The influence of the shape of Au nanoparticles on the catalytic current of fructose dehydrogenase

Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer–limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer–limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (k_S) were found to be 3.8 ± 0.3 s⁻¹ and 0.9 ± 0.1 s⁻¹, for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface.

The shape of gold nanoparticles has a crucial effect on the catalytic current related to the oxidation of D-(-)-fructose to 5-keto-D-(-)-fructose occurring at the FDH-modified electrode surface. In particular, AuNTrs have a higher effect compared with the spherical one.

     

Protein release from interpenetrating polymer network hydrogels triggered by endogenous biomarkers

A biocompatible drug delivery system with a high-sensitive stimuli-responsive behavior is reported. Calcium alginate hydrogels interpenetrated with polyvinyl alcohol–diboronate polymer network (IPN) effectively respond to the presence of hydrogen peroxide through oxidative degradation of boronate esters. The degradation of the IPN entails the reopening of the original alginate pores, resulting in a 5–9 times increase in release rates of encapsulated proteins with molecular masses ranging from 16.7 to 66 kDa. The release can be triggered by hydrogen peroxide concentrations as low as 50 μM in the bulk solution. Alternatively, hydrogen peroxide can also be generated inside the hydrogels by incorporation of oxidase enzymes in the presence of their substrates, such as lactate, glucose, or hypoxanthine, which can serve as biomarkers of certain physiological disorders.     

A Microelectronic Sensor Device Powered by a Small Implantable Biofuel Cell

Biocatalytic buckypaper electrodes modified with pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase and bilirubin oxidase for glucose oxidation and oxygen reduction, respectively, were prepared for their use in a biofuel cell. A small (millimeter-scale; 2×3×2 mm³) enzyme-based biofuel cell was tested in a model glucose-containing aqueous solution, in human serum, and as an implanted device in a living gray garden slug (Deroceras reticulatum), producing electrical power in the range of 2–10 μW (depending on the glucose source). A microelectronic temperature-sensing device equipped with a rechargeable supercapacitor, internal data memory and wireless data downloading capability was specifically designed for activation by the biofuel cell. The power management circuit in the device allowed the optimized use of the power provided by the biofuel cell dependent on the sensor operation activity. The whole system (power-producing biofuel cell and power-consuming sensor) operated autonomously by extracting electrical energy from the available environmental source, as exemplified by extracting power from the glucose-containing hemolymph (blood substituting biofluid) in the slug to power the complete temperature sensor system and read out data wirelessly. Other sensor systems operating autonomously in remote locations based on the concept illustrated here are envisaged for monitoring different environmental conditions or can be specially designed for homeland security applications, particularly in detecting bioterrorism threats.     

Electrochemical Signal‐triggered Release of Biomolecules Functionalized with His‐tag Units

His‐tagged molecular species, a ferrocene derivative and Protein A, were immobilized on electrode surfaces (Au and graphite) through formation of a chelated complex in the presence of Cu²⁺ cations used as bridging units. The complex was cleaved and the attached molecules were released from the electrode surface by applying reductive potential to the electrodes resulting in Cu²⁺ reduction, thus decomposing the chelate complex. The molecule release process was followed by cyclic voltammetry in case of the ferrocene derivative. His‐tagged Protein A was additionally labeled with a fluorescent tag and its release was followed by fluorescence measurements in the solution and by impedance spectroscopy at the electrode. The studied release of the His‐tagged redox species and biomolecules was considered as a new generic approach to the signal‐controlled molecule release applicable in various biotechnological and biomedical applications.     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

Enzyme based amperometric biosensors

1. Download : Download high-res image (165KB)
2. Download : Download full-size image

     

Boolean Logic Networks Mimicked with Chimeric Enzymes Activated/Inhibited by Several Input Signals

Reactions catalyzed by artificial allosteric enzymes, chimeric proteins with fused biorecognition and catalytic units, were used to mimic multi-input Boolean logic systems. The catalytic parts of the systems were represented by pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). Two biorecognition units, calmodulin or artificial peptide-clamp, were integrated into PQQ-GDH and locked it in the OFF or ON state respectively. The ligand-peptide binding cooperatively with Ca²⁺ cations to a calmodulin bioreceptor resulted in the enzyme activation, while another ligand-peptide bound to a clamp-receptor inhibited the enzyme. The enzyme activation and inhibition originated from peptide-induced allosteric transitions in the receptor units that propagated to the catalytic domain. While most of enzymes used to mimic Boolean logic gates operate with two inputs (substrate and co-substrate), the used chimeric enzymes were controlled by four inputs (glucose – substrate, dichlorophenolindophenol – electron acceptor/co-substrate, Ca²⁺ cations and a peptide – activating/inhibiting signals). The biocatalytic reactions controlled by four input signals were considered as logic networks composed of several concatenated logic gates. The developed approach allows potentially programming complex logic networks operating with various biomolecular inputs representing potential utility for different biomedical applications.     

Implication and Inhibition Boolean Logic Gates Mimicked with Enzyme Reactions

The enzyme system mimicking Implication (IMPLY) and Inhibition (INHIB) Boolean logic gates has been designed. The same enzyme system was used to operate as the IMPLY or INHIB gate simply by reformulating the input signals. The optical analysis of the logic operation confirmed the output generation as expected for the studied logic gates. The conceptual approach to the IMPLY and INHIB logic gates allows their construction with many other enzymes operating in a similar way.     

Biomolecule Release from Alginate Composite Hydrogels Triggered by Logically Processed Signals

Alginate composite hydrogels that exhibit highly sensitive stimuli-responsive behavior were used for signal-stimulated release of pre-loaded insulin. The alginate pores, particularly located at the periphery, were blocked by interpenetration of polyvinyl alcohol (PVA) cross-linked with 1,3-benzenediboronic acid (IPN), thus, significantly reducing uncontrolled leakage of the entrapped biomolecules. The beads were loaded with insulin and various enzymes mimicking different Boolean logic gates (AND, OR, NOR, IMP, INHIB). The enzymes were activated with biologically relevant input signals applied in four logic combinations: 0 , 0 ; 1 , 0 ; 0 , 1 ; 1 , 1 , having the production of H₂O₂ as the result of the biocatalytic reactions. The “successful” combination of the input signals leading to the H₂O₂ production was different for different logic gates, following the corresponding truth tables of the logic gates. When H₂O₂ was produced, boronate ester bonds were oxidized and the IPN was irreversibly degraded, thus re-opening the original pores of the hydrogel. This process allowed release of insulin from the alginate beads. The smart soft material that we have developed tackled well-known limitations of these systems and it may prove valuable in future medical diagnostics or treatments.