Electrochemically‐controlled DNA Release under Physiological Conditions from a Monolayer‐modified Electrode

An indium tin oxide (ITO) electrode prepared on a flexible polymeric support was modified with an amino‐silane and then functionalized with trigonelline and 4‐carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized ammonium group produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pK_a=8.4). The total charge on the monolayer‐modified electrode was positive at the neutral pH and negative at pH>9 (note that 4‐carboxyphenylboronic acid was attached to the electrode surface in excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH). Single‐stranded DNA molecules were loaded on the modified electrode at pH 7.0 due to their electrostatic attraction to the positively charged surface. By applying electrolysis at −1.0 V (vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase in the vicinity of the electrode surface. The process resulted in the transition to the total negative charge due to the negative charges formed on the phenylboronic acid species. This resulted in the electrostatic repulsion and release of the loaded DNA. The developed approach allowed the electrochemically‐triggered DNA release not only in the aqueous solutions, but also in human serum solution, thus giving promise for future biomedical applications.     

Electrochemically Stimulated Insulin Release from a Modified Graphene‐functionalized Carbon Fiber Electrode

A graphene‐functionalized carbon fiber electrode was modified with adsorbed polyethylenimine to introduce amino functionalities and then with trigonelline and 4‐carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized pyridine groups produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pK_a=8.4). The total charge on the monolayer‐modified electrode was positive at the neutral pH and negative at pH > 9. Note that 4‐carboxyphenylboronic acid was attached to the electrode surface in molar excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH. Negatively charged fluorescent dye‐labeled insulin (insulin‐FITC) was loaded on the modified electrode surface at pH 7.0 due to its electrostatic attraction to the positively charged interface. The local pH in close vicinity to the electrode surface was increased to ca. 9–10 due to consumption of H⁺ ions upon electrochemical reduction of oxygen proceeding at the potential of −1.0 V (vs. Ag/AgCl) applied on the modified electrode. The process resulted in recharging of the electrode surface to the negative value due to the formation of the negative charge on the phenylboronic acid groups, thus resulting in the electrostatic repulsion of insulin‐FITC and stimulating its release from the electrode surface. The insulin release was characterized by fluorescence spectroscopy (using the FITC‐labeled insulin), by electrochemical measurements on an iridium oxide, IrO_x, electrode and by mass spectrometry. The graphene‐functionalized carbon fiber electrode demonstrated significant advantages in the signal‐stimulated insulin release comparing with the carbon fiber electrode without the graphene species.     

Direct Probe of Electrochemical Pseudocapacitive pH Jump at a Graphene Electrode**

Molecular-level insight into interfacial water at a buried electrode interface is essential in electrochemistry, but spectroscopic probing of the interface remains challenging. Here, using surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy, we directly access the interfacial water in contact with the graphene electrode supported on calcium fluoride (CaF₂). We find phase transition-like variations of the HD-SFG spectra vs. applied potentials, which arises not from the charging/discharging of graphene but from the charging/discharging of the CaF₂ substrate through the pseudocapacitive process. The potential-dependent spectra are nearly identical to the pH-dependent spectra, evidencing that the pseudocapacitive behavior is associated with a substantial local pH change induced by water dissociation between the CaF₂ and graphene. Our work evidences the local molecular-level effects of pseudocapacitive charging at an electrode/aqueous electrolyte interface.     

DNA Computing Systems Activated by Electrochemically‐triggered DNA Release from a Polymer‐brush‐modified Electrode Array

An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA‐based Identity, AND and XOR logic gates. Single‐stranded DNA molecules were loaded on the mixed poly(N ,N ‐dimethylaminoethyl methacrylate) (PDMAEMA)/poly(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAEMA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at −1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.     

