Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Combining synchronous fluorescence spectroscopy with multivariate methods for the analysis of petrol-kerosene mixtures

Synchronous fluorescence spectroscopy (SFS) is a rapid, sensitive and nondestructive method suitable for the analysis of multifluorophoric mixtures. The present study demonstrates the use of SFS and multivariate methods for the analysis of petroleum products which is a complex mixture of multiple fluorophores. Two multivariate techniques principal component regression (PCR) and partial least square regression (PLSR) have been successfully applied for the classification of petrol-kerosene mixtures. Calibration models were constructed using 35 samples and their validation was carried out with varying composition of petrol and kerosene in the calibration range. The results showed that the method could be used for the estimation of kerosene in kerosene-mixed petrol. The model was found to be sensitive, detecting even 1% contamination of kerosene in petrol.     

Synthesis of enantiopure furo[2,3-b]pyrroles

A simple method for the preparation of enantiopure furo[2,3-b]pyrroles, a rare class of concave bicyclic nitrogen and oxygen heterocycle, in promising yield has been developed. The 3-substituted pyrrolidinediones prepared from (2S,3S)-tetrahydro-3-hydroxy-5-oxo-2,3-furandicarboxylic acid (Garcinia acid) have been cyclized diastereo as well as enantioselectively to furo[2,3-b]pyrroles. The cyclization follows Baldwin’s rule.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

Biogenic Synthesis of Rod Shaped ZnO Nanoparticles Using Red Paprika (Capsicum annuum L. var. grossum (L.) Sendt) and Their in Vitro Evaluation

Journal of Cluster Science - Metal oxide nanoparticles (NPs) have gained attention in biomedicine due to their broad spectrum of applications, such as targeted drug delivery, their use as...     

Ni0.1Co0.9Fe2O4-based electrochemical sensor for the detection of paracetamol

A novel electrochemical sensor based on nickel-doped cobalt ferrite nanoparticles (Ni_0.1Co_0.9Fe₂O₄)-modified glassy carbon electrode (NCF/GCE) was presented for the sensitive detection of paracetamol. Experimental conditions such as pH, applied potentials and concentration were investigated using cyclic voltammetric and chronoamperometric techniques. The modified electrode exhibited excellent catalytic response towards the oxidation of paracetamol with good reproducibility. The overpotential for oxidation of paracetamol is decreased, and the current response enhanced significantly on the modified electrode in comparison with that of bare electrode. Linear calibration curve is obtained over the range 2 μM to 8,000 μM having a detection limit of 11 nM. The modified electrode facilitated the simultaneous detection of paracetamol, ascorbic acid, and dopamine with good reproducibility.     

Dynamics of radionuclides activity,radon exhalation rate of soil and assessment of radiological parameters in the coastal regions of Kerala,India

Journal of Radioanalytical and Nuclear Chemistry - The activity concentration of natural radionucides such as 40K, 226Ra and 232Th and radon surface and mass exhalation rates of the soil were...     

Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch

Besides their widespread use in coordination chemistry, 2,2’-bipyridines are known for their ability to undergo cis–trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2’-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1 , that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2’-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H⁺ units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.     

Regioselective addition reactions at C-2 of 3,4-dihydropyrimidinones. Synthesis and evaluation of multifunctionalized tetrahydropyrimidines

Multifunctionalized tetrahydropyrimidines derivatives have been synthesized from Biginelli 3,4-dihydropyrimidin-2-(1H)-thiones (DHPMs) efficiently. The transformation includes desulfurization of DHPMs with Raney-Ni and subsequent regioselective C-2 functionalization using a variety of C-nucleophiles with simultaneous activation with ethyl chloroformate. Functionalized pyrimidine derivatives containing bulky substituents at C-2 of the pyrimidine ring are cytostatic.     

Conformational control in a bipyridine linked π-conjugated oligomer: cation mediated helix unfolding and refolding

A chiral π-conjugated oligomer having alternate bipyridine and carbazole moieties connected through acetylinic bonds undergoes helical folding in chloroform-acetonitrile (40/60, v/v) as evident by fluorescence and circular dichroism changes. In the presence of transition metal cations such as Zn(2+) defolding of the helical conformation occurs. Upon decomplexation of the cation with EDTA, the helical conformation is regained.