Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Muonium in silicon tetrachloride

Muonium in liquid SiCl has been observed for the first time at low temperature (−65°C) The observed polarization of muonium is as much as 25% of the total spin polarization and shows a fast relaxation rate.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

The cellulose system in viscin from mistletoe berries

The cellulose system of the viscous fibrous cellulosic polysaccharide (viscan) in the viscin tissue of the European mistletoe, Viscum album L., was analyzed by chemical and physicochemical techniques including sugar analysis, optical and transmission electron microscopy, X-ray and electron diffraction together with solid state CP/MAS ¹³C-NMR spectroscopy. The results confirmed that in the elongated thin viscin cells, the cellulose microfibrils (having a diameter of around 3 nm) were tightly coiled with their axes perpendicular to the long axis of the cell. Upon stretching these cells became deformed by more than a hundred fold. In such a deformation, the cellulose microfibrils became unwound to be perfectly aligned along the stretching direction. Based on solid-state CP/MAS ¹³C-NMR spectroscopic analysis of the viscin tissue, it was found that its cellulose consisted of I and I polymorphs in the ratio 1:1.     

Studies on antiallergic agents. I. Synthesis and antiallergic activity of novel pyrazine derivatives.

Various pyrazine derivatives were synthesized and their antiallergic activity was examined. The inhibitory activity on allergic histamine release of the compounds bearing a 5-tetrazolyl group was more potent than that of the corresponding carboxyl derivatives. The introduction of -CONH- or -NHCO- between the pyrazine ring and the 5-tetrazolyl group as a spacer greatly enhanced the activity. N-(1H-Tetrazol-5-yl)-2-pyrazinecarboxamide (I-3) was estimated to exhibit nearly the same potency as disodium cromoglycate (DSCG). The structure-activity relationship among various derivatives modified by introducing some substituents onto the 3-, 5- or 6-position of the pyrazine ring of I-3 was investigated. The activity remained unchanged or was reduced when such substituents as methyl, chloro, methoxy, methylamino and dimethylamino were introduced at the 3- or 5-position. In contrast, 6-substitution with various alkylamino groups more or less increased the activity. Among them, the 6-dimethylamino (I-17c) and 6-(1-pyrrolidinyl) (I-34) derivative were proved to be most potent. The IC50 values (concentration which produces 50% inhibition of the allergic histamine release) of I-17c and I-34 were determined to be 4.7 x 10(-10) and 4.6 x 10(-10) M, respectively. These two compounds produced a potent inhibitory activity on passive cutaneous anaphylaxis (PCA) in rat, not only by the intravenous route (ED50 = 0.0096 mg/kg for both compounds) but also by the oral route (ED50 = 0.19 and 0.18 mg/kg, respectively). On the other hand, when the pyrazine ring of some representative compounds was replaced with a pyridine ring, the inhibitory activity on histamine release was significantly reduced.