Linear and nonlinear fluctuations of electron-temperature-gradient driven mode and electron acoustic mode in a two-electron temperature nonthermal magnetized plasma

Nonlinear vortical structures and soliton formation are investigated for electron temperature gradient instability in a two-electron temperature non-Maxwellian magnetoplasma. The inhomogeneity in magnetic field is also considered. A new set of nonlinear equations, using transport equations of Braginskii”s model, are formulated to study the nonlinear structures. A modified linear dispersion relation of coupled electron temperature gradient (ETG) mode and electron acoustic wave is derived. The ETG instability is found to increase with increase in η_ec value that increases with sharp density gradients. The results are applied to auroral region of earth's magnetosphere and the calculated values of the nonlinear electric field of fast solitary waves are found to be in agreement with the Viking satellite observations.     

Modelling and measuring the thermal conductivity of multi-metallic Zn/Cu nanofluid

A metallic nanofluid is a suspension of metallic nanoparticles in a base fluid. Multi-metallic nanoparticles are a combination of two or more types of metallic particles. Such multi-metallic nanoparticles were suspended in water using an ultrasonic vibrator for different total volume fractions and different ratios of metallic/metallic nanoparticles. A transient hot wire setup was built to measure the thermal conductivity of the nanofluid at different temperatures. The experimental results were in good agreement with the results in the literature. Then, the experimental results were used as input data for an adaptive neural fuzzy inference system (ANFIS) to predict the thermal conductivity of the multi-metallic nanofluid. The maximum deviation between the ANFIS results and experimental measurements was 1 %. The predicted results and the experimental data were compared with other models. The ANFIS model was found to have good ability to predict the thermal conductivity of the multi-metallic nanofluid over the range of the experimental results.     

Stability indicating HPLC method for the simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations

ABSTRACT: BACKGROUND: A simple, specific, and fast stability indicating reverse phase liquid chromatographic method was established for instantaneous determination of moxifloxacin and prednisolone in bulk drugs and pharmaceutical formulations. RESULTS: Optimum chromatographic separations among the moxifloxacin, prednisolone and stressinduced degradation products were achieved within 10 minutes by use of BDS Hypersil C8 column (250 X 4.6 mm, 5 mum) as stationary phase with mobile phase consisted of a mixture of phosphate buffer (18 mM) containing 0.1% (v/v) triethylamine, at pH 2.8 (adjusted with dilute phosphoric acid) and methanol (38:62 v/v) at a flow rate of 1.5 mL min-1. Detection was performed at 254 nm using diode array detector. The method was validated in accordance with ICH guidelines. Response was a linear function of concentrations over the range of 20-80 mug mL-1 for moxifloxacin (r2 [greater than or equal to] 0.998) and 40-160 mug mL-1 for prednisolone (r2 [greater than or equal to] 0.998). The method was resulted in good separation of both the analytes and degradation products with acceptable tailing and resolution. The peak purity index for both the analytes after all types of stress conditions was [greater than or equal to] 0.9999 indicated a complete separation of both the analyte peaks from degradation products. The method can therefore, be regarded as stabilityindicating. CONCLUSIONS: The developed method can be applied successfully for simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations and their stability studies.     

Synthesis of Carboxylic Acids by Palladium‐Catalyzed Hydroxycarbonylation

The synthesis of carboxylic acids is of fundamental importance in the chemical industry and the corresponding products find numerous applications for polymers, cosmetics, pharmaceuticals, agrochemicals, and other manufactured chemicals. Although hydroxycarbonylations of olefins have been known for more than 60 years, currently known catalyst systems for this transformation do not fulfill industrial requirements, for example, stability. Presented herein for the first time is an aqueous‐phase protocol that allows conversion of various olefins, including sterically hindered and demanding tetra‐, tri‐, and 1,1‐disubstituted systems, as well as terminal alkenes, into the corresponding carboxylic acids in excellent yields. The outstanding stability of the catalyst system (26 recycling runs in 32 days without measurable loss of activity), is showcased in the preparation of an industrially relevant fatty acid. Key‐to‐success is the use of a built‐in‐base ligand under acidic aqueous conditions. This catalytic system is expected to provide a basis for new cost‐competitive processes for the industrial production of carboxylic acids.     

Efficient Synthesis of Novel Plasticizers by Direct Palladium-Catalyzed Di- or Multi-carbonylations

Diesters are of fundamental importance in the chemical industry and are used for many applications, e.g. as plasticizers, surfactants, emulsifiers, and lubricants. Herein, we present a straightforward and efficient method for the selective synthesis of diesters via palladium-catalyzed direct carbonylation of di- or polyols with readily available alkenes. Key-to-success is the use of a specific palladium catalyst with the “built-in-base” ligand L16 providing esterification of all alcohols and a high n/iso ratio. The synthesized diesters were evaluated as potential plasticizers in PVC films by measuring the glass transition temperature (T_g) via differential scanning calorimetry (DSC).     

