Luminescence centers in porous silicon

Photoluminescence studies on porous silicon show that there are luminescence centers present in the surface states. By taking photoluminescence spectra of porous silicon with respect to temperature, a distinct peak can be observed in the temperature range 100–150 K. Both linear and nonlinear relationships were observed between excitation laser power and the photoluminescence intensity within this temperature range. In addition, there was a tendency for the photoluminescence peak to red shift at low temperature as well as at low excitation power. This is interpreted as indicating that the lower energy transition becomes dominant at low temperature and excitation power. The presence of these luminescence centers can be explained in terms of porous silicon as a mixture of silicon clusters and wires in which quantum confinement along with surface passivation would cause a mixing of andX band structure between the surface states and the bulk. This mixing would allow the formation of luminescence centers.     

Ln(Ln=Y/Gd)VO4:Er3+/Nd3+的制备及发光性能

采用高温固相法制备了Ln（Ln=Y／Gd）VO4掺Er^3＋或Nd^3＋的近红外发光材料。通过X射线粉末衍射（XRD）和光致发光（PL）对样品进行了表征。结果表明：所得产品结晶良好，属于四方晶系，锆石结构。研究了Er^3＋，Nd^3＋的含量、煅烧时间、煅烧温度等对材料近红外发光性质的影响。在Ln（Ln=Y／Gd）VO4：Er^3＋／Nd^3＋中，存在明显的从VO4^3-向Er^3＋／Nd^3＋的能量传递。两种不同的LnVO4（Ln=Y／Gd）基质对发光性质也有一定的影响。小浓度Bi^3＋的掺人可以明显提高YVO4：Er^3＋／Nd^3＋的近红外发光强度。     

Electrospun Porous NiCo2O4 Nanotubes as Advanced Electrodes for Electrochemical Capacitors

Novel, porous NiCo₂O₄ nanotubes (NCO‐NTs) are prepared by a single‐spinneret electrospinning technique followed by calcination in air. The obtained NCO‐NTs display a one‐dimensional architecture with a porous structure and hollow interiors. The effect of precursor concentration on the morphologies of the products is investigated. Due to their unique structure, the prepared NCO‐NT electrode exhibits a high specific capacitance (1647 F g^?1 at 1 A g^?1), excellent rate capability (77.3 % capacity retention at 25 A g^?1), and outstanding cycling stability (6.4 % loss after 3000 cycles), which indicates it has great potential for high‐performance electrochemical capacitors. The desirable enhanced capacitive performance of NCO‐NTs can be attributed to the relatively large specific surface area of these porous and hollow one‐dimensional nanostructures.     

Quasi-phase-matched generation of tunable blue light in a quasi-periodic structure

We present what is to our knowledge a new approach to generating tunable blue light by cascaded nonlinear frequency conversion in a single LiTaO3 crystal. Simultaneous quasi-phase matching of an optical parametric generation process and a sum-frequency mixing process is achieved by means of structuring the crystal with a quasi-periodic optical superlattice. The spectral (wavelength tuning and bandwidth) and power characteristics of the blue-light generation are studied with a fixed-wavelength 532-nm picosecond laser and a wavelength-tunable nanosecond optical parametric oscillator (OPO) as the pump sources. By tuning the OPO wavelength, we could tune the blue output over approximately 20 nm. Temperature tuning of the blue output at a fixed pump wavelength of 532 nm was limited to approximately 1.5 nm. A maximum blue power of 15 microW was generated at a pump power of 0.5 mW, corresponding to an efficiency of 3%.     

3,4,9,10-Perylenetetracarboxylicdiimide as an interlayer for ultraviolet organic light emitting diodes

Ultraviolet organic light emitting diodes with 3,4,9,10-perylenetetracarboxylicdiimide (PTCDI) interlayer have been achieved. The emission spectrum and intensity were strongly dependent on the thickness of PTCDI interlayer, in spite of the fact that PTCDI has neither much lower HOMO nor much higher LUMO level, which is considered necessary for efficient charge blocking layers. The influence of PTCDI layer was investigated in three different device configurations and obtained results are discussed. For optimal device configuration, OLED with emission centered at 370 nm and turn-on voltage of 4.5 V is obtained.     

Low temperature quenching and high efficiency Tm, La or Tb co-doped CaSc2O4:Ce phosphors for light-emitting diodes

Low temperature quenching and high efficiency CaSc₂O₄:Ce³⁺ (CSO:Ce³⁺) phosphors co-doped with Tm³⁺, La³⁺ and Tb³⁺ ions were prepared by a solid state method and the phase-forming, morphology, luminescence and application properties of these phosphors were investigated. The results showed that co-doping of Tm³⁺, La³⁺ and Tb³⁺ ions can improve the luminescence properties and decrease temperature quenching of CSO:Ce³⁺ phosphor remarkably. High efficiency green-light-emitting diodes were fabricated with the prepared phosphors and InGaN blue-emitting (∼460 nm) chips. The good performances of the green-light-emitting LEDs made from co-doped CSO:Ce³⁺ phosphors confirm the luminescence enhancement and indicate that Tm³⁺, La³⁺ and Tb³⁺ co-doped CSO:Ce³⁺ phosphors are suitable candidates for the fabrication of high efficiency white LEDs.     

Emission characteristics of inorganic/organic hybrid white-light phosphor

A white-light light-emitting diode (LED) was successfully fabricated by converting near-UV LED emission (390–420 nm) with a new inorganic/organic hybrid phosphor. This new white-light phosphor consisted of three fluorescence materials; two strontium aluminates based with lanthanide oxides, SrAl₂O₄:Eu²⁺ (for green (520 nm) emission) and Sr₄Al₁₄O₂₅:Eu²⁺ (for blue (490 nm) emission) and a new organic Eu metal complex, Eu(BTFA)₃phen (for red (614 nm) emission). These materials have good absorption in the 300–500-nm range and have high quantum efficiencies (4.7–24.5%). The white phosphor has a CIE value of (0.321, 0.365). PACS 42.70.-aj; 78.40.-q; 78.55.-m; 81.05.Lg     

Design, synthesis, characterization, luminescence and non-linear optical (NLO) properties of multinuclear platinum(II) alkynyl complexes

A series of luminescent multinuclear platinum(II) alkynyl complexes containing triethynylbenzene or 1,4-bis(3,5-diethynylphenyl)buta-1,3-diyne as cores has been successfully synthesized and characterized. The electronic absorption, emission, nanosecond transient absorption and electrochemical properties of these complexes have been reported. These complexes show long-lived emissions in degassed benzene solution and in alcoholic glass at 77 K. Moreover, they are found to exhibit two-photon absorption (2PA) and two-photon induced luminescence (TPIL) properties, and their two-photon absorption cross-sections have been determined to be 6-191 GM upon excitation at 720 nm. Through a systematic comparison, it has been found that tetra- and hexanuclear platinum(II) complexes show better 2PA and TPIL properties than their di- and trinuclear counterparts.