Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Aromatic-aromatic interactions in crystal structures of helical peptide scaffolds containing projecting phenylalanine residues

Aromatic-aromatic interactions between phenylalanine side chains in peptides have been probed by the structure determination in crystals of three peptides: Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, I; Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, II; Boc-Aib-Ala-Phe-Aib-Phe-Ala-Val-Aib-OMe, III. X-ray diffraction studies reveal that all three peptides adopt helical conformations in the solid state with the Phe side chains projecting outward. Interhelix association in the crystals is promoted by Phe-Phe interactions. A total of 15 unique aromatic pairs have been characterized in the three independent crystal structures. In peptides I and II, the aromatic side chains lie on the same face of the helix at i/i + 4 positions resulting in both intrahelix and interhelix aromatic interactions. In peptide III, the Phe side chains are placed on the opposite faces of the helix, resulting in exclusive intermolecular aromatic interactions. The distances between the centroids of aromatic pair ranges from 5.11 to 6.86 A, while the distance of closest approach of ring carbon atoms ranges from 3.27 to 4.59 A. Examples of T-shaped and parallel-displaced arrangements of aromatic pairs are observed, in addition to several examples of inclined arrangements. The results support the view that the interaction potential for a pair of aromatic rings is relatively broad and rugged with several minima of similar energies, separated by small activation barriers.     

Binding constant measurement by hyper-Rayleigh scattering: bilirubin-human serum albumin binding as a case study

In this paper, a new application of the hyper-Rayleigh scattering technique in determining multiple binding constants of a small molecule like bilirubin to a macromolecule like the protein human serum albumin has been demonstrated. Human serum albumin has two binding sites for bilirubin, and the binding constants have been measured by carrying out a second harmonic titration of the protein against bilirubin and vice versa. The measured binding constants K(1) = 1.5 +/- 0.43 x 10(7) M(-1) and K(2) = 1.01 +/- 0.16 x 10(6) M(-1) agree well with the reported values obtained by other methods.     

A study on the mechanism of failure in keratin

The mechanical behavior of keratin is studied, focusing on the mechanism of failure. For this purpose, a new procedure has been suggested to differentiate the time-dependent and time-independent losses of energy at different strain levels. The matrix of keratin fibers was found to play an important role in the mechanism of failure.     

Analyses of carcinogenic aromatic amines released from harmful azo colorants by Streptomyces SP. SS07

Extracellular fluid protein (ECFP) of Streptomyces species SS07 has been used to reduce water soluble azo dyes and the carcinogenic amines released have been compared with that from chemical reduction. The effect of temperature, pH and contact time on the recovery of amines using ECFP was studied. The ECFP releases carcinogenic amines at a pH of 9.2 and a temperature of 37 degrees C for a contact period of 24 h. The reduction products were analyzed with HPLC and their structures confirmed by LC-MS and GC-MS. It was observed that both the ECFP and chemical reduction methods released similar type of amine products. In the case of dye samples, compared to chemical reduction, 5-20% increase in the release of carcinogenic amines by ECFP was observed. The percentage of amine products released by chemical reduction was higher for leather garment samples compared to ECFP treatment.     

Pd-Co-Mo electrocatalyst for the oxygen reduction reaction in proton exchange membrane fuel cells

The catalytic activity of carbon supported Pd-Co-Mo for the oxygen reduction reaction (ORR) in a single cell proton exchange membrane fuel cell (PEMFC) has been investigated at 60 degrees C and compared with data from commercial Pt catalyst and our previously reported Pd-Co-Au and Pd-Ti catalysts. The Pd-Co-Mo catalyst with a Pd:Co:Mo atomic ratio of 70:20:10 exhibits slightly higher catalytic activity like the Pd-Co-Au catalyst than the commercial Pt catalyst, but with excellent chemical stability unlike the Pd-Co-Au catalyst. The Pd-Co-Mo catalyst also exhibits better tolerance to methanol poisoning than Pt. Investigation of the catalytic activity of the Pd-Co-Mo system with varying composition and heat treatment temperature reveals that a Pd:Co:Mo atomic ratio of 70:20:10 with a heat treatment temperature of 500 degrees C exhibits the highest catalytic activity. Although the degree of alloying increases with increasing temperature from 500 to 900 degrees C as indicated by the X-ray diffraction data, the catalytic activity decreases due to an increase in particle size and a decrease in surface area.     

Solvent-adaptable silver nanoparticles

A simple and efficient way of obtaining silver nanoparticles that are dispersible both in organic and in aqueous solvents using a single capping agent is described. The silver nanoparticles are initially prepared in water in the presence of aerosol OT [sodium bis(2-ethylhexyl)-sulfosuccinate, AOT]. Thereafter, transfer of the AOT-capped silver nanoparticles to an organic phase is induced by the addition of a small amount of orthophosphoric acid during shaking of the biphasic mixture. The AOT-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder. The hydrophobic nanoparticles thus prepared are stable and are readily resuspended in a variety of other polar (including water) and nonpolar solvents without further surface treatment. The amphiphatic nature of the silver surface is brought about by a small orientational change in the AOT monolayer on the silver surface in response to the polarity of the solvent.     

Asymmetric synthesis of (+)-stagonolide C and (−)-aspinolide A via organocatalysis

A new enantioselective synthesis of two important fungal metabolites, (+)-stagonolide C and (?)-aspinolide A, has been described from readily available raw materials. Proline catalyzed asymmetric α-aminooxylation and Jorgensen’s epoxidation of aldehydes are the key reactions employed in the introduction of chirality. The formation of the 10-membered lactone core structure was finally accomplished via Steglich esterification and ring closing metathesis reactions.