Crosslinked poly(N-isopropylacrylamide) gel for electrophoretic separation and recovery of substances

Crosslinked poly(N-isopropylacrylamide) gel was tested on the feasibility for a preparative electrophoretic matrix. Horse heart myoglobin and bovine hemoglobin were well separated on the gel matrix electrophoretically by molecular sieving effect of the gel network. Relative mobilities of those proteins in the gel were larger than those in a crosslinked polyacrylamide gel of the same polymer concentration. After the separation, the protein-containing portion of the gel underwent swelling at 4°C and deswelling at 37°C, alternatively. As a result of the deswelling, each protein was recovered in a discharged solution out of the gel at almost 100% yield.     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

The preparation of nano‐scope chitosan‐oligomer copper complexes and their interaction with DNA

Water‐soluble low molecular weight chitosan of nanometer level and its copper complexes were prepared, and characterized by IR spectra, elemental analysis and gel permeation chromatography (GPC). The modes and mechanism of these copper complexes interaction with DNA were studied by a fluorescent probe method and electrophoresis analysis. It is suggested that there are electrostatic and intercalation modes of copper complexes interacting with DNA. At first, the cationic complex electrostaticly binds to the negatively charged phosphate backbone of DNA, and then a portion of the complex intercalates between the base pairs on the DNA duplex strand. Copyright © 2005 John Wiley & Sons, Ltd.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Thermolysis of reactive oligo(p-phenylene sulfide) containing disulfide bond

Oligo(phenylene sulfide) (OPS) containing one disulfide bond at the end of the chain, which was obtained by the oxidative polymerization of diphenyl disulfide, had a relatively low Td_10%(temperature for 10% weight loss) of 412 °C because of degradation of the disulfide bond. But this thermal cleavage of the disulfide bond promoted the curing reaction through thiophenoxy radical formation. OPS was allowed to react with diiodobenzene at 220 °C. The thermal stability of OPS was improved through the consumption of the disulfide bond and the coupling of the chain.     

Enhancement of electronic excitation energy transfer in the colloidal crystals of colloidal silica suspensions doped with fluorescent dyes

The efficiency of electronic excitation energy transfer from photo-excited rhodamine 110 (Rh110, energy donor) to rhodamine B (RhB, energy acceptor) in an exhaustively deionized colloidal silica suspension has been studied. This colloidal suspension shows Bragg reflection due to the formation of colloidal crystals and the Bragg-peak wavelength is controllable by the volume fraction of the silica spheres. When the Bragg-peak wavelength matches with the fluorescence band of Rh110, a depletion was observed in the Rh110 fluorescence spectrum. This means the fluorescence of Rh110 is partially trapped due to the Bragg reflection inside the crystal lattice. In the coexistence of RhB, the enhancement of RhB fluorescence intensity was observed. These facts clearly indicate the trapped photon energy of Rh110 is efficiently transferred to RhB within the colloidal crystals. The quantitative measurements showed that the enhancement of the transfer efficiency is 20% (or slightly more) in the present experimental conditions.     

Gamma-ray polymerization of phospholipids having diene or triene groups as liposomes

Small unilamellar liposomes were prepared in an aqueous medium by the sonication of phospholipids containing diene or triene groups in their hydrocarbon acyl chains. These liposomes were polymerized by gamma-ray irradiation. Conversion of polymerization was successively followed by UV spectrometry. Diene-type lipid liposomes were revealed for which a gamma-ray dose of 0.8 Mrad was required for complete polymerization and which were polymerized more easily than triene-type lipid liposomes. Triene-type lipids required 2.3 Mrad gamma ray to polymerize them completely. Contrary to UV-irradiation polymerization, there was no concentration dependence on the polymerization. Structure of the polymerized liposomes were confirmed by electron microscopy as small unilamellar liposomes. Study on the leakage of fluorescein from inner aqueous phase of the polymerized liposomes revealed that polymerized triene-type liposomes were relatively more stable than the polymerized diene-type liposomes.     

Correlation between Site ll-Specific Human Serum Albumin (HSA) Binding Affinity and Murine in vivo Photosensitizing Efficacy of Some Photofrin Components

Human serum albumin (HSA) is one of the key components in human blood that may influence drug distribution. As such, it is important to know the affinity of any drug for albumin. Previously, Photofrina mixture of monomeric, dimeric and oligomeric porphyrins, has been subjected to HSA binding studies. However, due to its complex nature, binding studies on Photofrin or other hematoporphyrin derivatives with HSA are inconclusive. In this report, the binding properties of some components (dimers and trimers) of Photofrin® and the relationship between murine photosensitizing efficacy and those binding properties were investigated. The interaction of these porphyrins with HSA was investigated by direct ultrafiltration and fluorescent titration techniques with fluorescent probes such as dansyl-L-proline (DP), which is known to interact selectively with site II on HSA. Porphyrins also were tested for antitumor activity in a mouse model following intravenous administration and exposure to laser light. Together, the results suggest that the photosensitizers that were preferentially bound to site II of HSA were most effective at controlling murine tumor regrowth     

Structural and Magnetic Study of N2, NO,NO2, and SO2 Adsorbed within a Flexible Single‐Crystal Adsorbent of [Rh2(bza)4(pyz)]n

The crystalline one‐dimensional compound, [Rh^II₂(bza)₄(pyz)]_n ( 1 ) (bza=benzoate, pyz=pyrazine) demonstrates gas adsorbency for N₂, NO, NO₂, and SO₂. These gas‐inclusion crystal structures were characterized by single‐crystal X‐ray crystallography as 1 ?1.5 N₂ (298 K), 1 ?2.5 N₂ (90 K), and 1 ?1.95 NO (90 K) under forcible adsorption conditions and 1 ?2 NO₂ (90 K) and 1 ?3 SO₂ (90 K) under ambient pressure. Crystal‐phase transition to the P space group that correlates with gas adsorption was observed under N₂, NO, and SO₂ conditions. The C2/c space group was observed under NO₂ conditions without phase transition. All adsorbed gases were stabilized by the host lattice. In the N₂, NO, and SO₂ inclusion crystals at 90 K, short interatomic distances within van der Waals contacts were found among the neighboring guest molecules along the channel. The adsorbed NO molecules generated the trans‐NO???NO associated dimer with short intermolecular contacts but without the conventional chemical bond. The magnetic susceptibility of the NO inclusion crystal indicated antiferromagnetic interaction between the NO molecules and paramagnetism arising from the NO monomer. The NO₂ inclusion crystal structure revealed that the gas molecules were adsorbed in the crystal in dimeric form, N₂O₄.     

Polyamine polymers from active hydrogen compounds,formaldehyde, and amines

Active hydrogen compounds such as hydroquinone (HQ), cyclohexanone (CH), acetophenone (AP), and 4,4′-methylene bis-N-methylaniline (MNA) polymerized with formaldehyde (F) and secondary diamines to produce Mannich base polyamine polymers. The HQ-containing polymers were oxidized to benzoquinone (BQ)-containing polymers and their redox properties were investigated in the desulfurization of hydrogen sulfide.