DNA Electrochemical Aptasensor for Detecting Fumonisins B1 Based on Graphene and Thionine Nanocomposite

In this paper, a novel aptasensor was designed by with the dual amplification of Au nanoparticles (AuNPs) and graphene/thionine nanocomposites (GS‐TH) for sensitive determination of fumonisins B₁ (FB₁). AuNPs is modified at the electrode surface to increase the electrical conductivity and fabricate specific recognition interface for FB₁ through the hybridization of capture DNA and its aptamer. Large number of TH molecules were loaded at the surface of graphene sheet to served as electrochemical probe and increase its electrochemical signal due to the excellent conductivity and large surface area of graphene sheet. This type of nanocomposites is then assembled to the single strand section of FB₁ aptamer at electrode surface by π–π stacking interactions between them, leading to an enhanced electrochemical signal. After the specific combination between FB₁ aptamer and its target (FB₁) in solution, GS–TH was released from electrode surface, resulting in a decreased electrochemical signal. The result demonstrated that the decreased currents were proportional to the FB₁ concentration in the range of 1–10⁶ pg/mL with a detection limit of 1 pg/mL. Besides, the developed aptasensor was also applied successfully for the determination of FB₁ in feed samples. The result shows this aptasensor has a higher sensitivity and selectivity.     

Direct Detection of DNA and DNA‐Ligand Interaction by Impedance Spectroscopy

In this work we present an impedimetric detection system for DNA‐ligand interactions. The sensor system consists of thiol‐modified single‐stranded DNA chemisorbed to gold. Impedance measurements in the presence of the redox system ferri‐/ferrocyanide show an increase in charge transfer resistance (R_ct) after hybridisation of a complementary target. Different amounts of capture strands, used for gold electrode modification, result in surface coverages between 3 and 15 pmol/cm² ssDNA. The relative change in R_ct upon hybridisation increases with increasing amount of capture probe on the electrode from 1.5‐ to 4.5‐fold. Impedimetric detection of binding events of a metal‐intercalator ([Ru(phen)₃]²⁺) and a groove binder (spermine) to double‐stranded DNA is demonstrated. Binding of [Ru(phen)₃]²⁺ and spermine exhibits a decrease in charge transfer resistance. Here, the ligand’s interaction leads to electrostatic shielding of the negatively charged DNA backbone. The impedance changes have been evaluated in dependence on the concentration of both DNA binders. Furthermore, the association of a single‐stranded binding protein (SSBP) is found to cause an increase in charge transfer resistance only when incubated with single‐stranded DNA. The specific binding of an anti‐dsDNA antibody to the dsDNA‐modified electrode surface decreases in contrast the interfacial impedance.     

Electrical interfacial layer at TiO2/poly(4-styrene sulfonate) aqueous interface

The interfacial properties of the system titanium(IV) oxide/poly(4-styrenesulfonate) (PSS) over a broad pH region in the presence of different alkali metal chlorides of different concentrations were investigated by means of electrokinetic, adsorption and surface potential measurements. Adsorption and electrokinetic data were obtained with colloid TiO₂ particles, while surface potential data were obtained using a single crystal rutile electrode with the 001 plane exposed to the liquid medium. The electrokinetic and surface potentials of TiO₂ were measured in the absence and presence of PSS. Since the presence of PSS did not significantly affect surface potentials, it was concluded that negative PSS molecules adsorbed at the surface by forming an outer-sphere surface complex rather than inner-sphere complex. The adsorption decreases significantly with pH, while the electrokinetic potential in the presence of PSS is negative in the whole investigated pH region. Amount of adsorbed PSS molecules is limited by the electrostatic repulsion which suppresses further adsorption, i.e. above critical potential of ?50 millivolts. In the acidic region, where the surface is originally positively charged the amount of adsorbed PSS molecules is high since negative PSS molecules should at first compensate original positive charge and in the second step reverse the charge to reach the critical potential. In the basic region the surface charge is already negative so that small amount of adsorbed PSS molecules creates critical potential that prevents further adsorption.     

