碳纳米纤维负载钯催化剂的制备及其催化性能研究

通过静电纺丝和碳化技术,将聚丙烯腈制备成碳纳米纤维并用于负载钯催化剂.扫描电镜(SEM)表征结果显示，碳化过程虽使部分纤维融合,但纤维结构保持良好;透射电镜(TEM)图显示，碳化过程中Pd原子有一定程度地聚集,形成了直径约为15nm的颗粒.催化结果表明，该催化剂对碘代芳烃和丙烯酸酯的Heck偶联反应具有良好的催化活性,生成物反式肉硅酸酯的产率较高;该催化剂至少可以重复使用5次（保持催化活性不变）,显示出良好的稳定性.     

电光全内反射调制

研究各种无侵袭电光采样技术,尤其是研究电信号在半导体中的传播技术是有意义的。通常是根据施加电场所引起的寻常光线和非常光线的指数变化来讨论电光效应,这种变化与外加电场成正比。调制电场和光场之间电光晶体中的相互作用产生光场的垂直分量。把电光晶体放在交叉偏振器之间,这种效应可以转换为一种强度调制。     

(■)与三段论

如何用数理逻辑的观点表述三段论,这是值得我们探讨的问题,现就自己的肤浅体会叙述如下: 一、逻辑依据: 在推理中,三段论是重要的推理形式,应用很广泛。那么,什么是三段论推理的逻辑依据呢?这在形式逻辑中是通过三段论公理表达的。三段论公理的内容为“凡是肯定了(或否定了)     

超细CaO粉炉内喷射脱硫的实验研究

本文对超细ＣａＯ粉炉内喷射脱硫进行了实验研究，分析了可能影响超细ＣａＯ粉炉内脱硫效率的多种因素，实验结果表明：使用预先锻烧生成的超细ＣａＯ粉在并不苛刻的反应条件下脱硫效果很好，颗粒大小、反应区温度、反应时间和Ｃａ／Ｓ比对炉内喷钙脱硫的效率有重要的影响．     

A Quasi-Symmetric Coupled Quantum Well and Its Electric-Optical Properties

We propose a novel coupled quantum well structure, i.e. a quasi-symmetric coupled quantum well (QSCQW). Based on the demands of optical switching devices for quantum well materials, the QSCQW configuration is further optimized. Consequently, in the case of low applied electric field 25kV/cm and low absorption loss 100cm^-1, a large field-induced refractive index change (for TE mode, n = 0.0106; for TM mode, n = 0.0115) is obtained in the QSCQW structure at the operation wavelength 1550hm. The value is in one or two order of magnitude larger than that in a rectangular quantum well and about 50% larger than that of five-step asymmetric coupled quantum well structure under the same working conditions. The refractive index change obtained with the optimized QSCQW under so low absorption loss and applied electric field is very attractive for semiconductor optical switching devices. This manifests that the QSCQW structure has a great potential for applications in ultra-fast and low-voltage optical switches and in travelling wave modulators.     

凹整数规划的分枝定界解法

凹整数规划是一类重要的非线性整数规划问题，也是在经济和管理中有着广泛应用的最优化问题．本文主要研究用分枝定界方法求解凹整数规划问题，这一方法的基本思想是对目标函数进行线性下逼近，然后用乘子搜索法求解连续松弛问题．数值结果表明，用这种分枝定界方法求解凹整数规划是有效的．     

A Compact Magnetically Insulated Line Oscillator with New-Type Beam Dump

We present a compact improved model of the magnetically insulated line oscillator with new-type beam dump and other novel features. In the experiments, high-power microwave of the TM01 mode is generated from the device with a frequency range of 1.73-1.78 GHz and a peak power level of above 2 GW, when the diode voltage is taken in the range 520-540kV, and the diode current is in the range 58-62kA. This confirms the simulation results.     

Multiparty Quantum Secret Sharing of Key Using Practical Faint Laser Pulses

Based on a bidirectional quantum key distribution protocol [Phys. Rev. A 70 (2004)012311], we propose a (m-1, m-1)-threshold scheme of m (m≥3)-party quantum secret sharing of key by using practical faint laser pulses. In our scheme, if all the m-1 sharers collaborate, they can obtain the joint secret key from the message sender. Our scheme is more feasible according to the present-day technology.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.