Pyridine solvated dioxouranium complex with salen ligand: Synthesis,characterization and luminescence properties

A new derivative of dioxouranium(VI) salen complex, [UO2(L)(pyridine)], where [L = N,N′-Bis(2-hydroxybenzylidene)-2,2-dimethyl-1,3-propanediamine] is synthesized and characterized by elemental analysis (C, H, N), FT-IR, ESI-MS spectrometry, UV/Vis, fluorescence, ¹H and ¹³C NMR spectroscopy and thermal gravimetric (TG) study. Furthermore, the single crystal X-ray diffraction measurements of the complex were carried out at 100 and 273 K. The crystal structure measurements revealed that the complex has distorted pentagonal bipyramidal geometry with uranium atom located at the centre and bonded to two phenoxy oxygen and two azomethine nitrogen in tetradenate fashion and one nitrogen from pyridine making it seven coordinated. In addition, the photoluminescence property of the complex was also recorded.     

Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

A tetra-coordinate nickel(II) complex as neutral carrier for nitrate-selective PVC membrane electrode

The potentiometric response properties and applications of a tetra-coordinate nickel(II) complex with relatively high selectivity toward nitrate ion are described. The nickel(II) complex of 5,7,12,14-tetramethyl-1,4,8,11-tetraazacyclotetradeca-4,6,11,13-tetraene was used as a neutral carrier into plasticized poly(vinyl chloride) (PVC) membrane. The influence of several variables was investigated in order to optimize the potentiometric response and selectivity of the electrode. The resulting membrane electrode incorporating 31.0% PVC, 61.0% dioctyl phthalate (DOP) as plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% carrier (all w/w) demonstrates a Nernstian response slope of −59.6 mV per decade over the concentration range of 5×10⁻⁶-1×10⁻¹ M NO₃⁻. The electrode exhibits a fast response time (≤10 s), a detection limit of 2.5×10⁻⁶ M, and can be used over a wide pH range of 4-12. The electrode shows improved selectivity in comparison to most of the previously reported nitrate-selective electrodes. It was successfully applied to the determination of nitrate ion in natural water samples.     

Spectrophotometric determination of isonicotinic acid hydrazide

Summary Isonicotinic acid hydrazide reacts with 2,3,5-triphenyltetrazolium chloride in acidic medium in presence of excess of thallium(III) to give a pink-coloured formazan having maximum absorption at 480 nm. This colour reaction is used to determine isonicotinic acid hydrazide in urine and blood. The reaction is specific for isonicotinic acid hydrazide, and the visual limit of identification is1 g per ml.

---

Zusammenfassung Isonikotinsäurehydrazid reagiert mit 2,3,5-Triphenyltetrazoliumchlorid in saurem Milieu bei Gegenwart von überschüssigem Thallium(III) unter Bildung eines rosa gefärbten Formazans mit dem Absorptionsmaximum bei 480 nm. Diese Farbreaktion wird zur Bestimmung von Isonikotinsäurehydrazid in Harn und Blut verwendet. Sie ist spezifisch. Ihre Erfassungsgrenze beträgt 1g/ml.

---

Résumé L'hydrazide de l'acide isonicotinique réagit avec le chlorure de triphényl-2,3,5 tétrazolium, en milieu acide en présence d'un excès de thallium-III, en donnant un formazan coloré en rose dont le maximum d'absorption se situe à 480 nm. On utilise cette réaction colorée pour doser l'hydrazide de l'acide isonicotinique dans l'urine et dans le sang. La réaction est spécifique et la limite d'identification visuelle est de 1g par ml.

     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

Applications of Inorganic Polymeric Materials, III: Polyphosphazenes

Polyphosphazenes form one of the most important and interesting classes of inorganic polymers having a backbone of alternating phosphorus and nitrogen atoms with phosphorus atom bearing two organic side groups. The most important feature of these polymers is the synthesis route which allows the side groups to be changed over a wide range to obtain a broad variety of products with different properties from elastomers to glasses, water soluble to hydrophobic polymers, bioinert to bioactive materials, and electrical insulators to conductors. In this paper, some novel applications of these polymers in biomedical materials and advanced devices are reviewed.     

Poly(4-vinylpyridine)：As a green, efficient and commercial available basic catalyst for the synthesis of chromene derivatives

Poly(4-vinylpyridine) is reported as a green,commercial available and efficient basic recyclable catalyst for the synthesis of chromene derivatives.This catalyst can be easily recovered by simple filtration and recycled up to 5 consecutive runs without any loss of its efficiency.     

Solvothermal Synthesis and Characterization of PbSe Nanostructures with the Aid of Schiff-base Ligand

In this work, Pb(II)N,N-bis(salicylidene)-ethylenediamine; [Pb(salen)]; was applied as lead precursor to synthesis PbSe nanostructures. Besides [Pb(salen)], SeCl₄ and reducing agents like N₂H₄·H₂O have been employed for the production of PbSe nanostructures via a solvothermal route at 180 °C for 3 h in propylene glycol. The effect of preparation factors such as temperature, reaction time, and surfactant on the morphology of PbSe nanostructures was investigated. The experimental results indicated that PbSe synthesized at 150 and 210 °C was composed of agglomerated particles. On the other hand, the use of KBH₄ as reducing agent led to produce PbSe with higher particle size and agglomeration. The as-prepared PbSe nanostructures were characterized by XRD, SEM, TEM, EDS, and FT-IR.