Simultaneous operation of dibenzothiophene hydrodesulfurization and methanol reforming reactions over Pd promoted alumina based catalysts

In the current study simultaneous reactions of hydrodesulfurization(HDS) of dibenzothiophene(DBT) and reforming of methanol in a micro-autoclave reactor were studied over bi-metallic(Co-Mo/Al2O3 and Ni-Mo/Al2O3) and tri-metallic(Pd-Co-Mo/Al2O3 and Pd-Ni-Mo/Al2O3) catalyst systems which were prepared by incipient impregnation method.In situ hydrogen utilization and low Pd loadings were the major targets of this study.For comparison purpose,catalytic activity was separately determined for both the methanol reforming and HDS of DBT reactions as well.Ni based catalysts were confirmed with better activity than Co ones for both the reactions with Pd promoted ones ranking at the top i.e.Pd-Ni-Mo/Al2O3 > Ni-Mo/Al2O3 > Pd-Co-Mo/Al2O3 > Co-Mo/Al2O3 where Pd-Ni-Mo/Al2O3 showed 91% DBT conversion at 380 ℃ and 12 h reaction time.Some of the selected organic additives on catalytic activity were tested for their effect toward HDS reaction which was unique with close relation to their chemical nature.Reaction products were quantitatively and qualitatively analyzed via HPLC and GC-MS techniques respectively which helped in elucidating reaction mechanism.     

Stability indicating HPLC method for the simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations

Background

Obtaining new pharmaceutical materials with enhanced properties by using natural compounds and environment-friendly methods is a continuous goal for scientists. Ficaria verna Huds. is a widespread perennial plant with applications in the treat of haemorrhoids and to cure piles; it has also anti-inflammatory, astringent, and antibiotic properties. The goal of the present study is the obtaining and characterization of new F. verna extract/??-cyclodextrin complexes by using only natural compounds, solvents, and environment-friendly methods in order to increase the quality and acceptability versus toxicity indicator. Thus, the flavonoid content (as quercetin) of Ficaria verna Huds. flowers and leaves from the West side of Romania was determined and correlated with their antioxidant activity. Further, the possibility of obtaining ??-cyclodextrin supramolecular systems was studied.

Results

F. verna flowers and leaves extracts were obtained by semi-continuous solid-liquid extraction. The raw concentrated extract was spectrophotometrically analyzed in order to quantify the flavonoids from plant parts and to evaluate the antioxidant activity of these extracts. The F. verna extracts were used for obtaining ??-cyclodextrin complexes; these were analyzed by scanning electron microscopy and Karl Fischer water titration; spectrophotometry was used in order to quantifying the flavonoids and evaluates the antioxidant activity. A higher concentration of flavonoids of 0.5% was determined in complexes obtained by crystallisation method, while only a half of this value was calculated for kneading method. The antioxidant activity of these complexes was correlated with the flavonoid content and this parameter reveals possible controlled release properties.

Conclusions

The flavonoid content of F. verna Huds. from the West side of Romania (Banat county) is approximately the same in flowers and leaves, being situated at a medium value among other studies. ??-Cyclodextrin complexes of F. verna extracts are obtained with lower yields by crystallisation than kneading methods, but the flavonoids (as quercetin) are better encapsulated in the first case most probably due to the possibility to attain the host-guest equilibrium in the slower crystallisation process. F. verna extracts and their ??-cyclodextrin complexes have antioxidant activity even at very low concentrations and could be used in proper and valuable pharmaceutical formulations with enhanced bioactivity.     

Ion-Temperature-Gradient-Driven Modes with Nonthermal Electron Distributions in Bi-ion Dusty Magnetoplasma

The effect of nonthermal distributions of electrons on ion-temperature-gradient (ITG)-driven drift modes in the presence of tiny dust particles for bi-ion magneto plasmas is investigated. The dynamics of bi-ions and dust particles is considered for the study of low-frequency (less than the gyrofrequencies of dust and ions) ITG mode. A new dispersion relation is derived and analyzed numerically as well as analytically. Three different distributions for nonthermal electrons (Kappa, q, and Cairns distribution) are used. It is found that the presence of nonthermal electrons in bi-ion dusty magnetoplasma reduces the growth rate of the ITG instability. These results should be useful for laboratory and space plasmas where nonthermal electrons and dust is always present.     

Investigating the existence of nonthermal/specific microwave effects using silicon carbide heating elements as power modulators

The use of passive heating elements made out of chemically inert sintered silicon carbide (SiC) allows microwave transparent or poorly absorbing reaction mixtures to be heated under microwave conditions. The cylindrical heating inserts efficiently absorb microwave energy and subsequently transfer the generated thermal energy via conduction phenomena to the reaction mixture. In the case of low to medium microwave absorbing reaction mixtures, the addition of SiC heating elements results in significant reductions (30-70%) in the required microwave power as compared to experiments performed without heating element at the same temperature. The method has been used to probe the influence of microwave power (electromagnetic field strength) on chemical reactions. Six diverse types of chemical transformations were performed in the presence or absence of a SiC heating element at the same reaction temperature but at different microwave power levels. In all six cases, the measured conversions/yields were similar regardless of whether a heating element was used or not. The applied microwave power had no influence on the reaction rate, and only the attained temperature governed the outcome of a specific chemical process under microwave conditions.     

Rectangular Tubular Steel Columns Loaded Biaxially

An inelastic analysis of rectangular tubular steel columns subjected to a constant axial load and a gradually increasing biaxial end moment is presented. Analytical thrust-moment-curvature relationships are given for the cross section with bilinear material stress-strain characteristics. An iterative procedure based on column deflection curves is used to predict moment-deflection curves up to collapse, and numerical examples are given for square and rectangular tubular steel columns. The interaction of biaxial moments, as well as the effect of strain-hardening, is explained for the non-proportional loading considered. The technique can be modified for beam-columns with other types of end moments.