Nonlinear frequency response analysis: a recent review and perspectives

The nonlinear frequency response analysis (NFRA) can be seen as an extension of electrochemical impedance spectroscopy. NFRA gives a full and detailed representation of the system response and can establish a connection between model parameters and the experimentally observed phenomena. In this article, different theoretical NFRA approaches and the most recent application examples are discussed. A simple electrochemical example is used to showcase the benefits and disadvantages of analyzing the system response by using different approaches. In addition, it was shown how to extract experimental harmonic values and analyze them.     

Counting nucleon pairs

A simple method is used to count average numbers of different kinds of nucleon pairs within the Sp(4) seniority-like model which describesT=1 pairing modes of protons and neutrons. These numbers as well as the total strengths of pair-transfer processes clearly indicate that pn configurations are preferred in theN _p=N _n odd-odd systems. Presented at Workshop on calculation of double-beta-decay matrix elements (MEDEX’97), Prague, May 27–31, 1997.     

Pt(IV)-catalyzed cyclization of arene-alkyne substrates via C-H bond functionalization

We herein report that PtCl₄ has proven to be a hydroarylation catalyst with an efficiency and substrate scope superior to previously known methods. This catalyst demonstrated consistent performance with arene-yne substrates of diverse structural features, including propargyl ethers, propargylamines, and alkynoate esters, providing good to excellent yields of the 6-endo products (chromenes, dihydroquinolines, and coumarins). In contrast, Pt(II), Pd(II), and Ga(III) salts were shown to be sensitive to the substitution on the alkyne moiety. PtCl₄ is compatible with both terminal and disubstituted alkynes, as well as with various functionalities on the arene ring, including methyl, methoxyl, hydroxyl, protected amine, and halide.     

Crystal structure and vibrational spectra of hydrazinium (2+) tri-μ-fluoro bis[pentafluorozirconate (IV)] fluoride and vibrational spectra of its hafnium analogue

Monoclinic (N₂H₆)₃Zr₂F₁₃·F crystallizes in space group P2₁-C ₂ ² (No. 4) with unit cell dimensionsa=5.670(1),b=10.984(2),c=10.601(2) Å,=93.88(1)°,V=658.7(4) ų andZ=2. Two different types of N₂H₆ ²⁺ ions are present. One is involved in strong H-bonds to F^– ions in infinite chains running along the a axis (the shortest N-F distance is 2.437(5) Å), and the other links the structure through weaker bi- and trifurcated H-bonds to fluorine ligands of the Zr₂F₁₃ ^5– ions. The N-N bond lengths range from 1.430(5) to 1.446(5) Å with apparently no meaningful correlation to the type of N₂H₂ ²⁺ ions. The Zr₂F₁₃ ^5– ions have very nearly C₂ point symmetry and are formed by joining two distorted bicapped trigonal prisms of ZrF₈-units through a common face. Distances of Zr-F terminal bonds range from 2.015(2) to 2.112(2) Å and of bridging bonds from 2.133(2) to 2.212(2) Å. (N₂H₆)₃Hf₂F₁₃·F is isomorphous. The vibrational spectra of the two compounds are nearly identical, with the exception of a strong infrared band, which is assigned to a stretching mode with the moving central atom within the anion. The anion part of the spectrum is simple, showing broad unresolved bands. The cation part shows two types of N₂H₆ ^– ions. H-Bonding is strongly present in the spectra, but no simple correlations with the H-bond strength is evident.     

On precipitation effects of aluminum,lanthanum, iron (III), and thorium phosphates

Summary Typical precipitation curves of various metal phosphates have been obtained using the turbidimetric technique. The following systems have been investigated: Al(NO₃)₃-K₃PO₄, Al(NO₃)₃-KH₂PO₄, Al(NO₃)₃NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃-(NH₄)₂HPO₄, FeCl₃K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃-NaH₂PO₄, La(NO₃)₃K₃PO₄,La(NO₃)₃-K₂HPO₄,La(NO₃)₃-KH₂PO₄,La(NO₃)₃NaH₂PO₄ and Th(NO₃)₄-K₂HPO₄. Typical precipitation curves indicated concentration ranges of phosphate precipitation and of complex solubility.

