On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

Retroracemization using new forms of Belokon's original ligand: ­intermediate NiII complexes of N‐({2‐[N‐(S)‐alkylprolylamino]phenyl}phenylmethylene)‐(S)‐phenylalanine (alkyl is 2‐picolyl, 3‐picolyl or ethyl)

In the title compounds, [N‐(phenyl{2‐[N‐(S)‐(2‐picolyl)­prolyl­amino]­phenyl}methyl­ene)‐(S)‐phenyl­alaninato]­nickel(II), [Ni(C₃₃H₃₀N₄O₃)], (I), [N‐(phenyl{2‐[N‐(S)‐(3‐picolyl)­prolyl­amino]­phenyl}methyl­ene)‐(S)‐phenyl­alaninato]­nickel(II) hemihydrate, [Ni(C₃₃H₃₀N₄O₃)]·0.5H₂O, (II), and [N‐({2‐[N‐(S)‐ethyl­prolyl­amino]­phenyl}phenyl­methyl­ene)‐(S)‐phenyl­ala­nin­ato]­nickel(II), [Ni(C₂₉H₂₉N₃O₃)], (III), the Ni^II centres have approximate square‐planar coordination geometries from N₃O donor sets. The picolyl N atoms in (I) and (II) are too remote from the metal centres to interact significantly, but the metal coordination geometries experience tetrahedral distortion and/or displacement of the metal centre from the N₃O plane. These are linked to conformational differences between the ligands of the symmetry‐independent complexes (Z′ = 2), which in turn are related to molecular packing. In (III), where a less sterically demanding ethyl group replaces the picolyl substituents, there are none of the distortions or displacements seen in (I) and (II).     

Viscosity-Temperature Behavior of Hydroxypropyl Cellulose Solution in Presence of an Electrolyte or a Surfactant: A Convenient Method to Determine the Cloud Point of Polymer Solutions

The viscosity of hydroxypropyl cellulose (HPC) solution with or without an additive has been measured continuously as a function of temperature with the help of a vibro-viscometer. The viscosity of the polymer solution showed a gradual decrease initially with increase in temperature until a particular point beyond which there was a sharp decrease in the viscosity, which coincided with the clouding of the solution. The cloud point temperature (CP) of the polymer solution was determined from the first derivative plot of viscosity vs. temperature. Effect of addition of an electrolyte or a surfactant on the CP of HPC solution has also been studied. While a decrease in CP of HPC solution in presence of fluoride, chloride, or bromide ions was observed, presence of iodide or thiocyanide ions led to an increase in the CP. However, presence of an ionic surfactant initially lowered the CP but beyond a particular surfactant concentration a sharp increase in cloud point was observed due to interaction of the surfactant with the polymer. The results suggest that surfactants with longer hydrophobic tail or more hydrophobic groups have more affinity for HPC.     

A characterization of finite symplectic polar spaces of odd prime order

A sufficient condition for the representation group for a nonabelian representation (Definition 1.1) of a finite partial linear space to be a finite p-group is given (Theorem 2.9). We characterize finite symplectic polar spaces of rank r at least two and of odd prime order p as the only finite polar spaces of rank at least two and of prime order admitting nonabelian representations. The representation group of such a polar space is an extraspecial p-group of order p1+2r and of exponent p (Theorems 1.5 and 1.6).     

On a class of difference sequences related to the ℓ<Superscript>p</Superscript> space defined by Orlicz functions

In this article we introduce the difference sequence space m(M, Δ, φ) using the Orlicz function. We study its different properties like solidity, completeness etc. Also we obtain some inclusion relations involving the space m(M, Δ, φ).      

Lysozyme coated DNA and DNA/SWNT fibers by solution spinning

DNA fibers were prepared by solution spinning of DNA in a lysozyme (LSZ) coagulation/gelation bath. Strong positive charges carried by LSZ protein condensed the DNA (strong negative charged) molecules resulting in self‐assembly and the formation of fibrillar structures in a gel‐like network. DNA/LSZ fibril formation was found to be dependent on the ratio of DNA to LSZ. A minimum 0.1 wt.‐% of LSZ was necessary to condense 0.1 wt.‐% of DNA into micro‐fibrils. Macroscopic fiber spinning was possible by introducing a 0.1 wt.‐% DNA aqueous solution into a 0.2 wt.‐% LSZ coagulation bath which resulted in fibers with ≈20 µm diameter. Single‐walled carbon nanotubes (SWNT) were also incorporated into these fibers to explore the possibility for creating hybrid materials. All DNA‐based fibers exhibit strong birefringence confirming molecular orientation along the fiber axis. Due to the presence of LSZ, the fibers exhibit antimicrobial activity against bacteria like Micrococcus lysodeikticus.

     

Some <Emphasis Type="Italic">I</Emphasis>-convergent sequence spaces defined by Orlicz functions

In this article we introduce the sequence spaces cI(M),c0I(M),mI(M) and m0I(M) using the Orlicz function M.We study some of the properties like solid,symmetric,sequence algebra,etc and prove some inclusion relations.