界面扩张流变法研究C12mimBr对Gemini12-2-12在空气/水界面聚集行为的影响

采用界面扩张流变技术研究了季铵盐偶联表面活性剂C₁₂-(CH₂)₂-C₁₂·2Br (Gemini12-2-12)及其与离子液体表面活性剂溴化1-十二烷基-3-甲基咪唑(C₁₂mimBr)复配体系的动态界面张力、扩张流变性质和界面弛豫过程等, 探讨了C₁₂mimBr 对C₁₂mimBr/Gemini12-2-12 混合体系界面性质的影响及C₁₂mimBr 对Gemini12-2-12界面聚集行为影响的机制. 结果表明, 随着离子液体表面活性剂的不断引入, 体系界面吸附达到平衡所需的时间逐渐缩短, 扩张模量和相角明显降低, 界面吸附膜由粘弹性膜转变为近似纯弹性膜; 同时, 界面及其附近的弛豫过程也发生显著变化, 慢弛豫过程消失, 快弛豫过程占主导地位, 且离子液体浓度越高, 快弛豫的贡献越大. 这些界面性质的变化主要归因于离子液体表面活性剂C₁₂mimBr参与界面形成及两表面活性剂在界面竞争吸附的结果. 少量离子液体表面活性剂C₁₂mimBr 的加入可以填补疏松的Gemini12-2-12 界面上的空位, 形成混合界面吸附膜. 随着C₁₂mimBr 含量的增加, 嵌入界面的C₁₂mimBr 分子数不断增多, 导致界面上相互缠绕的Gemini12-2-12烷基链“解缠”, 在体相和界面分子扩散交换的过程中“解缠”的Gemini12-2-12分子从界面上解吸回到体相, 与此同时, C₁₂mimBr 分子相对较小的空间位阻及较强的疏水作用促使其优先扩散至界面进而取代Gemini12-2-12分子, 最终界面几乎完全被C₁₂mimBr分子所占据.     

Improvement of Selectivity and Stability of Amperometric Detection of Hydrogen Peroxide Using Prussian Blue‐PAMAM Supramolecular Complex Membrane as a Catalytic Layer

A novel hydrogen peroxide (H₂O₂) sensor was fabricated by using a submonolayer of 3‐mercaptopropionic acid (3‐MPA) adsorbed on a polycrystalline gold electrode further reacted with poly(amidoamine) (PAMAM) dendrimer (generation 4.0) to obtain a film on which Prussian Blue (PB) was later coordinated to afford a mixed and stable electrocatalytic layer for H₂O₂ reduction. On the basis of the electrochemical behaviors, atomic force microscopy (AFM) and X‐ray photoelectron spectra (XPS), it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers. It was found that the PB/PAMAM/3‐MPA/Au modified electrode showed an excellent electrocatalytic activity for H₂O₂ reduction. The effects of applied potential and pH of solution upon the response of the modified electrode were investigated for an optimum analytical performance. Even in the presence of dissolved oxygen, the sensor exhibited highly sensitive and rapid response to H₂O₂. The steady‐state cathodic current responses of the modified electrode obtained at ?0.20 V (vs. SCE) in air‐saturated 0.1 mol L^?1 phosphate buffer solution (PBS, pH 6.50) showed a linear relationship to H₂O₂ concentration ranging from 1.2×10^?6 mol L^?1 to 6.5×10^?4 mol L^?1 with a detection limit of 3.1×10^?7 mol L^?1. Performance of the electrode was evaluated with respected to possible interferences such as ascorbic acid and uric acid etc. The selectivity, stability, and reproducibility of the modified electrode were satisfactory.     

Electrochemical Studies of Oxidation of Lomefloxacin and Interaction with Calf Thymus DNA at Nano‐SnO2/DHP Modified Electrode

A nanoparticle thin film modified electrode has been constructed using a glassy carbon electrode (GCE) coated with a nano‐tin oxide/dihexadecylphosphate (nano‐SnO₂/DHP). In pH 6.0 phosphate buffer solutions (PBS), lomefloxacin (LMF) appeared as an anodic peak with peak potential of 1.35 V at nano‐SnO₂/DHP modified electrode. In comparison with a bare GCE or a nano‐SnO₂ modified electrode, the nano‐SnO₂/DHP modified electrode exhibited an enhanced effectiveness for the oxidation of LMF. Cyclic voltammetry (CVs) coupled with fluorescence and UV/vis absorbance spectra techniques were used to study the interaction of LMF with Calf thymus DNA (ctDNA) in phosphate buffer solutions (PBS). The interaction of LMF and ctDNA could result in a considerable decrease in the peak currents and positive shift in the peak potential, as well as changes of fluorescence, UV/vis adsorption spectra and gel electrophoresis. All the acquired data showed that the new adduct between LMF and ctDNA was formed. Electrochemistry coupled with spectroscopy techniques could provide a relatively easy way to obtain useful information about the molecular mechanism of LMF‐ctDNA interactions.     