---

Zusammenfassung Typische F?llungskurven verschiedener Metallphosphate, die mittels Trübungsmessungen erhalten wurden, wurden graphisch dargestellt. Die folgenden Systeme wurden untersucht: Al(NO₃)₃-K₃PO₄,Al(NO₃)₃KH₂PO₄, Al(NO₃)₃-NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃(NH₄)₂HPO₄, FeCl₃-K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃NaH₂PO₄, La(NO₃)₃-K₃PO₄, La(NO₃)₃-K₂HPO₄, La(NO₃)₃-KH₂PO₄, La(NO₃)₃-NaH₂PO₄ und Th(NO₃)₄K₂HPO₄. Typische F?llungskurven zeigten Konzentrationsgebiete, in welchen die Metallphosphate gef?llt werden, sowie Konzentrationen, die zur Komplexbildung führten.

---

---

Supported in part by the U.S. Army Research Office, Contract No. DA-ORD-10.     

On-line coupling of sequential injection extraction with restricted-access materials for sample clean-up and analysis of drugs in biological matrix

In this contribution, the on-line coupling of solid phase extraction (SPE), based on a restricted-access material (RAM), with sequential injection technique (SIA) for the analysis of biological samples, is described. The SIA-RAM system was tested with a new potential antileucotrienic drug (VUFB-19363 (Quinlukast)) for serum analysis. The method is based on SPE with the novel internal-surface reversed-phase column packing material-alkyl-diol silica (ADS). The supports tolerate direct and repetitive injection of proteinaceous fluids (plasma, serum) and allow reversed-phase partitioning at the internal surface. A column packed with a 25 microm C18 alkyl-diol support was used for direct serum injection. Using a 6-port selection valve and the system of three mobile phases, the polar matrix compounds and metabolites are removed by sequentially aspirated mobile phases with lower content of the organic part (methanol-water (2:98) and following acetonitrile-water (20:80)) to the waste, and then, the analyte enriched on the column is eluted by a strong mobile phase (acetonitrile-methanol-water (40:20:40)) to the UV detector without transfer loss. With the fully automated SIA system, a total analysis time of less than 10 min was achieved. The only off-line sample pre-treatment step required to remove particulate matter was centrifugation. The studies showed a range of linearity (2-40 microg ml(-1)) and a high recovery (93.6-96.8%) of drug from the biological matrix with coefficients of variation (RSD) less than 5.0% (n = 6). This paper introduces a new, simple and robust analytical technique suitable for screening determination and direct analysis of drugs in biological materials.     

Site-specific phenylation of pyridine catalyzed by phosphido-bridged ruthenium dimer complexes: a prototype for C-H arylation of electron-deficient heteroarenes

Direct and selective catalytic arylation of alpha-C-H bond in pyridine with iodobenzene was achieved in up to 70% yield. Phosphido-bridged bisruthenium complexes 6a and 6b arising from Ru3(CO)12 and PPh3 were identified as active catalysts. The formation of complexes 6a and 6b was investigated, a sequence of C-H and C-P bond cleavage, cluster fragmentation, and disproportionation was established, and the intermediate ruthenium complexes lying on this pathway were isolated and fully characterized.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.     

Selective C-arylation of free (NH)-heteroarenes via catalytic C-H bond functionalization

A new system for palladium-catalyzed arylation of a broad spectrum of free (NH)-heteroarenes has been developed (indole, pyrrole, pyrazole, 2-phenylimidazole, imidazole, benzimidazole, and purine). Remarkable selectivity has been achieved in the presence of MgO base, providing single C-arylation products, while no N-arylation and no bis-arylation products have been detected. In the case of free imidazole, exclusive C-4 arylation may be switched to exclusive 2-arylation by the addition of CuI to the Pd/Ph3P/MgO system. When free aryl-(NH)-azoles are desired, direct arylation eliminates three steps in comparison to standard methods, including N-protection, stoichiometric metalation or halogenation, and N-deprotection.     

Infrared spectroscopic evidence for Π back-bonding in molecular adducts of pyridine

The observation of the dependence of the in-phase, out-of-plane CH bending on π electron density in aromatics made by Kross was applied to pyridine molecular complexes. Comparison of systems with and without possible back bonding and the existence of a series resembling the Irving-Williams' series, assert the π back bonding to be responsible for the behaviour of the pyridine “umbrella” band.