Reactivity of a N-Coordinated Germylene-Borane Complex: From Ge→B to Ge→Ga Coordination

Reactivity studies of the Ge^II→B complex L(Cl)Ge⋅BH₃ ( 1 ; L=2-Et₂NCH₂-4,6-tBu₂-C₆H₂) were performed to determine the effect on the Ge^II→B donation. N-coordinated compounds L(OtBu)Ge⋅BH₃ ( 2 ) and [LGe⋅BH₃]₂ ( 3 ) were prepared. The possible tuning of the Ge^II→B interaction was proved experimentally, yielding compounds 1-PPh₂-8-(LGe)-C₁₀H₆ ( 4 ) and L(Cl)Ge⋅GaCl₃ ( 5 ) without a Ge^II→B interaction. In 5 , an unprecedented Ge^II→Ga coordination was revealed. The experimental results were complemented by a theoretical study focusing on the bonding in 1 − 5 . The different strength of the Ge^II→E (E=B, Ga) donation was evaluated by using energy decomposition analysis. The basicity of different L(X)Ge groups through proton affinity is also assessed.     

Ab initio path-integral molecular dynamics

A path-integral molecular dynamics technique for strongly interacting atoms using ab initio potentials derived from density functional theory is implemented. This allows the efficient inclusion of nuclear quantum dispersion in ab initio simulations at finite temperatures. We present an application to the quantum cluster H ₅ ⁺ .     

Selective Si--C bond cleavage as synthetic entry to a functionalized lithiosilane

Treatment of the phenyl-substituted silane 4 with lithium metal afforded the functionalized lithiosilane rac-2 by selective cleavage of one Si-C bond between silicon and a phenyl group. The resulting lithiosilane rac-2 crystallizes as the dimer (2.THF)2, which represents the first example of a dimeric organyl-substituted lithiosilane in the presence of THF.     

Synthesis of diastereomeric 3-hydroxy-4-pyrrolidinyl derivatives of nucleobases

The work deals with the synthesis of hydroxypyrrolidine analogs of nucleosides. Starting from the optically pure l- or d-tartaric acid, we improved the synthesis of enantiomeric trans-3,4-dihydroxypyrrolidines and elaborated a procedure for the synthesis of all possible diastereoisomers of 3-hydroxy-4-pyrrolidinyl derivatives of both purine and pyrimidine nucleobases. The prepared compounds were tested for cytostatic and antiviral properties but no significant activity was found.     

Isochorismate pyruvate lyase: a pericyclic reaction mechanism?

Isochorismate pyruvate lyase (IPL) catalyzes the cleavage of isochorismate to give salicylate and pyruvate, a key step in bacterial siderophore biosynthesis. We investigated the enzyme from Pseudomonas aeruginosa using isochorismate selectively deuterated at C2 as a substrate. Monitoring the reaction by 2H NMR spectroscopy revealed that the label is quantitatively transferred from C2 to C9, producing stoichiometric amounts of [3-2H]pyruvate as product. Moreover, the deuterium kinetic isotope effect of 2.34 +/- 0.08 on kcat indicates that C-H cleavage is significantly rate limiting. Consistent with these data, hybrid density functional theory (HDFT) calculations at the Becke3LYP/DZ+(2d,p) level of theory predict a concerted but highly asynchronous pericyclic transition structure, in which carbon-oxygen bond cleavage is more advanced than hydrogen atom transfer from C2 to C9; the calculated 2H isotope effect of 2.22 at C2 is in excellent accord with the experimental value. Together, these findings indicate that IPL should be added to the small set of proteins that are known to catalyze pericyclic reactions. They also raise the possibility that enzymes, such as chorismate pyruvate lyase, salicylate synthase, 4-amino-4-deoxychorismate lyase, and anthranilate synthase, which accelerate formally similar reaction steps, may also exploit pericyclic mechanisms.     

