Organic Superbases in Recent Synthetic Methodology Research

Organic superbases are a distinct and increasingly utilized class of Brønsted base that possess properties complementary to common inorganic bases. This Concept article discusses recent applications of commercial organic superbases in modern synthetic methodologies. Examples of the advantages of organic superbases in three areas are highlighted, including the discovery of new base-catalyzed reactions, the optimization of reactions that require stoichiometric Brønsted base, and in high-throughput experimentation technology.     

New nanocomposites containing metal nanoparticles, carbon nanotube and polymer

Metal-carbon nanotube-graft-polymer (MCNT-g-P) nanocomposites were synthesized and characterized successfully. In this work, multiwall carbon nanotubes (MWCNT) were opened using HNO₃/H₂SO₄ mixture and filled by metal nanoparticles such as silver nanoparticles through wet chemistry method. Then MWCNT containing metal nanoparticles were used as macroinitiator for ring opening polymerization of ε-caprolactone and MCNT-g-P nanocomposites were obtained. Length of grafted polymer arms onto the MWCNT was controlled using MWCNT/ε-caprolactone ratio. Structure and properties of nanocomposites were evaluated by TEM, DSC, TGA, and spectroscopy methods.     

Adsorption of CO2 on mesocellular siliceous foam iteratively functionalized with dendrimers

Melamine-type dendrimers are grafted to mesocellular siliceous foam (MCF) with ultralarge mesopores by stepwise alternating treatments of the substrate with 2,4,6-trichlorotriazine and ethylenediamine. MCF grafted dendrimers up to 4th generation are prepared and characterized. Very high organic loadings (55 wt% at the 4th generation) are achieved, with half of the initial substrate mesopores volume remaining unoccupied—leaving room for the rapid ingress and egress of small gas molecules. The product materials possess relatively high thermal stability—their decomposition starts at around 300 °C. Adsorption measurements suggest that only the primary amine groups of these melamine type structures are active for CO₂ chemisorption. The CO₂ adsorption capacities of these adsorbents are improved relative to the unfunctionalized MCF, especially when considered on a wt% substrate basis.     

Synthetic Advantages of Defluorinative C−F Bond Functionalization

Much progress has been made in the development of methods to both create compounds that contain C−F bonds and to functionalize C−F bonds. As such, C−F bonds are becoming common and versatile synthetic functional handles. This review summarizes the advantages of defluorinative functionalization reactions for small molecule synthesis. The coverage is organized by the type of carbon framework the fluorine is attached to for mono- and polyfluorinated motifs. The main challenges, opportunities and advances of defluorinative functionalization are discussed for each class of organofluorine. Most of the text focuses on case studies that illustrate how defluorofunctionalization can improve routes to synthetic targets or how the properties of C−F bonds enable unique mechanisms and reactions. The broader goal is to showcase the opportunities for incorporating and exploiting C−F bonds in the design of synthetic routes, improvement of specific reactions and advent of new methods.     

A Monolithically Integrated Gallium Nitride Nanowire/Silicon Solar Cell Photocathode for Selective Carbon Dioxide Reduction to Methane

A gallium nitride nanowire/silicon solar cell photocathode for the photoreduction of carbon dioxide (CO₂) is demonstrated. Such a monolithically integrated nanowire/solar cell photocathode offers several unique advantages, including the absorption of a large part of the solar spectrum and highly efficient carrier extraction. With the incorporation of copper as the co‐catalyst, the devices exhibit a Faradaic efficiency of about 19 % for the 8e^? photoreduction to CH₄ at ?1.4 V vs Ag/AgCl, a value that is more than thirty times higher than that for the 2e^? reduced CO (ca. 0.6 %).     

