorithm, based on a finite element reconstruction of the plasma current in real time, has been implemented. Vertical growth rates up to 1000s^–1 have been stabilized using the external coil system. Ohmic H-modes with Troyon factors ( _tor aB/I _p) up to two and densities up to 2.25×10²⁰m^–3, corresponding to the Greenwald limit, have been obtained in diverted discharges. Limiter H-modes with line averaged electron densities up to 1.7×10²⁰m^–3 have been obtained in elongated D-shaped plasmas with 360 kAI _P600 kA.Presented at 17^th Symposium Plasma Physics and Technology, Prague, June 13–16, 1995.This work was partly supported by the Fonds National Suisse de la Recherche Scientifique.     

Rigidity of harmonic maps of maximum rank

Thehomotopical rank of a mapf:M →N is, by definition, min{dimg(M) ¦g homotopic tof}. We give upper bounds for this invariant whenM is compact Kähler andN is a compact discrete quotient of a classical symmetric space, e.g., the space of positive definite matrices. In many cases the upper bound is sharp and is attained by geodesic immersions of locally hermitian symmetric spaces. An example is constructed (Section 9) to show that there do, in addition, exist harmonic maps of quite a different character. A byproduct is construction of an algebraic surface with large and interesting fundamental group. Finally, a criterion for lifting harmonic maps to holomorphic ones is given, as is a factorization theorem for representations of the fundamental group of a compact Kähler manifold. The technique for the main result is a combination of harmonic map theory, algebra, and combinatorics; it follows the path pioneered by Siu in his ridigity theorem and later extended by Sampson.     

Determination of platinum-group metals and lead in vegetable environmental bio-monitors by voltammetric and spectroscopic techniques: critical comparison

This paper reports voltammetric sequential determination of Pt(II), Pd(II), and Rh(III), by square-wave adsorption stripping voltammetry (SWAdSV), and Pb(II), by square-wave anodic stripping voltammetry (SWASV), in vegetable environmental matrices. Analytical procedures were verified by the analysis of the standard reference materials: Olive Leaves BCR-CRM 062 and Tomato Leaves NIST-SRM 1573a. Precision and accuracy, expressed as relative standard deviation and relative error, respectively, were always less than 6% and the limits of detection (LOD) for each element were below 0.096 g g^–1. Once set up on the standard reference materials, the analytical procedure was transferred and applied to laurel leaves sampled in proximity to a superhighway and in the Po river mouth area. A critical comparison with spectroscopic measurements is discussed.     

Antimony(III) Oxide Film on a Cellulose Fiber Surface: Preparation and Characterization of the Composite

Cellulose/antimony(III) oxide composites, Cel/Sb(2)O(3), with oxide loadings of 1.7, 5.4, and 9.2 wt% were prepared by reacting the precursor SbCl(3) reagent with cellulose in dry ethanol solution. The reaction of the Lewis acid and the cellulose fibers occurred at the~amorphous domains of the biopolymer, increasing the crystallinity degree of the composite compared with that of the untreated cellulose. The scanning electron microscopy images and metal mapping for all samples showed that the oxide film layer uniformly covered the fiber surfaces with no detectable agglomerates of the oxide particles. The synchrotron X-ray diffraction patterns indicated that the antimony oxide film was obtained as a crystalline phase with orthorombic structure. The atomic ratios of O/Sb, determined by X-ray photoelectron spectroscopy, indicated that, for Cel/Sb(2)O(3) samples with 9.3 wt% loading, the fiber surface is nearly saturated by the oxide layer. The thermal stability of Cel/Sb(2)O(3) compared to that of untreated cellulose is practically unaffected. Copyright 2000 Academic Press.