Simple spectrophotometric determination of Fe in oxalate and HCl soil extracts

We describe a spectrophotometric method to determine the sum of Fe(II) plus Fe(III) in HCl and oxalate extracts. The principle of the method is to reduce Fe(III) by ascorbate in near-neutral solution and to sequester the Fe(II) formed as a tri-ferrozine complex, which is then determined photometrically at 562 nm. Because the complex is stable, the reaction is irreversible and complete. Fe(III) in HCl solution reacted very rapidly, whereas oxalate decelerated the overall reaction so that pseudo first-order kinetics with respect to Fe(III) was detected. However, when extractions were conducted at the recommended soil:solution ratio, the absorption reached 98% of its final value within a few minutes. To test the method, four soils differing considerably in texture and carbonate, organic matter, and Fe(III)(hydr)oxide contents were extracted with oxalate in the dark for amorphous (Fe(o)), and with boiling oxalate for total Fe(III)(hydr)oxide (Fe(bo)). This newly developed spectrophotometric method showed excellent correspondence with the conventional atomic absorption spectroscopy (AAS) method. The method presented here can therefore be used as an alternative method to determine the Fe content of oxalate and hydrochloric acid extracts if AAS is not available. Oxalate extracts low in Fe content, which cannot be diluted, are easier to determine by the photometric method than by AAS.     

Use of chelating resins and inductively coupled plasma mass spectrometry for simultaneous determination of trace and major elements in small volumes of saline water samples

For some saline environments (e.g. deeply percolating groundwater, interstitial water in marine sediments, water sample collected after several steps of fractionation) the volume of water sample available is limited. A technique is presented which enables simultaneous determination of major and trace elements after preconcentration of only 60 mL sample on chelating resins. Chelex-100 and Chelamine were used for the preconcentration of trace elements (Cd, Cu, Pb, Zn, Sc) and rare earth elements (La, Ce, Nd, Yb) from saline water before their measurement by inductively coupled plasma mass spectrometry. Retention of the major elements (Na, Ca, Mg) by the Chelamine resin was lower than by Chelex; this enabled their direct measurement in the solution after passage through the resin column. For trace metal recoveries both resins yield the same mass balance. Only Chelex resin enabled the quantitative recovery of rare earth elements. The major elements, trace metals and rare earth elements cannot be measured after passage through one resin only. The protocol proposes the initial use of Chelamine for measurement of trace and major elements and then passage the same sample through the Chelex resin for determination of the rare earth elements. The detection limit ranged from 1 to 12 pg mL(-1). At concentrations of 1 ng mL(-1) of trace metals and REE spiked in coastal water the precision for 10 replicates was in the range of 0.3-3.4% (RSD). The accuracy of the method was demonstrated by analyzing two standard reference waters, SLRS-3 and CASS-3.     

Dielectric properties of beryllia ceramics in the near-millimeter wavelength range

We report the refractive indices and absorption coefficients for four beryllia (BeO) ceramic samples. These dielectric properties have been measured over the range from 4 to 18 cm^–1 by use of a Michelson interferometer. The index n, follows the linear relationship n=0.6517 cm³/g×+0.7130 with density, , over the range 2.8<<3.0 g/cm³.     

Phosphinophosphiniden-Phosphorane tBu2P?P = P(R)tBu2 aus Li(THF)2[η2-(tBu2P)2P] und Alkylhalogeniden

The Phosphinophosphinidene-phosphoranes ^tBu₂P? P = P(R)^tBu₂ from Li(THF)₂[η²-(^tBu₂P)₂P] and Alkyl Halides We report the formation of ^tBu₂P? P = P(R)^tBu₂ a and (^tBu₂)₂PR b (with R = Me, Et, ⁿPr, ⁱPr, ⁿBu, PhCH₂, H₂C = CH? CH₂ and CF₃) reactions of Li(THF)₂[η²-(^tBu₂P)₂P] 2 with MeCl, MeI, EtCl, EtBr, ⁿPrCl, ⁿPrBr, ⁱPrCl, ⁿBuBr, PhCH₂Cl, H₂C = CH? CH₂Cl or CF₃Br. In THF solutions the ylidic compounds a predominate, whereas in pentane the corresponding triphosphanes b are preferrably formed. With ClCH₂? CH = CH₂ only b is produced; CF₃Br however yields both ^tBu₂P? P = P(Br)^tBu₂ and ^tBu₂P? P = P(CF₃)^tBu₂, but no b . The ratio of a:b is influenced by the reaction temperature, too. The compounds ^tBu₂P? P = P(Et)^tBu₂ 4a and (^tBu₂P)₂PEt 4 b , e. g., are produced in a ratio of 4:3 at ?70°C in THF, and 1:1 at 20°C; whereas 1:1 is obtained at ?70°C in pentane, and 1:2 at 20°C. Neither ^tBuCl nor H₂C = CHCl react with 2 . The compounds a decompose thermally or under UV irradiation forming ^tBu₂PR and the cyclophosphanes (^tBu₂P)_nP_n.