Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

Improved Synthesis,Structure, and Solution Characterization of the Cyclic 48-Tungsto-8-Arsenate(V), [H4As8W48O184]36−

We report on an improved synthesis and structural characterization of the cyclic 48-tungsto–8-arsenate(V) [H₄As₈W₄₈O₁₈₄]^36? (1). The mixed lithium–potassium salt of this polyanion, K_26.5Li_9.5[H₄As₈W₄₈O₁₈₄]·90H₂O (KLi-1), has been studied in the solid state by IR, single-crystal X-ray diffraction, and elemental analysis, and in solution by ¹⁸³W NMR spectroscopy.     

Facile preparation of 3-substituted 2-quinazolinones via electrogenerated base

A new series of 3,4-disubstituted quinazolin-2-ones, with potential T-type calcium channel antagonist activity, and new 4-methylene-quinazolin-2-ones, promising catalysts as N-heterocyclic olefins, have been prepared in good yield by a simple reaction between 2-aminobenzophenone, or 2-aminoacetophenone, and cyanomethyl anion electrogenerated by acetonitrile reduction at a graphite electrode, followed by the addition of different organic isocyanates and subsequent heterocyclization.     

Investigation of the Mechanism of Colloidal Silicalite‐1 Crystallization by Using DLS,SAXS, and 29Si NMR Spectroscopy

Colloidal silicalite‐1 zeolite was crystallized from a concentrated clear sol prepared from tetraethylorthosilicate (TEOS) and aqueous tetrapropylammonium hydroxide (TPAOH) solution at 95 °C. The silicate speciation was monitored by using dynamic light scattering (DLS), synchrotron small‐angle X‐ray scattering (SAXS), and quantitative liquid‐state ²⁹Si NMR spectroscopy. The silicon atoms were present in dissolved oligomers, two discrete nanoparticle populations approximately 2 and 6 nm in size, and crystals. On the basis of new insight into the evolution of the different nanoparticle populations and of the silicate connectivity in the nanoparticles, a refined crystallization mechanism was derived. Upon combining the reagents, different types of nanoparticles (ca. 2 nm) are formed. A fraction of these nanoparticles with the least condensed silicate structure does not participate in the crystallization process. After completion of the crystallization, they represent the residual silicon atoms. Nanoparticles with a more condensed silicate network grow until approximately 6 nm and evolve into building blocks for nucleation and growth of the silicalite‐1 crystals. The silicate network connectivity of nanoparticles suitable for nucleation and growth increasingly resembles that of the final zeolite. This new insight into the two classes of nanoparticles will be useful to tune the syntheses of silicalite‐1 for maximum yield.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

Selective conversion of {Mo132} Keplerate ion into 4-electron reduced crown-capped Keggin derivative [Te5Mo15O57](8-). A key intermediate to single-phase M1 multielement MoVTeO light-alkanes oxidation catalyst

{Mo(132)} Keplerate anion reacts with tellurites to give a soluble precursor to produce in hydrothermal conditions single-phase M1 MoVTeO light-alkanes oxidation catalyst. Characterization of this Te-containing intermediate by single-crystal X-ray diffraction, (125)Te NMR, UV-visible and redox titration reveals a molybdotellurite anion as a crown-capped Keggin derivative.     

A microwave-assisted and heteropolyacids-catalysed cyclocondensation reaction for the synthesis of 4(3H)-quinazolinones

We have investigated a microwave-assisted synthesis of 4(3H)-quinazolinones by condensation of anthranilic acid, orthoesters (or formic acid) and substituted anilines,using Keggin-type heteropolyacids (H(3)PW(12)O(40).13H(2)O, H(4)SiW(12)O(40).13H(2)O,H(4)SiMo(12)O(40).13H(2)O or H(3)PMo(12)O(40).13H(2)O) as catalysts. We found that the the use of H(3)PW(12)O(40).13H(2)O acid coupled to microwave irradiation allows a solvent-free, rapid (approximately 13min) and high-yielding reaction.     

Clustering Six Electrons within “Dawson-Like” Polyoxometalate: An Open Route toward Its Post-functionalization

Super-reduction of polyoxometalates (POMs) in solution is of fundamental interest for designing innovative energy storage systems. In this article, we show that the “Dawson-like” POM can undergo a disproportionation process during its massive electron uptake, leading to species containing three metal-metal bonds as evidenced by X-ray diffraction, multi-nuclear magnetic resonance spectroscopy (¹H and ¹⁸³W NMR), extended X-ray absorption fine structure (EXAFS), UV/Vis, and voltammetry techniques. This result indicates that electron storing within metal-metal bonds is not a unique property of Keggin-type POM as postulated since the 70s. Besides, we demonstrate that the presence of an electron-rich triad in the “Dawson-like” POM allows its post-functionalization with additional tungstate ions, generating a chiral molecule that is also the largest W^IV-containing POMs known to date.