Nafion-PAN optical chemical sensor: optimization by FIA

A copper-sensitive optical chemical sensor (optrode) is described. The optrode is based on a Nafion membrane and an immobilized organic ligand coupled with a flow injection (FI) system. The FI system includes a flow-through removable measuring cell and a simple spectrophotometer. Owing to the miniature size of the system and the efficient use of optical fibers, this optrode is well suited for monitoring environmental water samples. The success of the described optrode system depends on the effectiveness of the FI reagent delivery system. Optimum contact time with the membrane (as determined by the reagent flow rates) and the injected sample volume are critical. Environmental water samples were analyzed for copper content using the optimized optrode system. To validate the optrode's performance, the same water samples were analyzed using the atomic absorption spectrophotometer.     

The use of a polymer inclusion membrane in a paper-based sensor for the selective determination of Cu(II)

A disposable paper-based sensor (PBS) is described for the determination of Cu(II) in natural and waste waters at approximately 2 cents per measurement. The device makes use of a polymer inclusion membrane (PIM) to provide the selectivity for Cu(II). The PIM consists of 40 wt% di(2-ethlyhexyl) phosphoric acid (D2EHPA) as the carrier, 10 wt% dioctyl phthalate (DOP) as a plasticizer, 49.5 wt% poly(vinyl chloride) (PVC) as the base polymer and 0.5 wt% (m m⁻¹) 1-(2′-pyridylazo)-2-naphthol (PAN) as the colourimetric reagent. High selectivity under mildly acidic conditions (HCl, pH 2.0) is achieved for Cu(II) in the presence of frequently encountered metal ions in natural and waste waters such as Fe(III), Al(III), Zn(II), Cd(II), Pb(II), Ca(II), Mg(II), and Ni(II).     

Nafion-based optical sensor for the determination of selenium in water samples

An optical chemical sensor responsive to selenium (SeO₃²⁻) in water samples was developed. Its matrix was nafion membrane suffused with an organic ligand p-amino-p’-methoxydiphenylamine or variamine blue (VB). The method of analysis was flow injection (FI) where in the membrane was fixed in a flow-through demountable measuring cell and connected to a computer-controlled simple spectrophotometer.

Variamine blue was previously established to determine amounts of selenium in water and other media by means of a spectrophotometer. The method involved reacting selenite with potassium iodide to generate iodine gas, which reacts with variamine blue to form a colored species.

Experimental results showed the optrode to be an effective tool in analyzing the selenium content of water samples particularly for remote or in situ applications. Interference studies proved that the method is free of intervention from tested ions.     

材料细观结构与构件宏观响应间直接关联分析

本文探讨一种用于材料细观结构与构件宏观响应之间的直接关联分析方法。该方法应用宏现计算,给出细观力学量,并可反映材料细观结构特征,适用于具有细观结构材料制成构件的力学分析。     

热辐射应力图像分析确定裂纹尖端塑性区

本文借助于热辐应力图像分析技术记录了铝质紧养伤拉伸试件的热辐射应力图像。根据裂尖周围温度变化曲线的分布规律确定其特征区的,从而得以裂尖塑性区的开头曲线,并与理论值比较,符合良好。对裂纹扩展面进行ＳＥＭ分析,得出该试件的断裂特性,对于进行细观损伤研究有重要的意义。     

Multiple periodic solutions for a nonlinear suspension bridge equation

We investigate nonlinear oscillations in a fourth-order partialdifferential equation which models a suspension bridge. Previouswork establishes multiple periodic solutions when a parameterexceeds a certain eigenvalue. In this paper, we use Leray-Schauderdegree theory to prove that if the parameter is increased further,beyond a second eigenvalue, then additional solutions are created.     

On-line preconcentration and speciation of arsenic by flow injection hydride generation atomic absorption spectrophotometry

A flow injection-column preconcentration-hydride generation atomic absorption spectrophotometric (FI-column-HGAAS) method was developed for determining μg/l levels of As(III) and As(V) in water samples, with simultaneous preconcentration and speciation. The speciation scheme involved determining As(V) at neutral pH and As(III + V) at pH 12, with As(III) obtained by difference. The enrichment factor (EF) increased with increase in sample loading volume from 2.5 to 10 ml, and for preconcentration using the chloride-form anion exchange column, EFs ranged from 5 to 48 for As(V) and 4 to 24 for As(III + V), with corresponding detection limits of 0.03-0.3 and 0.07-0.3 μg/l. Linear concentration range (LCR) also varied with sample loading volume, and for a 5-ml sample was 0.3-5 and 0.2-8 μg/l for As(V) and As(III + V), respectively. Sample throughput, which decreased with increase in sample volume, was 8-17 samples/h. For the hydroxide-form column, the EFS for 2.5-10 ml samples were 3-23 for As(V) and 2-15 for As(III + V), with corresponding detection limits of 0.07-0.4 and 0.1-0.5 μg/l. The LCR for a 5-ml sample was 0.3-10 μg/l for As(V) and 0.2-20 μg/l for As(III + V). Sample throughput was 10-20 samples/h. The developed method has been effectively applied to tap water and mineral water samples, with recoveries ranging from 90 to 102% for 5-ml samples passed through the two columns.