Synthesis,X‐ray powder structure analysis and biological properties of a mononuclear Cu(II) complex of N‐2‐hydroxyhippuric acid

A mononuclear copper (II) complex of N‐2‐hydroxyhippuric acid (2HHA), [Cu(HA)(H₂O)₂], has been synthesized and characterized by spectroscopic and X‐ray powder diffraction studies. Crystal structure of [Cu(HA)(H₂O)₂] reveals a distorted square‐pyramidal geometry around the metal center. The crystal packing in the complex exhibits a three‐dimensional framework formed by intermolecular O? ; H···O and C? H···O hydrogen bonds. Toxicity and antitumor properties of the complex have been studied in vivo. The complex, capable of depleting glutathione (GSH) at nontoxic doses, may be utilized to sensitize drug‐resistant cells where resistance is due to an elevated level of GSH. Copyright © 2009 John Wiley & Sons, Ltd.     

One pot glucose detection by [Fe(III)(biuret-amide)] immobilized on mesoporous silica nanoparticles: an efficient HRP mimic

An [Fe(III)(biuret-amide)] complex has been immobilized onto mesoporous silica nanoparticles via Cu(I) catalyzed azide-alkyne click chemistry. This hybrid material functions as an efficient peroxidase mimic and was successfully used for the quantitative determination of hydrogen peroxide and glucose via a one-pot colorimetric assay.     

Synthesis of selenoxo peptides and oligoselenoxo peptides employing LiAlHSeH

Synthesis of selenoxo peptides by the treatment of N(α)-protected peptide esters with a combination of PCl(5) and LiAlHSeH is delineated. The method is simple, high-yielding, and free from racemization. Thus obtained selenoxo peptides are used as units for N-terminal chain extension through N(α)-deprotection/coupling to yield peptide-selenoxo peptide hybrids. Multiple selenation is demonstrated by conversion of two peptide bonds of tripeptides into selenoxo peptide bonds. Amino acid derived arylamides are also converted into aryl selenoamides. C(6)H(5)-CSeNH-Val-OMe 8f is obtained as single crystal, and its structure was determined through X-ray diffraction study.     

A structural remedy toward bright dipolar fluorophores in aqueous media

The donor–acceptor (D–A) type dipolar fluorophores, an important class of luminescent dyes with two-photon absorption behaviour, generally emit strongly in organic solvents but poorly in aqueous media. To understand and enhance the poor emission behaviour of dipolar dyes in aqueous media, we undertake a rational approach that includes a systematic structure variation of the donor, amino substituent of acedan, an important two-photon dye. We identify several factors that influence the emission behaviour of the dipolar dyes in aqueous media through computational and photophysical studies on new acedan derivatives. As a result, we can make acedan dyes emit bright fluorescence under one- and two-photon excitation in aqueous media by suppressing the liable factors for poor emission: 1,3-allylic strain, rotational freedom, and hydrogen bonding with water. We also validate that these findings can be generally extended to other dipolar fluorophores, as demonstrated for naphthalimide, coumarin and (4-nitro-2,1,3-benzoxadiazol-7-yl)amine (NBD) dyes. The new acedan and naphthalimide dyes thus allow us to obtain much brighter two-photon fluorescent images in cells and tissues than in their conventional forms. As an application of these findings, a thiol probe is synthesized based on a new naphthalimide dye, which shows greatly enhanced fluorescence from the widely used N,N-dimethyl analogue. The results disclosed here provide essential guidelines for the development of efficient dipolar dyes and fluorescence probes for studying biological systems, particularly by two-photon microscopy.     

Hydrodynamic theory of plasma oscillations in quasi-two-dimensional systems

We show that a hydrodynamic theory can be applied to calculate the dispersion relation of plasma oscillations in a quasi-two-dimensional system. It also leads to the conclusion that additional “multipole” modes may exist in the system.     

A study of the kinetics of La3+-promoted methanolysis of S-aryl methylphosphonothioates: possible methodology for decontamination of EA 2192, the toxic byproduct of VX hydrolysis