When size matters: exploring the potential of aminocyclopropenium cations as head groups in triphenylene-derived ionic liquid crystals in comparison with guanidinium and ammonium units

The influence of the size of a single ionic head group on the mesomorphic properties of hexaalkoxytriphenylenes was investigated by synthesising three derivatives with increasing head group diameter. The derivatives were investigated with optical polarising microscopy (POM), differential scanning calorimetry (DSC) and X-ray scattering (WAXS, SAXS). For the derivative with the small trimethylammonium head group, an enantiotropic mesophase was found. The derivative with the bigger tetramethylguanidine head group only showed a monotropic phase and the derivative with the largest bisdiisopropylaminocyclopropenium head group displayed no liquid crystaline properties at all.     

Cobalt oxide nanoparticles as a novel high-efficiency fiber coating for solid phase microextraction of benzene,toluene, ethylbenzene and xylene from aqueous solutions

In this work cobalt oxide nanoparticles were introduced for preparation of a novel solid phase microextraction (SPME) fiber coating. Chemical bath deposition (CBD) technique was used in order for synthesis and immobilization of the Co₃O₄ nanomaterials on a Pt wire for fabrication of SPME fiber. The prepared cobalt oxide coating was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The fiber was evaluated for the extraction of benzene, toluene, ethylbenzene and xylene (BTEX) in combination with GC–MS. A simplex optimization method was used to optimize the factors affecting the extraction efficiency. Under optimized conditions, the proposed fiber showed extraction efficiencies comparable to those of a commercial polydimethylsiloxane (PDMS) fiber toward the BTEX compounds. The repeatability of the fiber and its reproducibility, expressed as relative standard deviation (RSD), were lower than about 11%. No significant change was observed in the extraction efficiency of the new SPME fiber after over 50 extractions. The fiber was successfully applied to the determination of BTEX compounds in real samples. The proposed nanostructure cobalt oxide fiber is a promising alternative to the commercial fibers as it is robust, inexpensive and easily prepared.     

基于纳米结构的电化学传感器用于伏安法测定苄丝肼、尿酸和叶酸(英文)

A carbon paste electrode modified with carbon nanotubes and ferrocene was fabricated.An electrochemical study of the modified electrode and an investigation into its efficiency for the electrocatalytic oxidation of benserazide,uric acid and folic acid were undertaken.The electrode was also used to study the electrocatalytic oxidation of benserazide using cyclic voltammetry,chronoamperometry,and square wave voltammetry(SWV).We found that the oxidation of benserazide at the surface of the modified electrode occurs at a potential about 285 mV lower than that of unmodified carbon paste electrode.SWV gave a linear dynamic range from 8.0×10-7 to 7.0×10 4 mol/L.The detection limit was 1.0×10-7 mol/L for benserazide.This modified electrode was used for the determination of benserazide,uric acid,and folic acid in an urine sample.     

Paclitaxel loaded poly (DL lactic acid co castor oil) 60:40 with poloxamer‐F68 rod shape cylindrical nanoparticle preparation and in vitro cytotoxicity studies

This research presents a thin‐film hydration‐solvent evaporation method to formulate the paclitaxel loaded poly (DL lactic acid co castor oil) 4:6 with poloxamer‐F68 cylindrical shape nanoparticles. The particles were less than 250 nanometers (nm) in size, with an average width of 60 nm and an average length of 100 nm. The percent yield, encapsulation efficiency (EE), and percent drug loading (DL) were detected. This approach produces drug loading values between 5% and 20% w/w. X‐ray powder diffraction (XRD) identified the physicochemical properties of nanoparticles differential scanning calorimetry (DSC) and Fourier‐transform infrared spectroscopy (FTIR). The investigation shows that the drug is molecularly dispersed in polymers or given in an amorphous or semicrystalline state. Horizontal water bath shaker technology considered the in vitro release of PTX loaded nanoparticles under sink conditions. Poly (DL lactic acid co castor oil) 4:6 nanoparticles exhibited a sustained release analysis. At the end of 30 hours, the percent cumulative drug release from the formulations was between 74.52% and 92.87% for F1 and F4. In vitro cytotoxicity assays indicate that PTX having p (DLLA:CO60:40) nanoparticles have a higher cytotoxic effect on MCF‐7/ADR.