Fine Dry Grinding of Zeolite in a Laboratory Ball Mill

This paper presents the importance and usage of natural zeolites, which was recently recognized in the industry. Therefore, the grinding properties of natural zeolite were studied with the emphasis on a kinetic study in a ball mill. The experimental mill employed was laboratory sized, 200 mm diameter, 191 mm length, providing a total mill volume of 6000 cm³, with a total mass of 5.62 kg of steel balls of 25 mm diameter with a charge of 20% of the mill volume and with a rotation speed of 76 rpm. The breakage parameters were determined by using single sized feed fractions of ?850+600 μm, ?600+425 μm, and ?425+300 μm for the zeolite samples. The S_i (specific rate of breakage) and B_{i, j} (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. From the experimental results, S_i values increased as the feed sizes became coarser, i.e., the highest S_i value was 0.85 min^?1 for ?850+600 μm, while the lowest S_i value was 0.65 min^?1 for ?425+300 μm feed ground in the mill. The B_{i, j} values obtained for the zeolite sample were γ=0.84, ?=0.61, and β=4.25. The breakage parameters obtained showed that the zeolite is broken faster than quartz and slower than calcite and barite in terms of the a_T values reported previously at the same experimental conditions. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The slowing‐down effect was also seen in the mill after 4 min. of grinding.     

Characterization of active sites over reduced Ni-Mo/Al(2)O(3) catalysts for hydrogenation of linear aldehydes

Reduced Ni-Mo/Al(2)O(3) catalysts exhibit a behavior analogous to that of sulfided Ni-Mo/Al(2)O(3) catalysts in hydrogenation of linear aldehydes to alcohols. Similar to what has been previously reported for sulfided catalysts, NO and CO(2) can be used over the reduced Ni-Mo catalysts as probe molecules for the active sites responsible for two competing reactions -- aldehyde hydrogenation to alcohols and condensation reactions to heavy products, respectively. Reduced catalysts have a higher aldehyde conversion activity and alcohol selectivity than their sulfided counterparts. The reduction temperature has a strong effect on the surface density of anion vacancies, which are responsible for alcohol formation. Reduction temperature also plays a role in determining the abundance of OH groups on the alumina surface. The effect of reduction temperature also manifests itself through the differences seen in the oxidation states of Mo and Ni species.     

Determination of the critical surface tension of wetting of minerals treated with surfactants by shear flocculation approach

This paper contributes the shear flocculation method as a new approach to determine the critical surface tension of wetting of minerals treated with surfactants. This newly developed approach is based on the decrease of the shear flocculation of the mineral suspension, with decreasing of the surface tension of the liquids used. The solution surface tension value at which shear flocculation does not occur can be defined as the critical surface tension of wetting (gamma c) of the mineral. By using the shear flocculation method, the critical surface tensions of wetting (gamma c) for calcite and barite minerals, treated with surfactants, were obtained as 30.9 and 35.0 mN/m, respectively. These values are in good agreement with data reported previously on the same minerals obtained by the contact angle measurement and flotation methods. The chemical agents used for the treatment of calcite and barite particles were sodium oleate and sodium dodecyl sulfate, respectively.     

Development of chromium-free iron-based catalysts for high-temperature water-gas shift reaction

Chromium-free iron-based catalysts were prepared and studied in regard to their performance in the high-temperature water-gas shift reaction (HTS). The effects of various catalyst preparation variables (i.e., Fe/promoter ratio, pH of precipitation medium, calcination and reduction temperatures) and preparation methods were investigated. Aluminum is a potential chromium replacement in HTS catalysts. Further improvement in WGS activity of Fe–Al catalysts can be achieved by the addition of small amounts of copper or cobalt. Catalysts were characterized using BET surface area measurements, temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). As a textural promoter, aluminum and chromium prevent the sintering of iron oxides and stabilize magnetite phase by retarding its further reduction to FeO and metallic Fe. The promotional effect of Cu is found to be strongly dependent on the preparation method.     

bis(nicotinamide) and bis(N,N-diethyl nicotinamide) p-hydroxybenzoate complexes of Ni(II), Cu(II) AND Zn(II)