The kinetics of the La3+-catalyzed methanolysis of a series of S-aryl methylphosphonothioates (4a-e, phenyl substituents = 3,5-dichloro, 4-chloro, 4-fluoro, 4-H, 4-methoxy) were studied at 25 °C with s(s)pH control. The reaction involves saturation binding of the anionic substrates to dimeric La3+/methoxide catalysts formulated as La2(3+)(-OCH3)x, where x = 2-5 depending on the solution s(s)pH. Cleavage of the La3+-bound methylphosphonothioates is fast, ranging from 5 × 10(-3) s(-1) to 5.5 × 10-(5) s(-1) for substrates 4a-e at a s(s)pH of 8.4 and 1.6 × 10(-1) s(-1) to 4 × 10(-3) s(-1) at a s(s)pH of 11.7. The rate accelerations for the methanolysis of substrates 4a-e, relative to their background methoxide-promoted reactions, average 7 × 10(10) and 1.5 × 10(9), respectively, at s(s)pH's of 8.4 and 11.7. The catalytic system is predicted to cleave EA 2192 (S-2(N,N-di-iso-propylaminoethyl)methylphosphonothioate), a toxic byproduct of the hydrolysis of VX, with a t1/2 between 4 and 8 min at a s(s)pH of 8.4, and 27 min at a s(s)pH of 11.7.     

A ratiometric fluorescent chemosensor for iron: discrimination of Fe2+ and Fe3+ and living cell application

A newly designed probe, 6-thiophen-2-yl-5,6-dihydrobenzo[4,5]imidazo-[1,2-c] quinazoline (HL(1)) behaves as a highly selective ratiometric fluorescent sensor for Fe(2+) at pH 4.0-5.0 and Fe(3+) at pH 6.5-8.0 in acetonitrile-HEPES buffer (1/4) (v/v) medium. A decrease in fluorescence at 412 nm and increase in fluorescence at 472 nm with an isoemissive point at 436 nm with the addition of Fe(2+) salt solution is due to the formation of mononuclear Fe(2+) complex [Fe(II)(HL)(ClO(4))(2)(CH(3)CN)(2)] (1) in acetonitrile-HEPES buffer (100 mM, 1/4, v/v) at pH 4.5 and a decrease in fluorescence at 412 nm and increase in fluorescence at 482 nm with an isoemissive point at 445 nm during titration by Fe(3+) salt due to the formation of binary Fe(3+) complex, [Fe(III)(L)(2)(ClO(4))(H(2)O)] (2) with co-solvent at biological pH 7.4 have been established. Binding constants (K(a)) in the solution state were calculated to be 3.88 × 10(5) M(-1) for Fe(2+) and 0.21 × 10(3) M(-1/2) for Fe(3+) and ratiometric detection limits for Fe(2+) and Fe(3+) were found to be 2.0 μM and 3.5 μM, respectively. The probe is a "naked eye" chemosensor for two states of iron. Theoretical calculations were studied to establish the configurations of probe-iron complexes. The sensor is efficient for detecting Fe(3+)in vitro by developing a good image of the biological organelles.     

Concomitant polymorphism of an antiferromagnetically coupled dicopper(II,II) complex with single strand helical assembly: Synthesis,structure, DSC,magnetic and heterogeneous catalytic studies

Two concomitant polymorphic coordination complexes (dark blue – I and black – II) with the formula (Cu₂C₄₄H₆₀N₄O₄) have been synthesized and characterized crystallographically. Magnetic measurements show the presence of a strong antiferromagnetic interaction and the 2J value corresponds extremely well to the theoretically calculated one, indicating the fact that it follows nicely the magneto-structural relationship. Immobilization of the copper(II) complex 1 on a 2D-hexagonal mesoporous silica showed good catalytic efficiency in the liquid phase partial oxidation of olefins in the presence of TBHP as an oxidant.     

Kinetics and mechanism of oxidation of iodide with a (μ‐oxo)diiron(III,III) complex in weakly acidic media

The complex ion [Fe^III₂(μ‐O)(phen)₄(H₂O)₂]⁴⁺ ( 1 ) (phen = 1,10‐phenanthroline) and its hydrolytic derivatives [Fe^III₂(μ‐O)(phen)₄(H₂O)(OH)]³⁺ ( 1a ) and [Fe^III₂(μ‐O)(phen)₄‐ (OH)₂]²⁺ ( 2a ) coexist in rapid equilibria in the range pH 4.23–5.35 in the presence of excess phenanthroline (pK_a1 = 3.71±0.03, pK_a2 = 5.28± 0.07). The solution reacts quantitatively with I⁻ to produce [Fe(phen)₃]²⁺ and I₂. Only 1 but none of its hydrolytic derivatives is kinetically active. Both inner and outer sphere pathways operate. The observed rate constants show second‐order dependence on the concentration of iodide, while the dependence on [H⁺] is complex in nature. Added Cl⁻ inhibits the formation of adduct with I⁻ and thus retards the rate of inner sphere path, leading to a rate saturation at high [Cl⁻], where only the outer sphere mechanism is active. Kinetic data indicate that simultaneous presence of two I⁻ in the vicinity of diiron core is necessary for the reduction of 1 . © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 737–743, 2005     

"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.