Adsorption of pyridine on a polycrystalline gold electrode surface studied by infrared reflection absorption spectroscopy

The adsorption behavior of pyridine on a smooth polycrystalline gold electrode surface was investigated over a wide wavenumber region (2000–500 cm⁻¹) by in situ infrared reflection absorption spectroscopy (IRAS). The reversible adsorption/desorption of pyridine was observed upon the change in applied electrode potential, and the adsorption state at positive potentials was found to depend strongly on the kind of halide ion used as a supporting electrolyte. Symmetry analysis of absorption bands observed revealed that pyridine molecules adsorb with the molecular axis (C₂ axis) perpendicular to the electrode surface (vertical configuration) at positive potentials in 0.5 M KF, KCl and KBr solutions. A band due to the out-of-plane bending mode of the adsorbed pyridine molecule was observed at potentials more negative than ca. 0 V for 0.5 M KF solution containing 100 mM pyridine. We concluded that even in the 100 mM pyridine solution, adsorbed pyridine forms a monolayer and that the molecules reorient from a flat (parallel) to the vertical configuration as the potential becomes less negative. No bands due to adsorbed pyridine were detected for 0.5 M KI solution. The amount of adsorbed pyridine was found to depend strongly on the strength of specific adsorption of halide ions.     

William B. Guenther,Chemical Equilibrium. A Practical Introduction for the Physical and Life Sciences,Plenum Press,New York-London (1975), 248 pp., price U.S. $ 23.40

The adsorption and related interfacial behavior of uracil at a mercury electrode/electrolyte solution interface has been studied by differential capacitance and maximum bubble pressure methods in 0.5 M NaF plus 0.01 M Na₂HPO₄ buffer pH 8.0. At concentrations below 24 mM uracil is adsorbed in a flat orientation on the electrode surface and occupies an area of 63 Ų. At higher concentrations and at potentials close to ?0.5 V the adsorbed uracil undergoes a reorientation and adopts a perpendicular stance on the electrode surface where it occupies an area of 39 Ų. In this perpendicular stance uracil undergoes a strong intermolecular stacking interaction with its neighbors similar to that observed between adjacent pyrimidines in nucleic acids.     

Effect of annealing on electrical responses of electrode and surface layer in giant-permittivity CuO ceramic

The effect of heat treatments on the electrical responses of the electrode and surface layer in a giant-permittivity CuO ceramic is investigated. It is found that the giant low-frequency relative permittivity of the CuO ceramic can be tuned by annealing in Ar and O₂—it can be reduced by annealing in Ar, and then it can be enhanced up to the initial value by annealing in O₂. The results indicate to the effect of oxygen vacancy concentration on the giant dielectric properties of the CuO ceramic. Interestingly, three sets of dielectric relaxations are observed in the O₂–annealed sample, which can be assigned as the effects of outmost surface layer, electrode, and grain boundary. Our results reveal that the giant low-frequency dielectric response in the CuO ceramic is associated with both of the interfacial polarization at the sample–electrode interface resulted from a non-Ohmic electrode contact and the outmost surface layer-inner part interface.     

Effects of applied voltage on water at a gold electrode interface from ab initio molecular dynamics

Electrode–water interfaces under voltage bias demonstrate anomalous electrostatic and structural properties that are influential in their catalytic and technological applications. Mean-field and empirical models of the electrical double layer (EDL) that forms in response to an applied potential do not capture the heterogeneity that polarizable, liquid-phase water molecules engender. To illustrate the inhomogeneous nature of the electrochemical interface, Born–Oppenheimer ab initio molecular dynamics calculations of electrified Au(111) slabs interfaced with liquid water were performed using a combined explicit–implicit solvent approach. The excess charges localized on the model electrode were held constant and the electrode potentials were computed at frequent simulation times. The electrode potential in each trajectory fluctuated with changes in the atomic structure, and the trajectory-averaged potentials converged and yielded a physically reasonable differential capacitance for the system. The effects of the average applied voltages, both positive and negative, on the structural, hydrogen bonding, dynamical, and vibrational properties of water were characterized and compared to literature where applicable. Controlled-potential simulations of the interfacial solvent dynamics provide a framework for further investigation of more complex or reactive species in the EDL and broadly for understanding electrochemical interfaces in situ.

Ab initio molecular dynamics of an aqueous electrode interface reveal the electrostatic, structural, and dynamic effects of quantifiable voltage biases on water.     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.     

