Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes

The preparation of discrete polyol based silane precursors derived from glycerol by a simple one-pot process is described. These polyol-based silanes could be hydrolyzed under mild pH conditions and upon gelation resulted in the formation of optically clear, monolithic, mesoporous silica. The hydrolysis and condensation reactions lead to cure rates that are very sensitive to ionic strength, but are almost unaffected by pH in contrast to those of alkoxysilanes derived from primary alcohols such as Si(OEt)₄. Residual glycerol in the silica monolith could be removed by washing, or could be left in the silica to reduce the magnitude of shrinkage during long term storage. The biocompatible glyceroxysilane precursors lead to materials that were able to retain the activity of entrapped enzymes over repeated cycles of use for periods of up to several months.     

Monte Carlo determinations of the beta dose rate to tooth enamel

The results of Monte Carlo simulations of the beta dose rate to enamel are presented. The dose rates are the most comprehensive to date, incorporating the beta spectrum from 21 different radionuclides, all internal conversion and Auger electrons, the majority of the bremsstrahlung radiation, effects due to radon loss in the uranium series, and variations in the moisture content of the sediment. Applications to a new dating technique in archaeology using electron spin resonance and beta-gradient isochrons are discussed.     

The electron ionization rate in multilayered semiconductor structures

We present theoretical results of the electron impact ionization rate in GaAs/AlGaAs multiquantum well structures as a function of applied electric field for various geometries, i.e., well and barrier widths. In addition, we present preliminary measurements of the current-voltage characteristics of MBE grown devices which demonstrate very low leakage current as well as sharp breakdwon behavior. It is found that the net ionization rate, determined by averaging over the constitutent GaAs and AlGaAs layers, approaches the weighted average of the constituent bulk rates at high electric field strengths; the potential discontinuity is relatively unimportant. The electron ionization rate within the well regions alone is still higher than that in bulk GaAs, but is insufficiently enhanced to compensate for the much lower rate in the AlGaAs layers. As the field is lowered to 250.0 kV/cm, the average ionization rate in the multiquantum well structure becomes larger than in the bulk.     

Screening of antagonists based on induced dissociation of a calmodulin-melittin interaction entrapped in a sol-gel derived matrix

Sol-gel derived materials offer a unique advantage for the development of sensing and screening platforms in that they allow for the entrapment of multiple species within a confined space. In this work, we show that it is possible to entrap an intact protein-peptide interaction, consisting of bovine calmodulin (bCaM) and melittin, into a sol-gel derived silicate material. Fluorescence emission data demonstrate that the entrapped complex behaves similarly to the complex in solution, and can undergo reversible dissociation upon introduction of the denaturant guanidine hydrochloride. Screening of antagonists of the bCaM-melittin complex was accomplished based on induced dissociation of the entrapped complex, which was followed by measuring the loss of sensitization of Tb(III) luminescence originating from energy transfer from the Trp of melittin to Tb(III) bound in the loops of bCaM. This study shows that entrapped protein-peptide complexes can be used as targets for drug screening or for fluorescence-based biosensing.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.     

Isothiazoles XI. Diels-alder adducts of 4-isothiazolin-3-one 1-oxides and 1,1-dioxides

4-Isothiazolin-3-one 1-oxides and 1,1-dioxides react with a variety of cyclic and acyclic dienes to afford cycloaddition products.     

Reagentless pH-based biosensing using a fluorescently-labelled dextran co-entrapped with a hydrolytic enzyme in sol-gel derived nanocomposite films

We report on the development of reagentless fluorescence-based sensing films utilizing hydrolytic enzymes co-entrapped with polymers that are labelled with pH sensitive fluorophores. Aqueous solutions of a hydrophilic enzyme (urease) or a lipophilic enzyme (lipase) containing fluorescein or carboxy-seminaphtharhodafluor-1 (SNARF-1), either free or conjugated to a dextran polymer backbone, were mixed with hydrolyzed alkoxysilane solutions and cast onto planar surfaces to form thin, biologically active sol-gel derived films (ca. 500 nm thick). The films also contained various additives, such as methyltrimethoxysilane, dimethyldimethoxysilane, polyethylene glycol or polyvinyl alcohol, to optimize the activity of the entrapped enzymes. The photostability, leaching, pK_a and pH response of the entrapped probes were characterized, as was the performance of the entrapped enzymes, and an optimal set of processing conditions was obtained for each different sensing film. In general, the results indicated that SNARF-labelled dextran was the most useful pH sensitive dye owing to insensitivity to leaching and photobleaching. Furthermore, it was observed that the pK_a and pH response of this probe was insensitive to preparation conditions. The performance of the co-entrapped enzymes was highly dependent on the type and level of additive, but in all cases, it was possible to obtain active enzymes with good performance characteristics. Reagentless sensing films for urea and glyceryl tributyrate (GTB) are demonstrated based on the detection of enzyme-mediated pH changes from films coated onto planar substrates.     

The Dyeing of Nylon and Cotton Cloth with Azo Dyes: Kinetics and Mechanism

The mechanism of the dyeing of cotton and nylon cloth by the azo dyes Orange G and Sunset Yellow FCF was investigated using a channel flow cell. The variation in dyeing with flow rate was found to proceed via a mechanism in which the flux of dye entering the cloth relative to the flux of dye to the cloth surfacedecreasedwith increasing flow rate. A mechanism is deduced in which the dye passes from bulk solution, through a porous surface layer within the cloth, before passing into the bulk cloth. Adsorption onto surface sites in this porous layer blocks the passage of further dye into the cloth. Kinetic parameters for such a mechanism are given.