Amphiphilic thermoset elastomers from metal‐free,click crosslinking of PEG‐grafted silicone surfactants

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal‐free click reactions between azidoalkylsilicones and alkynyl‐modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl‐functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS‐g‐PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl‐terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1082–1093     

Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes

The preparation of discrete polyol based silane precursors derived from glycerol by a simple one-pot process is described. These polyol-based silanes could be hydrolyzed under mild pH conditions and upon gelation resulted in the formation of optically clear, monolithic, mesoporous silica. The hydrolysis and condensation reactions lead to cure rates that are very sensitive to ionic strength, but are almost unaffected by pH in contrast to those of alkoxysilanes derived from primary alcohols such as Si(OEt)₄. Residual glycerol in the silica monolith could be removed by washing, or could be left in the silica to reduce the magnitude of shrinkage during long term storage. The biocompatible glyceroxysilane precursors lead to materials that were able to retain the activity of entrapped enzymes over repeated cycles of use for periods of up to several months.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.     

Acylsilanes from the pyrolysis of silyl esters of α-ketoacids

The pyrolyses of silyl esters of pyruvic acid and phenylglyoxylic acid gave rise to acylsilanes in high yield. An intramolecular rearrangement involving an intermediate siloxycarbene is proposed to account for the reaction.     

Silicone-modified starch/protein microparticles: protecting biopolymers with a hydrophobic coating

Silicone-coated starch/protein (human serum albumin, HSA) microparticles were prepared by precipitation of a starch/HSA/DMSO/water (water-in-oil) emulsion into acetone containing a silicone: the silicone polymer was either unfunctionalized (SiMe₃ terminated, PDMS) or functionalized at its termini with Si(OEt)₃ groups (TES-PDMS). The microparticles of approximate diameter 2–7 μm were highly hydrophobic with advancing contact angles 115°. Over several minutes, however, the contact angle decreased to ca. 40–70°. Soxhlet extraction with water led to degradation of the microparticles, irrespective of the nature of their silicone coating, as evidenced by release of the protein from them. Intraperitoneal (IP) or gastric administration of the two different particles to mice, however, showed a clear difference between the two silicones. The microparticles coated with either PDMS or TES-PDMS led to very different immune responses. Oral administration of the microparticles prepared with functionalized silicone elicited a significant production of antibodies, whereas the particles prepared with the unfunctionalized silicone (PDMS) were only weakly active. By contrast, the IP results demonstrated that particles coated with PDMS elicited an immune response that was established much more rapidly than with the particles modified with TES-PDMS. It is proposed that the TES-PDMS forms a physically adhering film or covalent bond to the protein molecules, which serves to protect the microparticle from biological degradation in the gut and/or facilitates the microparticle/protein interaction with the immune system.     

Allylsilane‐Modified Amino Acids from the Claisen Rearrangement

The Claisen rearrangement of the N‐protected, silylated allyl glycinates 11 and 12 led to the formation of allyl/silyl‐functionalized amino acids 13 and 14 in yields up to 80%. The diastereoisomer ratio varied from 2 : 1 to 29 : 1 for 11mb , and from 2 : 1 to 46 : 1 (syn/anti) for 12mb , depending on reaction conditions, as shown by X‐ray crystallographic analysis of 14mb . The relationship between the size of the alkyl groups on the chlorosilane reagent (Me₂R″SiCl, R″=Cl, Me, t‐Bu, Ph) used as an enolate trap and the observed stereoselectivity was investigated in the case of the Ireland–Claisen variant. Me₃SiCl gave the best results. However, the size of the alkyl groups on the silylated ester (Me₂R″Si, R=Me, t‐Bu, Ph, i‐Pr) did not exert a significant effect on the diastereoselectivity or yield of the rearrangement.     

Production off2(1270) andf0(975) mesons by photons and hadrons of energy 65–175 GeV

Measurements are reported of inclusive production of -mesons in the beam fragmentation region in p, p andKp collisions. Results include a small but significant departure from VMD, and a pronounced rise in the/ ⁰ ratio with increasingp _T .     

The Activation of Imines to Nucleophilic Attack by Grignard Reagents

The reaction of trimethylsilyl trifluoromethanesulfonate (trimethylsilyl triflate, TMSOTf) with imines leads to the formation of N-trimethylsilyliminium salts which react efficiently with soft nucleophiles to form secondary amines.     

High-Throughput Synthesis and Characterization of Aryl Silicones by Using the Piers–Rubinsztajn Reaction

Arylsilicones are widely exploited for their thermal and optical properties. The creation of phenylsilicone elastomers with specific physical properties is typically done by a “one-off” formulation and test process. Herein, it is demonstrated that high-throughput synthesis methods can be used to rapidly prepare a series of arylsilicone elastomers and then the relative impact of different aryl groups on their physical properties is assessed. Aromatic groups were incorporated into polydimethylsiloxane (PDMS) elastomers by exploiting the relative reactivity of different functional groups in the Piers–Rubinsztajn reaction. To analyze trends in the silicone mechanical properties as a function of increasing aryl concentration—structure/property relationships—libraries of elastomers were both quickly synthesized and characterized by using high-throughput suites starting from low viscosity silicone oils/monomers in 96-well plates. Liquid handling parameters were optimized to effectively work with the silicones. Incorporating aryl instead of alkyl crosslinkers into the PDMS backbone increased the silicone elastomer modulus by approximately 50 % (at a crosslink density of 6 %); elastomers prepared with an aromatic crosslinker with three contact points led to much higher moduli compared with those with one contact point at the same crosslink density. When located at precise rather than random points on the silicone chains, diphenylsilicones had lower moduli than analogous monophenylsilicones.