Electrochemical behaviors of nicotine and its interaction with DNA

The studies of the interaction between nicotine and DNA on the solid electrode were proposed for the first time. The electrochemical behaviors of nicotine and its interaction with DNA were explored by differential pulse voltammetry (DPV) at the DNA modified glassy carbon electrode (DNA/GCE). In 0.05 M Na₂C₂O₄ (pH 4.24), nicotine at DNA/GCE showed an irreversible reductive behavior in the range of ?1.6 to ?1.1 V. The presence of DNA led to the decrease in the peak current of nicotine and the negative shift in the potential, indicating that nicotine could interact with DNA by electrostatic mode. The binding ratio between nicotine and DNA was calculated to be 2:1 and the binding constant was 8.31(±0.36) × 10². The interaction between nicotine and DNA could be further verified by UV–vis spectroscopy.     

RHEOLOGICAL PROPERTIES AND APPLICATIONS OF MESQUITE TREE (PROSOPIS JULIFLORA) GUM. 3. THE INFLUENCE OF MESQUITE GUM OH THE INTERFACIAL TENSION BETWEEN OIL AND WATER

The influence of mesquite gum on the interfacial tension between liquid paraffin and distilled water has been studied as a function of gum concentration, pH, and added NaCl or CaCl₂. The time dependence of the reduction in interfacial tension was influenced by all three variables. Diffusion to the oil-water interface was the dominant factor in the initial decrease of interfacial tension when low mesquite gum concentrations were used. Reconformation of molecules adsorbed at the oil-water interface controlled the reduction in interfacial tension at longer times when using more concentrated gum solutions.     

Thermodynamic consideration on the interface formation of water and ethylene glycol isobutyl ether mixture

The interfacial tension of the binary two-phase mixture of water and ethylene glycol isobutyl ether (EIB) was measured as a function of temperature in the vicinity of the lower critical solution temperatureT _c under atmospheric pressure. The interfacial tension decreased with decreasing temperature and approached zero atT _c . The thermodynamic quantities of interface formation were evaluated by applying equations developed previously to the interfacial tension vs temperature curves. The results were compared with those of the water and diethylene glycol diethyl ether system examined previously, and the effect of the molecular structure of the ether molecule on its interfacial behavior was discussed. It was suggested that the hydration of the ethylene oxide groups of ether molecules was an important factor in the interface formation as well as in the mixing of component molecules of the systems investigated here.     

An electrochemical biosensor for direct detection of DNA using polystyrene-g-soya oil-g-imidazole graft copolymer

A label-free electrochemical DNA biosensor was developed through the attachment of polystyrene-g-soya oil-g-imidazole graft copolymer (PS-PSyIm) onto modified graphene oxide (GO) electrodeposited on glassy carbon electrode (GC). GC/GO electrode was initially functionalised via electrochemical reduction of 4-nitrobenzene diazonium salt, followed by the electrochemical reduction of NO₂ to NH₂. Subsequent to the electrochemical deposition of gold nanoparticles on modified surface, the attachment of the PS-PSyIm graft copolymer on the resulting electrode was achieved. The interaction of PS-PSyIm with DNA at the bare glassy carbon electrode was studied by cyclic voltammetry technique, and it was found that interaction predominantly takes place through intercalation mode. The selectivity of developed DNA biosensor was also explored by DPV on the basis of considering hybridisation event with non-complementary, one-base mismatched DNA and complementary target DNA sequence. Large decrease in the peak current was found upon the addition of complementary target DNA. The sensitivity of the developed DNA biosensor was also investigated, and detection limit was found to be 1.20 nmol L^?1.     

Lithium Storage in Heat‐Treated SnF2/Polyacrylonitrile Anode

Tin(II) fluoride (SnF₂) has a high Li‐storage capacity because it stores lithium first by a conversion reaction and then by a Li/Sn alloying/dealloying reaction. A polyacrylonitrile (PAN)‐bound SnF₂ electrode was heat‐treated to enhance the integral electrical contact and the mechanical strength through its cross‐linked framework. The heat‐treated SnF₂ electrode showed reversible capacities of 1047 mAh g^?1 in the first cycle and 902 mAh g^?1 after 100 cycles. Part of the excess capacity is due to lithium storage at the Sn/LiF interface, and the other part is assumed to correspond to the presence of reduced SnF₂ with protons released during the thermal cross‐linking of PAN.