Ab initio and variational transition state approach to beta-C3N4 formation: kinetics for the reaction of CH3NH2 with H

The CH3NH2 molecule has been considered as either an important intermediate in methane and ammonia mixtures or a precursor in methylamine and hydrogen mixtures in the synthesis of carbon nitride thin films. The fast Hydrogen (H) abstraction from CH3NH2 is an important process involved in the formation of HCN or CNH in the chemical vapor deposition (CVD) of carbon nitride thin films. The energetic and kinetic characteristics of the H abstraction reaction from CH3NH2 by atomic H used in CVD of beta-C3N4 were studied using ab initio direct dynamics methods for the first time. Two primary processes were identified for this reaction: H abstraction from the CH3 group and H abstraction from the NH2 group. On the basis of ab initio data, the rate constants of each channel have been deduced by canonical variational transition state theory with small-curvature tunneling correction over a wide temperature range of 200 to approximately 3000 K. The theoretical results were compared with available experimental data.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

Cohesive energy densities of polyethers: Poly(hexamethylene oxide)

The solubility parameter of poly(hexamethylene oxide) has been estimated by measuring solution viscosities and by turbidimetric titrations in a series of solvents. From both experimental methods, a value of $\text{δ}{}_{\mathrm{<mtext>p</mtext>}}\text{= 33.9}\text{J}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{cm}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}$ ($\text{8.1}\text{cal}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{cm}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}$) was obtained, whence the cohesive energy density is 274.5 J cm^?3 (65.6 cal cm^?3). These experimental values are compared with those calculated by empirical methods.     

Crystallization kinetics of the monoclinic modification of poly(3,3-dimethyl oxetane)

Poly(3,3-dimethyl oxetane) fractions ranging in number average molecular weights from 18500 to 130000 have been isothermally crystallized from the relaxed melt state in the temperature range from 12 to 44 °C, where only the monoclinic modification is formed. The influence of molecular weight and undercooling in crystallization kinetics has been analyzed. The level of crystallinity is very slightly dependent on molecular weight but the influence of this parameter on the time scale of the crystallization is relatively pronounced. The crystallization temperature coefficient was determined and it was found a constant value of the product of the interfacial energies in the range of molecular weights which has been analyzed. Growth rate measurements were carried out for fraction ¯M _n=130000 and it was found that the temperature coefficients for overall and growth rates are equal. Finally, the comparison of the experimental results for this polymer with those reported for poly(oxetane) shows two main differences: first, the crystallization rate is slower for poly(3,3-dimethyl oxetane) and second, the temperature coefficient is smaller for this polymer.     

Steady-state heat transfer and thermal zone spreading in gel isoelectric focusing.

The zone spreading caused by a transverse pH profile due to a temperature gradient through the thickness of a gel slab is estimated. The temperature difference (delta T) between the upper and lower gel surfaces can be calculated as a function of the electric power dissipated in the gel and the gel dimensions. It is found that when delta T is only 1 degree C the zone spreading due to this thermal excursion is as high as 0.5 mm. Thus, an admissible delta T is found to be equal to 0.2 degrees C, since this corresponds to a thermal zone spreading of only 0.1 mm, i.e. the same order of magnitude as the spatial resolution of a laser scanner. A thermal zone spreading of 0.1 mm is compatible with a resolving power of 0.01 pH unit, the current limit of conventional isoelectric focusing in amphoteric buffers. A requirement for the thickness of a gel slab is formulated: e.g., at 40 W applied power (over a gel surface area of 25 x 11 cm), a thermal zone spreading limited to 0.1 mm can only be obtained with a gel thickness of approximately 170 microns.     

Spectrofluorimetric determination of cisatracurium and mivacurium in spiked human serum and pharmaceuticals

Spectrofluorimetric methods to determine cisatracurium and mivacurium are proposed and applied to the determination of both substances in human serum and to the determination of mivacurium in pharmaceuticals. The fluorimetric methods allow the determination of 5-500 ng ml(-1) of mivacurium in aqueous solutions and 5-500 ng ml(-1) of cisatracurium in water-acetonitrile solutions, both containing acetic acid-sodium acetate buffer (pH 5.5) with lambda(exc)=230 nm and lambda(em)=324 nm.     

Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

Observation of defect clustering in Gd-doped calcium fluoride

Abstract

Solid solutions Ca_1-xGd_xF_2+x for 3 × 10^?7≤ x ≤10^?1 have been studied by electron paramagnetic resonance (EPR) and ionic thermal currents (ITC). The EPR experiments show the presence of two single-ion sites a cubic and a tetragonal Gd³⁺ center which co-exist with comparable abundances for intermediate impurity concentrations. The cubic center predominates at very low and high concentrations. Seven different relaxation processes have been identified from the ITC spectra and the variation of their intensity vs. x was measured. The absolute concentrations of the cubic and nn Gd³⁺ dipoles were calculated. The scavenging of interstitial fluorines by the neutral clusters explains both the abundance of cubic sites at high concentration and the variety of orientable clusters detected by ITC.     

Activated carbon derived from tree bark biomass with promising material properties for supercapacitors

Journal of Solid State Electrochemistry - Activated carbon from tree bark (ACB) has been synthesized by a facile and environmentally friendly activation and carbonization process at different...