The mixed-ligand p-hydroxybenzoate complexes of Ni(II), Cu(II) and Zn(II) with nicotinamide and N,N-diethylnicotinamide were synthesized and characterized by elemental analysis, magnetic susceptibility measurements and mass spectrometry. The thermal behavior of the complexes was studied by simultaneous TG, DTG and DTA methods in static air atmosphere. The infrared spectral characteristics of the complexes are also discussed. The complexes contain two water molecules, two p-hydroxybenzoato (p-hba) and two nicotinamide (na) (or diethylnicotinamide (dena)) ligands per formula unit. In these complexes, all ligands are coordinated to the metal ion as monodendate ligands. In Zn(II)-na and Cu(II)-dena complexes, thep-hydroxybenzoate behaves as bidentate chelating ligand through carboxylic oxygen atoms. The decomposition pathways and the stability of the complexes are interpreted in the terms of the structural data. The final decomposition products were found to be the respective metal oxides. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hydrogen bonding and dimeric self-association of 2-pyrrolidinone: An ab initio study

Ab initio calculations on the different associated structures of 2-pyrrolidinone with water and with itself were carried out using 3-21G and 6-31G^* basis sets at the Hartree–Fock level, including electron correlation using second-order Møller–Plesset perturbation theory. The calculated free energy changes for the intermolecular hydrogen bonded dimer and hydrated species indicated that the molecular systems with cyclic dimerization and association with two water molecules are dominant. The results are compared to the available experimental data in the literature.     

Simultaneous Determination of Abacavir,Efavirenz and Valganciclovir in Human Serum Samples by Isocratic HPLC-DAD Detection

A rapid, sensitive, and specific reverse phase high performance liquid chromatography with diode array detection procedure for the simultaneous determination of abacavir, efavirenz and valganciclovir in spiked human serum is described. Separation was performed on a 5 μm Waters Spherisorb column (250 × 4.6 mm ID) with acetonitrile: methanol:KH₂PO₄ (at pH 5.00) (40:20:40 v/v/v) isocratic elution at a flow rate of 1.0 mL min⁻¹. Calibration curves were constructed in the range of 50–30,000 ng mL⁻¹ for abacavir and efavirenz, and 10–30,000 ngmL⁻¹ for valganciclovir in serum samples. The limit of detection and limit of quantification concentrations of the HPLC method were 3.80 and 12.68 ng mL⁻¹ for abacavir, 2.61 and 8.69 ng mL⁻¹ for efavirenz, 1.30 and 4.32 ng mL⁻¹ for valganciclovir. The method has been applied, without any interference from excipients or endogenous substances, for the simultaneous determination of these three compounds in human serum.

     

New Approaches to Synthesizing Electroactive Polymers

The chemical oxidative polymerization of aniline in a heterophase system is studied. In the presence of a solid substrate, the aniline polymerization involves two kinetically and chemically independent processes, namely, the polymerization in the bulk solution and at the substrate surface. The growth of the polyaniline coating at the substrate surface includes three successive processes: interfacial polymerization, adsorptive polymerization, and destruction of the polymer chain. The interfacial oxidative polymerization of diphenylamine and phenothiazine is examined. The yield and chemical structure of polymers is shown to depend on the polymerization conditions.     

Anodic voltammetric behavior of ascorbic acid and its selective determination in pharmaceutical dosage forms and some Rosa species of Turkey

Ascorbic acid is the most common electroactive biological compound found in some plant species (e.g., Citrus species, Rosa species). The electrochemical oxidation of ascorbic acid was investigated by cyclic, linear sweep, differential pulse (DPV), and square wave (SWV) voltammetry. For analytical purposes, a very well-resolved diffusion-controlled voltammetric peak was obtained in acetate buffer at pH 3.50 for DPV and SWV. The linear response was obtained in the range of 3.52–176.1 μg/mL with a detection limit of 0.88 μg/mL for DPV and 0.52 μg/mL for SWV. Based on this study, simple, rapid, selective, and sensitive voltammetric methods were developed for the determination of ascorbic acid in pharmaceutical dosage forms and Rosa species (R. dumalis ssp. boissieri var. boissieri, R. canina, R. pulverulenta, R. heckeliana ssp. vanheurckiana, and R. montana subsp. woronowii). The results obtained are compared with the HPLC data. The developed methods enable the extracts to be analyzed without the necessity of any time-consuming separation. The text was submitted by the authors in English.